Optiview IRSPD 22X User manual

IR High Speed 22X Dome Camera

Manual

Model: IRSPD 22X IR SPEED DOME

IRSPD 22X IR SPEED DOME

1

INDEX

Preface ......................................................................................................................... 3

1. Main feature.............................................................................................................. 3

2. Installation................................................................................................................. 4

3. Technical specification............................................................................................... 4

4. Setting........................................................................................................................ 6

4.1 Code Switch setting................................................................................................. 6

4.2 Speed Dome Camera Communication Protocol Setting……………………………… 7

4.3 Speed Dome Camera baud rate Setting……………………………………………….. 8

4.4 Integrative camera video TV system Setting…………………………………………… 8

4.5 RS-485 bus matching resistance setting………………………………………………… 8

5. Speed Dome Camera Address Setting……………………………………………………. 8

6. Self-test process……………………………………………………………………………. 9

7. Self-test process……………………………………………………………………………. 10

7.1 Variable speed……………………………………………………………………………. 10

7.2 Zoom speed……………………………………………………………………………….. 10

7.2 AUTO FLIP ………………………………………………………………………………….. 10

7.3 SCAN SPEED …………………………………………………………………………….. 10

7.4 PRESET FUNCTIONS …………………………………………………………………… 10

7.5 RANDOM SCANNING ………………………………………………………………….. 11

7.6 FRAME SCANNING ……………………………………………………………………..11

7.7 AUTO SCANNING …………………………………………………………………………11

7.8 Stop scanning …………………………………………………………………………….11

7.9 PATTERNS ……………………………………………………………………………….11

7.10 PARK ………………………………………………………………………………….11

7.11 AUTO FOCUS ………………………………………………………………………………..11

7.12 AUTO IRIS …………………………………………………………………………… 11

8. Operation ………………………………………………………………………… 11

9. OSD Operation ………………………………………………………………………… 14

10. OSD Menu ………………………………………………………………………………. 14

11. Main Menu …………………………………………………………………………………….15

12. Camera SETUP …………………………………………………………………………….. 15

12.1 ICON DISPLAY …………………………………………………………………………….. 17

12.2 ZOOM SPEED ………………………………………………………………………………17

12.3 DIGITAL ZOOM ………………………………………………………………………………..17

12.4 FOCUS MODE ………………………………………………………………………………17

12.5 PICTURE DISPLAY ………………………………………………………………………… 17

12.6 PICTURE NEGTIVE …………………………………………………………………………17

12.7 BLACK AND WHITE …………………………………………………………………………17

12.8 PICTURE REVERSE …………………………………………………………………………17

12.9 PICTURE FREEZE ………………………………………………………………………… 17

12.10 BACK LIGHT ………………………………………………………………………… 17

12.11 WHITE BALANCE ………………………………………………………………………17

12.12 SAVE AND UP TO TOP MENU ……………………………………………………… 17

13. PRIVACY ZONE ……………………………………………………… 18

14. PRESET POINT ……………………………………………………… …………………. 18

14.1 PRESET NUMBER ……………………………………………………… 18

14.2 PRESET SPEED …………………………………………………… 18

14.3 DWELL TIME

14.4 CHARACTER

14.5 SAVE PRESET

IRSPD 22X IR SPEED DOME

2

14.6 UP TO TOP MENU ……………………………………………………… 19

15. CRUISE SETUP

15.1 CRUISE NUMBER

15.2 PRESET INCLUDED

15.3 SAVING

15.4 TEST THE CRUISE

15.5 UP TO TOP MENU

16. PATTERN SETUP

16.1 SET PATTERN START&STOP ……………………………………………………… 20

16.2 RUN THE PATTERN

16.3 UP TO TOP MENU

17. AUTO SCAN SETUP

17.1 LEFT LIMIT TIME

17.2 SAVING LEFT LIMIT

17.3 RIGHT LIMIT TIME

17.4 SAVING RIGHT LIMIT …………………………………………………………………….21

17.5 AUTO SCAN SPEED

17.6 TEST THE AUTO SCAN

17.7 UP TO TOP MENU

18. FRAME SCAN SETUP

18.1 SET FRAME SCAN SPEED

18.2 START FRAME SCAN

18.3 UP TO TOP MENU

19. PARK POINT SETUP

19.1 PARK TIME

19.2 FUNCTION STATUS

19.3 SAVE THE SETUP ……………………………………………………………………..22

19.4 UP TO TOP MENU

20. LOCATION INDICATIR

20.1 PAN POSITION

20.2 TILT POSITION

21. BASIC SETUP DISPLAY

Exception Handling ……………………………………………………………………………. 23

Address code chart ……………………………………………………………………………..24

PREFACE

IRSPD 22X IR SPEED DOME

3

This manual will introduce the basic functions, installation, operation and programming of

infrared high speed dome camera. Please read this instruction manual carefully before using

the product.

The Optiview Infrared high speed dome camera is equipped with high DSP integrated

camera, built in with zoom lens and decoder controller. It represents the latest development of

the new generation high technology Infrared High Speed Camera products. It adopts digital

control and have flexible program feature. The high precision drive system can set station or

positions arbitrarily and quickly; it can continue tracing scan on all directions thereby no blind

spot is missed to monitor. The High-power IR led with super low lllumination sensor IR

integrated camera gives a high quality picture on a dark environment. The Super low

illumination function makes it automatically adapt to any lighting environment and target

distance; the camera system is highly reliable and stable with no regular maintenance needed.

It supports protocols such as: PELCO-D,PELCO-P.

Warning

Before operating this product, please read follow safe regulation. To prevent any hazard, this

device only allowed to be used in limited scope.

(1) Only qualified technical engineer to install and maintain

(2) Don‟t install the indoor camera to rain or moisture place; don‟t use it in over limit

temperature, wet or power.

(3)The spare parts only can use by manufacture recommend;

(4) After replacing and maintaining the circuit unit, please use a multimeter to test, av

oid the short circuit and open circuit;

(5)While cleaning a camera cover, please use dry and soft cloth. If heavy dirty, please

use neutral detergent and wipe lightly.

Don't use mordant or abrasive detergent

(6) Be careful to move and no press.

(7) The bracket can bear 4 times of whole camera weight;

Before operating this product, please read this instruction manual carefully.

1. Main Characteristic

Inside IR high speed dome camera parameter

Parameter

Content

Image Sensor Device

1/4" EX-View HAD CCD

Pixel

440,000

Horizontal Resolution

480TVL

Lens

f=2.5mm(WIDE) to 91mm(TELE)（F1.6 to F3.8）

Optical zoom

26X

Digital zoom

12X

Angle of view(H)

54.2°（WIDE end）to 2.2°（TELE end）

Min.working distance

320mm（WIDE end）,1500mm（TELE end）

Min illumination

1.0 lux to 0.01 lux（ICR ON）

S/N Ratio

> 50db

Electronic shutter speed

1/1 to1/10000 sec

Gain Aperture control

Auto/Manual

Back light compensation

ON/OFF

C/B

Auto/Manual control

IRSPD 22X IR SPEED DOME

4

IR CUT

Auto

Input power

6 to 12V DC

Inside Decoder parameter

Parameter

Content

IR shoot control

Low than 0.7 Lux auto on

C/B control

Synchronization

IR distance

100 meters / 328 feet

P/T circumrotation

360degree continuous,90degree

P/T speed

Pan:0 degree/S to 280 degree/S,Tilt:0 degree/S to180 degree/S

Preset

128,speed and dwell time optional

Cruise

8 route cruise,each route link with 16 preset

OSD （ On Screen

Display

English OSD

Privacy zone

2(function selectable)

Cruise memory

route（PATTERN）

1,88 sec

Scale zoom

Support(Function selectable)

