Zenith A20A22D Operating instructions

Type
Operating instructions
machine numbers I A20A22D
r
ith_
L
operating gu'ide / warranty
U YOUIIm m 1
The mode[andserialnumberof yournewTVare located
onthe backof the TVcabinet Foryour future convenience,
wesuggestthat you recordthese numbershere:
MODEL NO.
SERIALNO.
WARNING
WARNING:
TO REDUCETHE RISKOF ELECTRICSHOCK DO NOT REMOVECOVER(ORBACK).NO USERSERVICEABLEPARTSINSIDE.
REFERTO QUALIFIEDSERVICEPERSONNEL.
The Lightningflashwith arrowheadsymbol within an equiLateraLbiangle, is intended to alert the userto the presence
of uninsulated"dangerousvoltage"within the product'senclosurethat maybe ofsufficientmagnitude to constitutea
risk ofelecbic shockto persons.
The exclamationpointwithin an equiLateraLtriangleis intendedto alertthe userto the presenceof importantoperating
and maintenance(servicing)instructionsin the [iteratureaccompanyingthe appliance.
WARNING:
TOPREVENTFIREORSHOCKHAZARDS,DONOTEXPOSETHISPRODUCTTORAINORMOISTURE.
POWER CORD POLARIZATION:
CAUTION:ToPreventElectricShock,Match wide bladeof pLugto wide slot, fuLLyinsert.
ATTENTION:Pour_viter les chocs_lectriques,introduire la lame la pLuslargede la fichedansla borne
correspondantede la priseet pousserjusqu'au fond.
NOTETO CABLE/IV INSTALLER."
This reminderis providedto call.the cableW systeminstaLLersattentionto ArticLe820-40 of the NationalELectricCode
(U.S.A.). The codeprovidesguidelinesfor propergroundingand,in particular,specifiesthat the cable groundshaLLbe
connectedto the groundingsystemof the buitding,ascloseto the pointofthe cable entry aspractical
REGULATORYINFORMATION:
Thisequipmenthasbeentested and foundto complywith the Limitsfor a ClassBdigitaldevice,pursuant to Part 15
of the FCCRuLes.TheseLimitsaredesignedto providereasonableprotectionagainstharmfulinterferencewhenthe
equipment is operatedin a residential instalJation. Thisequipment generates,usesand canradiate radiofrequency
energyand,if notinstaLLedand usedin accordancewith the instruction manuaL,may causeharmfulinterference to radio
communications.However,thereis noguaranteethat interference wiLLnot occurin a particularinstaUation. If tMs
equipment doescauseharmfulinterference to radioortelevision reception,whichcanbe determinedby turning
the equipment off andon, the useris encouragedto try to correctthe interference byone or moreof the foLLowing
measures: Reorientor relocatethe receiving antenna.
Increasethe separationbetweenthe equipment and receiver.
Connectthe equipment into an outlet ona circuitdifferentfrom that to whichthe
receiverisconnected.
ConsuLtthe dealeror anexperiencedradioiTV technicianfor help.
CAUTION:
Donot attempt to modiEj this productin anywaywithout written authorizationfromZenithELectronicsCorporation.
Unauthorizedmodification couLdvoidthe user'sauthorityto operatethis product.
,NS,A'LA*,ONI IPAGE3
_PORTANT!!
Usethis pageto decidewhereyou needto begin your set up. First,find the Une
belowthat best describeswhat you want to do, then goto that pagenumber.
If you are usingan antennaand no other equipment,go to .................. page4
_ I p p
\ \ \11 / /
t
_u:hpa_WI
_W_ /
pmpe,"_- I
upof_p_ur/
Lu r_l!_j
If you havecableand no other equipment, go to ......................... page5
Cahte1V
_U Jade
If you are usingan antennaand have a VCR,go to ....................... page6
t p
If you have cable and aVCR,goto .................................. page7
Cable1Y
_ja_
FeeUngbrave?lyyoujust wantsomegeneralhook-upinformationabout
mstmnizingyourownset-up,thenskiptopage8.
206-3371-0
P,GE,I ..S,,L',,.O.! S,,.O,.O
f
Connect
off-air
anl_nnayour
Entertainment
Machine
Locatethe Antenna/Cablejack on
the backof your Entertainment
Machine.
Connectthe cablethat runsfrom
the watt directlyto this jack,
accordingto the diagramto the
right.
Removethe backof the remote
and put in two AAAbatteries.
Plugin your W. Donot plug it
into a switchedoutlet. Your
EntertainmentMachineis
designedto operateon household
current, 120-voLt60 HertzAC. Do
notattempt to operateit on DC
CurrenL
Goto page8 to Auto Program
your EntertainmentMachine.
_ IIyou haw a FSohmRF_M_
_ _mem_, whlasma_nglU:
mlJ_sona_kd_,_t_ht-
_s, m_deom_ loosw_
_ A3OOto?5_m _lap_
isnotindud_ wftl_yourT.en_
ErCarminmwlt14edn'n_
Flat wire antenna to TV
T
p /
Antenna
Rat wire
(300 ohm)
3o0/75ohm
Adapter
Round wire antenna to TV
%• •• %_
s, (
Antenna
RFcoaxialwire
75 OHH RFCABLE
300 TO75 OHM
ADAPTER
The wirethat comesfrom an off-air antennaor cableserviceprovider.Eachend looksLikea hexshapednut with a wire
suckingthrough the middle,and it screwsonto the threadedjack on the backof yourIV.
A stoat[devicethat connectsa two-wire 300 ohmantennato a 75 ohmRFjack. Theyare usuallyabout an inch tongwith two
screwson one end and a roundopening with a wire stickingout on the other end.
206-3371-O
*.STA'LA,,O.I STANDARDIPAOE
p,
Locatethe Antenna/CabLejack on
the backof your Entertainment
Machine.
Connectthe cabLethat runsfrom
the waLLdirectLyto this jack.
Removethe backof the remote
and put in two AAAbatteries.
PLugin your TV. Do not pLugit
into a switchedoutLet.Your
EntertainmentMachineis
designedto operateon household
current, 120-voLt60 HertzAC.Do
not attempt to operateit on DC
Current.
Goto page8 to Auto Program
your EntertainmentMachine.
I!jmu're edngambie box,
.vourTVon dNmnei3 or 4 o_i use
your coblmb_ _ change_n-
nets.
eemember,whensa_ne RF
ceb_sontojo_ _ t_-
ens,ram'cou_/oosens
/l.you'm usfnga _a/_box,
_j_ on(v_ndU_ dan-
he/yourmb/eserifison(mua/-
channe/3or4)._nt wony,
that'sa//_ neff!
Cable to TV
CableTV
wattjack
I
RFcoaxial wire (75ohm)
CabLewith CabLeBoxto TV
CableTV
walljack
Cable box
Out _ output 1-01
switch 3 4
1.wire (75ohm)
Connect
toyour
Entertainment
Macldne
J
206-3371-0
PAGE6I..STALLATIO.I S,A.OARO
Connectyour
off-air
antennaand
VCRtoyour
Entertainment
Hachirm.
\
Locatethe Antenna/CabLejack on
the back of your Entertainment
Machine.
Connect the cablethat runsfrom
the waLLdirectly to this jack,
accordingto the diagramto the
right.
Removethe backof the remote
and put in two AAA batteries.
PLugin your1!/. Donot pLugit
into a switchedoutlet. Your
EntertainmentMachineis designed
to operateon householdcurrent,
lEO-voLt60 Hertz AC.Donot
attempt to operateit on DC
Goto page8 to Auto Programyour
EntertainmentMachine.
