POWLI234 EN
Copyright © 2018 VARO P a g e | 1 www.varo.com
PORTABLE LED FLOODLIGHT 20W
POWLI234
1 DOMAIN OF USAGE
Outdoor or indoor use such as jobsite, garden, studio and workshop.
WARNING! Read this manual and general safety instructions
carefully before using the appliance, for your own safety. Your power
tool should only be passed on together with these instructions.
2 SYMBOLS
In this manual and/or on the machine the following symbols are used:
3 WARNING
▪ Never attempt to change wire connection way as this has been fixed professionally.
▪ The lighting fixture shall be fixed on stand vertically that the longitudinal axis does not
slant than ±4°from the ground plate.
▪ Disconnect the plug from the network when the front glass is open, and follow the
instructions to the next step.
▪ Replace before using the shielding glass if it is damaged.
▪ If the external flexible cable or cord of this luminary is damaged, it shall be
exclusively replaced by the manufacturer or his service agent or a similar qualified
person in order to avoid a hazard.
4 ASSEMBLING THE FLOODLIGHT ONTO THE STAND (FIG.
1)
▪ First unscrew the black wing-nut (B).
▪ Put the lamp on the H-shaped base (A) in such a way so that the two slots align. Put
the wing screw through both slots and tighten the nut.
▪ By loosening the wing screws (C) on both sides of the lamp you can put the lamp into
the desired angle.
▪ Lock the lamp in place by tightening the wing screws.
5 USING THE FLOODLIGHT
▪ Simply plug in the cable of the floodlight to the socket.