Scan

Auto frame scan，auto sector scan，random scan

Especially course

1. HOME

2.move to reverse 180degree

Memery function

Auto memory & resume state

Baud rate

1200/2400/4800/9600 selectable

Communication

RS485

Protocol

PELCO-D,PELCO-P

Lightningproof

Video,power and communication super lightningproof & defend

surge

AC Adaptor

Included,Input power:AC 90V to 240V

Environment

Temperature:-40°C to + 60°C,Humidity:<90%RH

Bracket

Included

Weight

4.8kg

Certificate

CE，FCC，ISO9000

Waterproof IP

IP66

The Infrared Medium speed dome camera is the most ideal security system, it famous for

high acceleration and steady running. It can run steady from 65 º/Sec to 0.1 º/Sec speed

IRSPD 22X IR SPEED DOME

5

Product appearance

2. Installation

Before the dome is installed, the communication protocol, baud rate and dome address,

should be confirmed. Set the code switch, keeping the setting consistent with the control

system. The relative code switch site and connecting check follows manual.

Attention: When use 1 general line to control two or more speed dome cameras, connect the

two speed dome camera on RS 485 ends joint with 1200ohm resistance. The match

resistance had design on the dial switch; you only need to dial “ON”. (Check 4.5 sections)

3. Technology Specification

Camera housing, inside camera & bracket: Aluminium

Dimension: see follow picture

Weight:

Net weight Packing weight

Camera housing 3.6kg 6.4kg

Inside camera 0.8kg 1.2kg

Temperature：－40ºC ～＋65ºC

Device structure

Horizontal turn 360º continuous roll

Vertical turn +2º~-92º

Manual control Pan Tilt speed

Horizontal： 0.1º－65º/s manual operation

Vertical： 0.1º－65º/s manual operation

Preset speed：

Horizontal： 280º/s

Vertical： 180º/s

Electric Index

Input voltage：AC 90V～260V

Input Power： ≦ 25VA

Camera parameter

Signal System: PAL / NTSC

Scanning System： separate row/ one by one line scanning

CCD： 1/4"CCD

Effective Pixels： 752(H)x582(v)

IRSPD 22X IR SPEED DOME

6

Horizontal Resolution： >480TVL

Minimum Illumination

1.0Lux 1/50 sec(color)

0.1Lux 1/4 sec(color)

0.01Lux 1/4 sec(C/B)

0.05lux 1/2 sec(color)

0.1Lux 1/3 sec(color)

0.01Lux 1/3 sec(C/B)

Gain control:Auto, Manual first

Shutter speed ： Auto/ Manual 1/50-1/30000

Auto/ Manual 1/4-1/10，000

Auto/ Manual 1/2-1/30，000

S/N Ratio: ≥50dB

Video Output: 1.0V±.07V

Lens parameter

Optical Multiple: X16

X18

X22

X27

Electronic Multiple: X4

X8

X10

X12

Focus and Horizontal Angle: F1.4(f=4-64mm)；4mm angle 43º,64mm angle 3º

F1.4(f=4.1-73.8mm；4.1mm angle 43º, 73.8mm angle 2.5º

F1.6(f=4-88mm)；4mm angle 43º, 88mm angle 2º

F1.6(f=3.6-82.8mm)；3.6mm angle 45º, 82.8mm angle 2.1º

Focus: Auto, Manual First

Iris Control: Auto, Manual First

Infrared range: 328 ft.

4. Setting

Adjust the camera settings and wirings according to current environment before doing

the installation of the high speed dome camera to its final location such as knowing if a

controller keyboard or a DVR will be used to control the camera, setting the correct camera

address, baud rate,protocol etc. It is always a best practice to test the PTZ camera on a test

bench with your controller or DVR system and check all these settings and settle any

compatibility issues between PTZ camera and its main source of control (which could be a

PTZ controller or a DVR system). Consult your DVR tech support for any questions how to

configure the menu of the DVR for using or connecting a PTZ camera.

IRSPD 22X IR SPEED DOME

7

4.1 Code Switch Place

Systems setting depend on the code swith inside dome camera, as following picture:

Open the code swith cover, the relative code switch site and connecting wire are shown

below for reference.

The up code switch for dome address, the down for setting the communication

protocol, baud rate and relative RS-485 matching resistance.Below picture for indicate

the code switch ON & OFF:

IRSPD 22X IR SPEED DOME

8

4.2 Speed Dome Camera Communication Protocol Setting

Keep the dome camera communication protocol settings consistent with the control system.

