Pyle PLPTS2X2 Owner's manual

Pyle
Brand
Pyle
Model
PLPTS2X2
Category
Notebook arms & stands
Type
Owner's manual

Pyle PLPTS2X2 Universal Device Stand

Pyle PLPTS2X2 is a universal device stand that can be used to hold a variety of devices, including laptops, notebooks, mixers, and DJ equipment. It is height adjustable, making it perfect for use on a variety of surfaces. The stand is also lightweight and portable, making it easy to take with you wherever you go.

Some of the key features of the Pyle PLPTS2X2 include:

  • Universal design that can hold a variety of devices
  • Height adjustable for use on a variety of surfaces
  • Lightweight and portable for easy transport
  • Quick and easy setup
  • Angle adjustable device tray

Pyle PLPTS2X2 Universal Device Stand

Pyle PLPTS2X2 is a universal device stand that can be used to hold a variety of devices, including laptops, notebooks, mixers, and DJ equipment. It is height adjustable, making it perfect for use on a variety of surfaces. The stand is also lightweight and portable, making it easy to take with you wherever you go.

Some of the key features of the Pyle PLPTS2X2 include:

  • Universal design that can hold a variety of devices
  • Height adjustable for use on a variety of surfaces
  • Lightweight and portable for easy transport
  • Quick and easy setup
  • Angle adjustable device tray
PLPTS2X2
Universal Device Stand
Height Adjustable Tripod Mount For Laptop,
Notebook, Mixer, DJ Equipment, (Pair)
Use the included hardware to secure the device resting
plate with the metal mounting clamps. The holes in the
mounting clamp brackets should align with the holes
protruding through the base plate. Be sure to use a washer
between the wing nut and the metal mounting clamp
when securing.
The plate bolts are to be inserted from the top of the unit,
going downward through the device resting plate, and out
of the other end to meet the metal mounting brackets.
The metal mounting bracket clamps can be adjusted or
loosened accordingly to allow for angle/tilt adjustment.
www.PyleUSA.com
2
Slide the metal mounting clamps onto both ends of the
extension arm. Each side is tted with rubber grips that the
clamps use for holding support. Be sure as to, at least partially,
slide the metal mounting clamps to lay over the rubber grips.
Use the dual clamp-style knobs on both sides on each of
the mounting clamps to secure the angle and placement of
the device resting plate.
4 Mounting Clamps 8 Wing Nuts 8 Plate Bolts
2 Device Resting Plate 2 Extension Arm 2 Folding Tripod Base 8 Washers
Features:
• Universal Device Stand
• Quick & Easy Setup
• Tripod Floor-Standing Design
• Lightweight, Portable & Reliable
• Quick & Convenient Height Adjustment
• Angle Adjustable Device Tray
• Rugged & Durable Metal Construction
• Disassembles for Travel & Storage
• Works with Audio/Video Devices, DJ Sound Equipment
(Laptops, Notebooks, Mixers, Ampliers, etc.)
• Used by Musicians, DJs, Performers, Engineers, etc.
• For On-Stage or In-Studio Use
What's in the Box:
• (2) Universal Device Stand
Technical Specs:
• *Some Assembly Required
• Height Adjustable: 22.0'' - 35.0'' -inches
• Construction Material: Metal Stand, Engineered ABS Shelf
• Shelf / Device Tray Size (L x W): 14.0'' x 11.0'' -inches
www.PyleUSA.com
3
This products can expose you to a chemical or group of checmicals, which
may include ”Lead And Cadmium” which is known in the state of California to
cause cancer, birth defects, or other reproductive harm. For more info, go to
https://www.p65warnings.ca.gov/.
Slide the assembled extension arm and device resting plate
into the assembled folding tripod base with the inserted
extension arm tting insert. The top clamp style knob allow
for height adjustment by raising or lowering the unit's
extension arm. The lower clamp style knob allows for securing
the stand's stability when the tripod legs are extended.
The unit also features a safety pin that acts as a backup for
the stand's height adjustment safety.
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: [email protected]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Pyle PLPTS2X2 Owner's manual

Pyle
Brand
Pyle
Model
PLPTS2X2
Category
Notebook arms & stands
Type
Owner's manual

Pyle PLPTS2X2 Universal Device Stand

Pyle PLPTS2X2 is a universal device stand that can be used to hold a variety of devices, including laptops, notebooks, mixers, and DJ equipment. It is height adjustable, making it perfect for use on a variety of surfaces. The stand is also lightweight and portable, making it easy to take with you wherever you go.

Some of the key features of the Pyle PLPTS2X2 include:

  • Universal design that can hold a variety of devices
  • Height adjustable for use on a variety of surfaces
  • Lightweight and portable for easy transport
  • Quick and easy setup
  • Angle adjustable device tray
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents