Page is loading ...
LED Moving Head E60 Spot
Page | 2
Congratulations!
You have acquired an excellent and innovative product from ETEC. In order to ensure the greatest
possible performance of the device, read this manual carefully and familiarize yourself with the most
important functions. This manual contains important information on the operation and maintenance
of this unit. Please keep this manual for future reference, together with the device.
Unpacking:
Please unpack the product immediately after receipt and check it for completeness and integrity. If
you notice any damage to the transport of one or more parts of the product or package, please notify
the seller immediately and collect the packaging material for later inspection. Keep the carton and all
related packaging materials. If the product needs to be returned, please make sure you return it in
the original packaging.
Provisional useful life of the LED headlamp:
The brightness of LEDs decreases with time. The main cause is HEAT because it speeds up the
process. When LEDs are placed very close together, they are exposed to a higher operating
temperature than when an ideal distance is maintained or operated under optimal conditions, ie
individually. For this reason, the useful life is significantly reduced when all color LEDs are operated
with maximum brightness. The service life achievable under normal operating conditions is
approximately between 40,000 and 50,000 hours. If the prolongation of the service life is of great
importance to you, you should ensure that the operating temperature is kept low. An air-conditioned
operating environment and the reduction of the overall luminous intensity can contribute to this.
Warnings
ATTENTION!
Protect the device from rain and moisture!
Disconnect the power cord before opening the housing!
PLEASE READ THESE INSTRUCTIONS FOR YOUR SAFETY CAREFULLY,
BEFORE OPERATING THE UNIT FOR THE FIRST TIME!
Safety instructions:
All persons who must install, operate, and maintain this equipment:
• Be qualified and
• Follow the instructions in this manual.
Page | 3
Warnings
ATTENTION!
Protect the device from rain and moisture!
Disconnect the power cord before opening the housing!
PLEASE READ THESE INSTRUCTIONS FOR YOUR SAFETY CAREFULLY,
BEFORE OPERATING THE UNIT FOR THE FIRST TIME!
Safety instructions:
All persons who must install, operate, and maintain this equipment:
• Be qualified and
• Follow the instructions in this manual.
ATTENTION! EYE DAMAGE!
Never look directly into the light source.
(Especially epileptics)!
Intended Use
• This unit is not suitable for continuous operation. Maintaining regular operating breaks
increases the life of the unit.
• The minimum distance between the light source and the illuminated area is 0.5 meters
• The maximum ambient temperature for operation is ta = 45 ° C and must never be
exceeded.
• The relative humidity must not exceed 50% at an ambient temperature of 45 ° C.
• If the appliance is not used as described in this manual, it could be damaged and the
warranty void.
• Any improper use will lead to risks such as: Short circuits, burns,
• Electric shock, crashes, etc.
Your safety and the people you surround are in danger!
Page | 4
Installation:
Observe the European and international guidelines for installation, mounting on trusses and all other
safety measures. Do not attempt to install the unit yourself! Always have the installation carried out
by qualified personnel!
The mounting stand or the installation wall must be capable of carrying 10 times the weight of the
appliance without deforming. When mounting, the device must be secured with a second safety
fixture, such as a suitable safety cable. Never place yourself directly underneath the unit during
fixing, dismantling or maintenance.
Overhead mounting requires a professional experience, including calculating the load capacities, the
mounting material used, and periodic safety inspections of the entire mounting material and
equipment. If you do not have these qualifications, you should refrain from performing an
installation yourself. The installation should be inspected once a year by a suitably trained specialist.
Power connections:
Connect the device to the power supply with the mains cable. Always ensure that the colored cables
are connected to the appropriate, correct locations.
International
Europe Cable
UK Cable
USA Cable
PIN
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
ZERO
YELLOW-GREEN
GREEN
GREEN
GROUND
Make sure that the device is always properly grounded!
Disposal
Do not throw the appliance into normal household waste at the end of its useful life. This product is
subject to European Directive 2002/96 / EC.
• Dispose of the product via an approved disposal company or through your municipal waste
disposal facility.
• Observe the current regulations. If in doubt, contact your disposal facility.
• The packaging is certified by a dual system. Dispose of all packaging materials in
an environmentally friendly manner according to local regulations.
Page | 5
Maintenance
The device is almost maintenance-free. Nevertheless, the device should be cleaned regularly. If the
unit is not cleaned regularly, the light output of the unit will be considerably reduced over time.
Disconnect the unit from the mains and wipe it with a damp cloth. Never immerse the unit in any
liquid. Clean the unit with a soft cloth. Do not use alcohol or solvents. The connections should also be
cleaned regularly. Disconnect the device from the mains and wipe the connections with a cloth.
Ensure that all connections are completely dry before you connect or reconnect the device to other
devices.
The operator must ensure that all safety-relevant and mechanical devices are subjected to a
technical inspection test by qualified personnel after four years. The operator must ensure that all
safety-related and mechanical devices are inspected once a year by qualified personnel.
The following points must be considered during the inspection:
1. All screws used to install the product or parts of the product must be secured and not
corroded.
2. Neither the housing nor the fixtures or the places where the product is attached may be
deformed.
3. Mechanically moving components, such as axes, lenses, etc., must not have any wear marks.
4. Power cables must be undamaged and must not show any signs of material fatigue.
Replace fuse
Overvoltages, short circuits or unsuitable mains connections can cause a fuse to burn through. The
device does not work when the fuse is blown. If your device burns a backup, perform the following
steps.
1. Disconnect the mains plug.
2. Insert a flat screwdriver into the slot of the fuse cover. Lever the cover gently. The fuse now
comes to light.
3. Remove the old backup. If you look brown or milky, it is burned.
Page | 6
4. Insert the new fuse into the holder. Close the cover. Use only a fuse of the same type and the
same specifications. Observe the label with the technical data.
Product description:
The Moving Head E60 is a head-mounted headlamp and is equipped with an efficient ultra-bright
white 60 watt LED. It can be controlled in DMX modes with 8 or 16 channels or alternatively operated
as a single device program- or music-controlled. An LED display as well as the control buttons Mode,
Value Up and Value Down ensure easy operation.
The device can be operated with seven different gobos as well as an open spot and offers 7
extremely rich colors. With a swivel angle of 540 ° and 270 ° with automatic correction and functions
such as dimmer, shutter, motorized focus, prism and high-frequency stroboscopic effects, the
Moving Head E60 is a versatile device for creative lighting concepts and amazing effects.
Other features include low overall weight, XLR DMX connectors, powerCON power sockets, and an
active cooling system for trouble-free operation.
Technical specifications:
Power consumption: 120W
Power supply: 100 - 240V
Voltage frequency: 50 / 60Hz
Diod Type: White
Number of diodes: 1
Diode power: 60 watts
Beam angle: 13 °
Display: LCD matrix
Color: 1 color wheel 7 colors + white
Dimmer: Linear: 0 - 100%
Number of DMX channels: 8 or 16
DMX standard: DMX 512
Control interface: 4 buttons
Operating modes: DMX512, automatic, music-
controlled, manual, master / slave
AC IN: powerCON
AC OUT: powerCON
DMX IN: XLR - 3-pin
DMX OUT: XLR - 3-pin
Protection class: IP20
Housing: ABS
Measurements: 270x140x380mm
Weight: 7.8 kg
Page | 7
Product Overview:
1. LED Diode
2. Display
3. Button: Mode, Up, Down, Enter
4. PowerCON IN/OUT
5. ON / OFF switch
6. Security
7. DMX linking IN/OUT
Funktionen und Einstellungen:
LCD Display
MENU: Function mode selection, such as DMX, Master / Slave, Auto, Sound Mode and Brightness
settings
DOWN/UP: Previous or Next function
Enter: Confirm and save the selection
1.
6.
7.
2.
3.
4.
5.
Page | 8
Menu overview:
DMX address
DMX address = 0001
operation mode
DMX 15 ch
YES
DMX 6 ch
Auto
Auto Program 1
Auto Program 2
Auto Program 3
Auto Program 4
Auto Program 5
Auto Program 6
Auto Program 7
Auto Program 8
Sound control
YES
Slave
YES
Language
selection
Englisch
YES
����
YES
Extended
attitude
PAN Revers
Tilt Revers
Display Revers
Factory setting
starting position
password
xxx (018)
PAN
-128 ~ +127
Tilt
-128 ~ +127
Dimmer
-128 ~ +127
Colour
-128 ~ +127
Rotation Gobo
-128 ~ +127
focus
-128 ~ +127
Mic.Empfindlichkeit
000-100
System Info
Aktuelle Zeit
Gesamtzeit
Aktueller Modus
Temperatur
Software Version
E60-V1.06
Manuell
Pan
000 - 255
Tilt
000 - 255
P/T Speed
000 - 255
Dimmer
000 - 255
Strobe
000 - 255
Colour
000 - 255
Gobo
000 - 255
Gobo Rotation
000 - 255
focus
000 - 255
Prism
000 - 255
Page | 9
Setting up a DMX connection:
DMX is a standardized transmission protocol that allows all DMX-compliant models of the various
manufacturers to be connected to one another and controlled by a single mixer. Free DMX data
transfer between different DMX devices are used.
The connection arrangement between the devices has no influence on the DMX addressing. For
example, DMX address 1 has been assigned to a device, and the DMX connection position can be
positioned at the beginning, at the end or anywhere in the middle.
Therefore the first device, which is controlled by a controller, can be the last one in a row at the
same time. When the DMX address 1 has been assigned to a device, the DMX controller knows which
addressers the data send filter, no matter where the DMX cable is located.
Resistance 120 ohms 1 / 4w between PIN 2DMX -) and PIN 3 (DMX +) of the last headlight.
Attention: Avoid the contact between the general and the housing grounding of the headlight. The
general grounding may cause a loop and your headlight could only function irregularly. Test the
cables with a resistance meter to check the correct polarity and to ensure the correct polarity.
Connect the headlights:
If you want to control light shows with one or more devices with a DMX-512 controller, or you want
to play synchronized shows with two or more devices in master / slave mode, you must use a serial
data transmission line. The total number of channels required by all devices determines the number
of devices that the data transmission line can support.
The devices connected to a serial data transmission line must be connected in series. According to
the standard EIA-485, no more than 30 devices should be connected to a data transmission line.
However, if you connect more than 30 devices to a serial data transfer line without using an optical
splitter, the quality of the DMX signal may be degraded.
• Maximum recommended length of the DMX data transmission line: 100m
• Maximum recommended number of headlights on a DMX data transmission
line: 30 devices
•
With 220V: Up to 6 devices can be connected in series
DMX channel allocation:
8 DMX channels
Page | 10
Channel
DMX Value
Functions
1 Pan
000-255
Pan Move
2 Tilt
000-255
Tilt Move
3 Dimmer
000-255
Dimmer 0-100%
4 Strobe
000-004
Strobe closed
005-250
Strobe from slow to fast
251-255
Strobe open
5 Color & gobo
macros
000-007
No function
008-047
Color & Gobo macro 1
048-087
Color & Gobo macro 2
088-127
Color & Gobo macro 3
128-167
Color & Gobo macro 4
168-207
Color & Gobo macro 5
208-247
Color & Gobo macro 6
248-255
Color & Gobo changing to music-controlled
6 Color & gobo
speed
000-255
Color & Gobo speed from slow to fast
7 Motion macro
000-007
No Function
008-032
Motion macro 1
033-058
Motion macro 2
059-084
Motion macro 3
085-110
Motion macro 4
111-136
Motion macro 5
137-162
Motion macro 6
163-188
Motion macro 7
189-214
Motion macro 8
215-240
Motion macro 9
241-255
Move to sound activated
8 Reset to default
250-255
6 seconds to reset
Page | 11
16 DMX channels
channel
DMX Value
Features
1 Pan
000-255
Pan movement
2 Pan fine
000-255
Fine tuning of pan movement
3 Tilt
000-255
Tilt movement
4 Tilt fine
000-255
Fine tuning of tilt movement
5 P / T speed
000-255
Pan / Tilt speed from fast to slow
6 Dimmer
000-255
Dimmer 0-100%
7 Strobe
000-004
Strobe closed
005-250
Strobe from slow to fast
251-255
Strobe open
8 Farbe
000-004
White (offen)
086-094
Colour5
005-013
White /Farbe1
095-103
Colour5/ Colour6
014-022
Colour1
104-112
Colour6
023-031
Colour1/ Colour2
113-121
Colour6/ Colour7
032-040
Colour2
122-130
Colour7
041-049
Colour2/ Colour3
131-139
Colour8
050-058
Colour3
140-195
Color clockwise
059-067
Colour3/ Colour4
196-199
Color stop
068-076
Colour4
200-255
Color rotation
counter-clockwise
077-085
Colour 4/ Colour 5
9 Gobo
000-007
Open (white)
92-112
Gobo5
008-028
Gobo1
113-133
Gobo6
029-049
Gobo2
134-194
Gobo7
050-070
Gobo3
195-255
Gobo Rotation
071-091
Gobo4
10 Gobo Rotation
000-009
No function
010-129
Gobo rotation from fast to slow clockwise
030-134
Gobo rotation stop
135-255
GoboRotation from fast to slow counterclockwise
11 Focus
000-255
Focus
12 Prism
000-007
008-134
135-255
No function
prism
PrismRotation from slow to fast
13 Color & gobo
macros
008-147
Colour u. Gobo macro 1
048-187
Colour u. Gobo macro 2
088-127
Colour u. Gobo macro 3
128-167
Colour u. Gobo macro 4
168-207
Colour u. Gobo macro 5
208-247
Colour u. Gobo macro 6
248-255
Color & Gobo music controlled
14 Color & gobo
speed
000-255
Color & Gobo speed from slow to fast
15 motion
macros
000-007
No function
137-162
Move 6
008-032
Move 1
163-188
Move 7
033-058
Move 2
189-214
Move 8
Page | 12
059-084
Move 3
215-240
Move 9
085-110
Move 4
241-255
Movement music-
controlled
111-136
Move 5
16 Reset to default
250-255
6 seconds for reset
Concluding note:
Technical and optical changes within the scope of product improvement are reserved - even without
prior notice.
No liability shall be accepted for printing errors and resulting faulty operation. If in doubt, consult
your ETEC dealer!
Space for your notes:
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
_________________________________________________________________________________
________________________________________________________________________________
/