Before the dome is installed the code switch of 1,2,3 OFF by Pelco-D & Pelco-P

Protocol,dome camera will auto identify the command under Pelco-D & Pelco-P Protocol,as

below picture:

4.3 Speed Dome Camera baud rate setting

Keep the dome camera baud rate setting consistent with the control system.Dome camera

support baud rate 1200bps,2400bps,4800bps & 9600bps.The 4th,5th on the code switch are

used to set baud rate.Please reference below picture(default value is 9600bps)

Note: Original Pelco keyboard the baud rate is 2400bps, Pelco-P is 4800bps.

4.4 Integrative camera video TV system Setting

IR high speed dome camera Video setting can be set to PAL or NTSC system. The 6

th

pin on

the code switch is used to set video TV system.As below picture, ON for NTSC; OFF for PAL

system (default value is PAL).

6

PALNTSC

6

4.5 RS-485 bus matching resistance setting

To ensure RS-485 bus video compatibility, the matching resistance should be set for the

device that is farthest away from the controller.There is an end matching resistance switch

board. The 8

th

bit shows ON status (see chart below) which means the BUS matching

resistance has been connected (default value is OFF)

Attention: SW1 for set communication protocol, baud rate, video TV system and

matching resistance.Protocol: (default value is Pelco-D, Pelco-P)

IRSPD 22X IR SPEED DOME

9

5. Speed Dome Camera Address Setting

Each PTZ camera must be assigned with a unique Camera address. The camera

addressing scheme is using binary system. For your convenience, you can follow

the chart to set an address to your camera.

6. Self-test process

“WELCOME TO USE……” will display on the screen as following when power on.

WELCOME TO

USE……!

Then the system enters into the self-test. During the self-test, the current setup information

will display as followed.

SPEED DOME SETUP

■PELCO--D

ADDRESS:001

■PELCO--P

ADDRESS:002

■PROTOCOL: PELCO

D/P

■BAUD RATE:9600.N.8.1

■CAMERA TYPE: PAL

■FIRMWARE

VERSION:2.10

CONFIGURE DONE

After self checking, the system's information disappeared automatically, if you want to

exam the system information at any time, you can enter OSD (ON SCREEN DISPLAY) menu,

select” "BASIC SETUP DISPLAY" item then display system configure information.

After the self-test, pan and tilt coordinates will display at the right corner of the screen during

the normal work mode.

156□32

For example, current coordinate is 156°for pan and 32°for tilt.

IRSPD 22X IR SPEED DOME

10

Camera Functionalities

7. Self-test process

7.1 Variable speed

Control Mode

Horizontal direction

Vertical Direction

Regulative

Speed

0.1 to 280º/s, depend on joy

stick‟s position

0.1to 180º/s, depend on joy

stick‟s position

Preset Speed

0.1 to 280 º/s optional

0.1to 180 º/s optional

7.2 AUTO FLIP

When the camera turn down to perpendicular position, the camera will auto-rotate 180 º. If

the joy stick continue down, the camera will continue to uplift. Once you release joy stick after

the camera flip, the joy stick will recover to normal working. This function could be used to

track when someone pass the underneath of camera, it could also adopt auto flip function.

7.3 SCAN SPEED

The scan speed can be adjusted from 1~280º/s through program the speed dome camera

menu

7.4 PRESET FUNCTIONS

Preset function is setting and call preset position

Preset function is the speed dome camera take numeral(1-128) as position parameter ssuch as

level angle, perpendicular angle and camera lens focus etc. to store in the camera. It can use

the parameters to adjust the camera’s position. Operation is easy to call preset through joy s

tick and other equipment storage. The maximum preset number is 128,from 1 to 128.

Preset setting: Adjust the camera to the just position(include pan and tilt position‟s selection,

the camera zoom, focus and iris etc.), enter the preset number, pressing PRESET key and

keep at least for 5 seconds, then the preset set success.

Call preset:: Call preset is that the camera return to beforehand position quickly and

accurately. Enter preset number, pressing PRESET key and success.

Some preset numbers have special function, no longer have preset function. For exam

ple, The number 33 and 34 are fixed command, you can‟t program these two preset.

The number 33th is flip command which used for 180 º flip. The number 34th is used

for call 0º command, the lens will run to camera‟s 0º position.

7.5 RANDOM SCANNING

Call number 97

th

then begin random scan; Direction and angles of scanning are all ra

ndom.

7.6 FRAME SCANNING

Call number 98

th

then activate frame scan, namely 360 degrees continuous loop scan;

The speed of frame scan can be set in OSD menu.

7.7 AUTO SCANNING

Call number 99

th

then start auto scan, namely sector scan.

The scan scope which contain scan left limitation, right limitation, and scan speed, cou

IRSPD 22X IR SPEED DOME

11

ld be control through software. Please make reference to the OSD menu enactment p

art to set scan limitation

7.8 Stop scanning

Call number 96

th

will stop any scanning; Press pan/tilt up-down, right-left key or the

lens control key can also stop scanning.

7.9 PATTERNS

Pattern can record the standard action and camera lens‟ movement automatically

within 90 seconds. But set and call preset function can't built in the pattern scan

routes, sector scan can set in the pattern routes.

7.10 PARK

When the dwell time is over the setting time, the camera would turn to park, and it

will display PARK. If time set is 0, or no park set, or park function not open, the

camera can't turn to park.

7.11 AUTO FOCUS

AUTO － In this mode, camera will auto focus to the only position according to the

scenery‟s far and near

MANUAL － manual adjust focus. When received any command to turn up-down or

left-right, the camera will return to auto focus condition automatically.

7.12 AUTO IRIS

AUTO－In this mode, iris will adjust automatically to the most suitable video brightness

OFF － manual control.

8. Operation

Basic operations of speed dome are described as followed list.Those operations can be

done via OSD menu.

Function

Operation method

Pan and tilt

movement

Movement of joystick

Zoom in

Press Zoom In key

Zoom out

Press Zoom Out key

Focus far

Press Focus Far key, camera will work on manual focus mode

temporarily. It will automatically turn back to auto focus mode when

you move the joystick.

Focus near

Press Focus Near key, camera will work on manual focus mode

temporarily. It will automatically turn back to auto focus mode when

you move the joystick.

Iris open

Press Iris Open key, camera will work on manual iris mode

temporarily. It will automatically turn back to auto iris mode when

you move the joystick.

Iris close

Press Iris Close key, camera will work on manual iris mode

temporarily. It will automatically turn back to auto iris mode when

you move the joystick.

IRSPD 22X IR SPEED DOME

12

Random

scan

Call of 97 preset. „RANDOM‟ label will appear at the right corner of

the screen.

Frame scan

Call of 98 preset. „FRAME‟ label will appear at the right corner of the

screen.

Auto scan

Call of 99 preset or a little of movement of joystick will stop any

automatically movement, just like auto scan, pattern, frame scan etc.

Stop scan

Call of 96 preset or any movement of joystick.

Set Presets

Enter numbers you wanted, then press „PRESET‟ key for a few

seconds until label „PRESET ***‟ appears on the screen.

Call of

Preset (Go

to preset)

Enter numbers you wanted, then press „PRESET‟ key, then label

„PRESET ***‟ appears on the screen.

Pattern start

and stop

Pattern can repeat the trace of the movement of speed dome during

a certain time. Press number „1‟, then press „PATTERN‟ key for a

few seconds until the label „TRACE‟ appear on the screen. Then

move the speed dome pan, tilt and zoom. Press „ACK‟ key to stop

and confirm the trace. During the recording, „TRACE:**S‟ indicate

the last time. The total time is 90 seconds.

Or:

Set 90 to start a pattern recording;

Set 91 to end a pattern recording;

Run pattern

Press number 1 and then „PATTERN‟ key to ran the pattern. A label

„PATTERN‟ appears on the right corner to indicate work mode. User

can also run the pattern by a call of 87 preset.

Run cruise

A call of 86 preset will run the cruise. During the cruise work mode, a

label „CRUISE‟ appears at the right corner of the screen.

Open and

close OSD

menu

Set or call of 95 preset will open or close the OSD menu at any time.

It is a flip-flop soft switch.

Flip

Call of 33 preset will reverse the camera.

Home

Call of 34 preset will move the camera to pan zero.

Set of the

left limit of

auto scan

Set of 92 preset will set the left limit of auto scan. A label „LEFT

LIMIT‟ will appear at the bottom of the screen.

Set of the

right limit of

auto scan

Set of 93 preset will set the left limit of auto scan. A label „RIGHT

LIMIT‟ will appear at the bottom of the screen.

Set park

station

Set of 87 preset will set the park location. A label „SET PARK‟ will

appear at the bottom of the screen. When there are no movement

control commands from keyboard or DVR for a few times, camera

will move to the parking station, a label „PARK‟ will appear at the

right corner of the screen. The time can be set via the OSD menu.

IRSPD 22X IR SPEED DOME

13

Park enable

Set of 88 preset will enable the parking function. A label „PARK

ENABLE‟ will appear at the bottom of the screen.

Note: Don‟t enable parking function when dome is in any scan work

mode, just like frame scan, auto scan etc. Otherwise, this will result

in a false movement.

Park disable

Set of 89 preset will disable the parking function. A label „PARK

DISABLE‟ will appear at the bottom of the screen.

Actually, a lot of controllers or DVR have no function of sending special control comm

and, so many functions complete through set or call different preset position. And the

special used presets have no normal function. Follow form show special functions thro

ugh preset setting.

Preset Number

Complete Function

87

Set PARK position

88

Open PARK function

89

Stop PARK function

90

PATTERN START

91

PATTERN END

92

Set left limit of auto

scanning

93

Set right limit of auto

scanning

95

Enter/Exit OSD menu

Follow form complete special functions through call preset.

Transfer preset

number

Complete function

33

Horizontal reversal 180º

(Flip)

34

Return to 0º(Home)

86

Start default cruising

group

87

Start PATTERN

95

flip/stop OSD menu

96

Stop Scan

97

Random Scan

98

Frame Scan

99

Auto Scan

9. OSD Operation

OSD menu provides a user friendly interface. User can simply operate the dome and

obtain any information from the dome, no need of memory of so many commands.

The method of opening the menu: OSD menu will appear on the screen for the first time

of set or call of 95 preset at any time. Menu will be closed for the second time of set or call 95

preset.

After entering into the OSD menu, Focus Far、Focus Near、Iris Open and Iris Close keys

will be used to operate the menu item. When exiting the menu and back to the normal work

mode, the function of the four keys will turn back to their original function.

As long as OSD menu is turned on, the function of the four keys is described as

following.

IRSPD 22X IR SPEED DOME

14

Focus Far: Cursor move up

Focus Near: Cursor move down

Iris Open: The values of the item decrease 1, or select another option.

Iris Close: The values of the item increases 1, or select another option, or confirm the

function selected, just like a ENTER key of a PC keyboard.

10. OSD Menu

Enter or exit OSD menu by press 95+PRESE key.

According to PELCO controller to program 95+PRESET, different PELCO control with

different program command.

If using any one of the following Pelco Devices:

CM6700,CM6800

(1) Press key "CAM" after input Camera's number

(2) Input number 95 and press key "PRESET" and keep 2 seconds

(3) In EDIT menu, move cursor to "SET" then press key "ACK", camera main menu will display.

KBD200A/KBD300A/KBD300V(only for direct control)

(1) Press number 95

(2) Press key "PRESET" about 5 seconds until main menu display

CM8500

(1) Press key "CAM" and input Camera's number

(2) Move cursor to "PRESET" on OSD, press button on Joy stick until set tip display

(3) Input 95 and press key "PRESET", the edit words appear, choose ENTER, the main menu display.

CM9500

(1) Press key "CAM" and input camera's number

(2) Brighten “Setup” on main menu, press key SELECT

(3) Brighten “Cam” on Setup menu, press key SELECT

(4) Brighten “Preset” on Cam menu, press key SELECT

(5) Input 95 and press key F1, the main menu display

CM9740/9760

(1)Press key ESCAPE open main menu, select DEF, the detailed menu display

(2)If you are the first time enter this mode, please enter your four number pass-word

(3)Input 95 and select PRESET, the main menu display on Monitor

(4)Select icons QUIT and return default setting menu.

KBD4000/KBD4002/KBD4000V

(1) Press key SPOT MONITOR

(2) Input 95, press key PRESET about 5 seconds until the main menu display on monitor.

PelcoNet

(1) Select SET BOX

(2) Input preset number 95, the main menu will display.

IRSPD 22X IR SPEED DOME

15

11. Main Menu

The screen will be as following after entering into OSD menu.

■CAMERA SETUP

PRIVACY ZONE

PRESET POINT

CRUISE SETUP

PATTERN SETUP

AUTO SCAN SETUP

FRAME SCAN SETUP

PARK POINT SETUP

LOCATION

INDICATOR

BASIC SETUP

DISPLAY

„■‟ is a cursor. It indicates which item is being operated currently. When switch items by

using of the Focus Far and Focus Near keys, cursor „■‟ will move up or down.

Press Iris Close key for any item of the main menu, you will enter into the submenu.

User can operate the dome according to the tips from the menu.

12. Camera SETUP

Move cursor to"CAMERA SETUP" and press Iris Close key, you will enter into the

submenu as follow:

■ICON DISPLAY:OFF

ZOOM SPEED:5

DIGITAL ZOOM:ON

FOCUS MODE:AUTO

PICTURE DISPLAY:ON

PICTURE NEGTIVE:OFF

BLACK AND:WHITE:OFF

PICTURE REVERSE:OFF

PICTURE FREEZE:OFF

BACK LIGHT:ON

WHITE BALANCE:AUTO

SAVE AND UP TO TOP MENU

Each item in this menu is about camera function setting. Select function through

Focus Far and Focus Near key, and then switch by Iris Close key.

Remarks: Part function different according to different brand and model of the

camera.

IRSPD 22X IR SPEED DOME

16

Details for all functions as follow,

12.1 ICON DISPLAY

ON: display as iconic format for the state of camera ZOOM, IRIS, FOCUS (default setting)

OFF: no picture

12.2 ZOOM SPEED

8 grade zoom speed in total: 0-7 grade, 0 grades is slowest speed, 7 grades is the fastest,

(default setting: 5 grades).

12.3 DIGITAL ZOOM

AUTO: If auto focus, press FOCUS FAR and FOCUS NEAR will set the focus, if you

operate pan tilt, camera will return to best focus after pitching and zoom.

OFF: If focus set OFF, press FOCUS FAR and FOCUS NEAR key for focus.

12.4 FOCUS MODE

AUTO: auto focus mode (default setting)

Manual: manual focus mode

12.5 PICTURE DISPLAY

ON: display natural video picture (default setting)

OFF: close video output

12.6 PICTURE NEGTIVE

ON: video picture change to negative

OFF: natural display picture (default setting)

12.7 BLACK AND WHITE

ON: B/W

OFF: COLOR (default setting)

12.8 PICTURE REVERSE

ON: video picture right-left (up-down) reverse

OFF: natural video picture (default setting)

12.9 PICTURE FREEZE

ON: picture freeze

OFF: natural picture (default setting)

12.10 BACK LIGHT

ON: open

OFF: close (default setting)

12.11 WHITE BALANCE

AUTO: auto white balance mode

IRSPD 22X IR SPEED DOME

17

INDOOR: indoor white balance mode

OUTDOOR: outdoor white balance mode

ATW: auto track white balance mode

12.12 SAVE AND UP TO TOP MENU

Save all setting and return to top menu.Memorize all setting when power off.

13. PRIVACY ZONE

Not support.

14. PRESET POINT

Preset positions setting and call

Preset position setting: memory current pan tilt‟s horizontal and vertical direction and

camera state.

Call preset: pan tilt and camera run to beforehand setting and memory state.

Press Iris Close key on PRESET POINT menu, it will display:

■PRESET

NUMBER:003(USED)

PRESET SPEED:64

(MAX64)

DWELL TIME:00

(MAX60)

CHARACTER:OFF

SAVE PRESET

UP TO TOP MENU

14.1 PRESET NUMBER

Select preset number, camera will move to preset position if selected and display

"USED" at right. If not set, it will display NOT.

14.2 PRESET SPEED

Setting horizontal and vertical speed for preset position, 1-64 grade, 1 is the slowest and

64 is the fastest (default setting 64)

14.3 DWELL TIME

Dwell time within 00-60 seconds (default setting 0).

14.4 CHARACTER

ON: Character display on screen

OFF: no Character display

14.5 SAVE PRESET

Setting or revise preset

Adjust pan tilt and camera to the right position and press Iris Close key, and then

begin to memory this preset. Display"... ...OK" and succeed.

14.6 UP TO TOP MENU

IRSPD 22X IR SPEED DOME

18

15. CRUISE SETUP

Drop and enter submenu as following:

■CRUISE NUMBER:1

PRESET INCLUDED:

(01)001 (02)002 (03)005

(04) (05)007 (06)

(07)008 (08) (09)

(10) (11) (12)

(13) (14) (15)

(16)

SAVING

TEST THE CRUISE

UP TO TOP MENU

Each Cruising group tracks 16 presets, for example above format indicate: start

cruise group 1 will cruise 1, 2,5,7,8 preset times after time.

15.1 CRUISE NUMBER

Setting Cruise number (default setting 1)

15.2 PRESET INCLUDED

Setting and display cruise preset, switch by Focus Far and Focus Near key within 16

preset point, set preset number by Iris Open and Iris Close key in range 1-128.

15.3 SAVING

Display “……OK!”And succeed。

15.4 TEST THE CRUISE

Press“95 + PRESET”to close the OSD

15.5 UP TO TOP MENU

16. PATTERN SETUP

PATTERB SETUP menu is used for set and run pattern scan. Enter and display:

■SET PATTERN

START&STOP

RUN THE PATTERN

UP TO TOP MENU

IRSPD 22X IR SPEED DOME

19

16.1 SET PATTERN START&STOP

Press Iris Close key, camera begin to memorize run track, included horizontal, vertical

tracking and camera zoom, call preset. Press Iris Close key again, it will stop memory.

Pattern time is 90 seconds and “TRACE: XX”show the time left for tracking.

16.2 RUN THE PATTERN

Press"95+PRESET" can close OSD MENU. The screen will display "PATTERN" when run

PATTERN.

16.3 UP TO TOP MENU

17. AUTO SCAN SETUP

This item for setting the started and end point and speed of Auto scan namely detector

scan. Press Iris Close key and display as follow:

■LEFT LIMIT TIME:01

SAVING LEFT LIMIT

RIGHT LIMIT TIME:01

SAVING RIGHT LIMIT

AUTO SCAN SPEED:64

TEST THE AUTO SCAN

UP TO TOP MENU

Auto scan: Pan Tilt scanning between LEFT LIMIT and RIGHT LIMIT. The horizontal and

vertical position for LIMIT is alterable.

17.1 LEFT LIMIT TIME

Set the dwell time on LEFT LIMIT position, time bound is 0-60 seconds.

17.2 SAVING LEFT LIMIT

Run the pan tilt to aim point, press "Iris Close" key and this point is memorized as the

LEFT LIMIT position and memorize dwell time.

17.3 RIGHT LIMIT TIME

Set the dwell time on Right Limit position, time bound is 0-60 seconds.

17.4 SAVING RIGHT LIMIT

Run the pan tilt to aim point, press "Iris Close" key and this point is memorized as the

RIGHT LIMIT position and memorize dwell time.

17.5 AUTO SCAN SPEED

Speed scope: 0-64

Page is loading ...

Optiview IRSPD 22X User manual

Optiview IRSPD 22X User manual

Related papers

Other documents