_mm_, m xn_
RF_o_ on_oj_ ded_
No,4/Vcable_ami_ wi_
your_ Entwl_nment
Machine.
wehou¢4/v _e_s, mo_ v_ w_U
no¢p_ vkteoaeaee_ tn stereo
sound.
i Flatwire
_' (300 ohm)
FLatwire Antenna to TV with VCR
300/75 ohm
Adapter
•,, Roundwire Antenna to TV with VCR
_UItzoni
(TSohm)
206-3371-0
,.STA 'AT,O.I S,A.OA.O!PAGE7
Locatethe Antenna/Cablejack on
the backof your Entertainment
Machine.
Connectthe cabtethat runsfrom
the wattdirecttyto this jack,
accordingto the diagramto the
right.
Removethe backof the remote
and put in two AAAbatteries.
Ptugin your TV. Donot plugit
into a switchedout[eL Your
EntertainmentMachine is
designedto operateon househotd
current, 120-vott 60 Hertz AC.Do
not attempt to operateit on DC
Current.
Goto page8 to Auto Program
your EntertainmentMachine.
Cable to TV with VCR
CableTV
waU jack
_re (75ohm)
CabLewith Cabte
Boxto TV with
VCR
Connect your
vozand l
cauetoyour I
Entem_nment I
VCRbacl_,_Vpanet"', /
In output_ l
) switch 3 4 l
J
tun_ _ d_nnd _r_ and use
@
Remember,whenscr_ JnI_
ml_es on_ jod_ dodm,ise tight.
era, and ¢ou_ loosens.
No4/V ml_esereinduded
withyour Enter_nment MadOne_
Wehout4Al mbles,mostYah
mT!not pley videocmset_ in
stereosound.
J
PAGE8I ,.STALL^,,O.I QU,< ¸START
f
UseAuto
wJtomU_Uy
find an4
the stations
With the remotecontrol in hand,
pressthe POWERkey to turn on
your EntertainmentMachine.
Pressthe HENUkey so the Setup
menuappears.
Usingthe UP/DOWNarrows on
the remotecontroL,selectAuto
Programon your screen.
Pressa RIGHTor LEFTarrowto
reachthe Auto Programscreen.
Using the UP/DOWNarrows,
chooseeither CabLeTV or Off-Air
Antennaon your screen.
Pressa RIGHTor LEFTarrowto
begin Auto Program.
PressENTERor ClUITto return to
TVHewing.
AUTOPROGRAMAuto Programis howyour EntertainmentI_achinefindsallthe channels availablein your areaand storesthemin memo_.
206-3371-0
op,.,,,o.I ,UTTONFUNCT'ONSIP,GE,
PRG(PROG_M)
Programsyourremoteto
operateother products.
See page23.
FLASHBK
(FLASHBACK)
Returnto the
last channel viewed.
CHANNEL
(UP/DOWN)
Flipthrough
availablechannels.
ENTER
Showsthe Channel/Time
display.Pressafter channel
numbersfor instant selection.
LEFT/RIGHT ARROWS
The Left/Right arrows
adjustoptions.
MENU
Displayson-screen
menusfor TV mode.
Displaysthe SleepTimer
Menu.See"Timer Setup"
on page 18 for
moreinformation.
Gray_ irmVem__at they
notJ_ncLi_ on
illOjf
your
mo_oITK.
POWER
TurnsTVOnor Off..
LED INDICATOR LIGHT
(_) ((_ _ Lightswhen keysare pressed.
CABLE
Switch
sources
device.
ENTER
CASLE/VCR/AU_
Switchbetweenavailable input
sources.AUXis for any optional
MUTE
TurnssoundOffand On
while the pictureremains.
VOLUME LEFT/RIGHT
Adjuststhe soundlevels on
your EntertainmentMachine.
HUMBER KEY PAD
Selectschannelsdirectlyand
entersnumericvaluesfor
someoptions,
UP/DOWN ARROWS
The Up/Downarrowsselectoptions.
llUX'l'
Removeon-screendisplayfrom
view. If no displayis on, switches
front speakersurroundsound
Onand Off fromsomeTVs.
TV/VCR-SOURCE
SwitchesbetweenwatchingTV
throughyour antenna/cable,or
through your VCR.
remote control,part number
MBR3446
A quickUst
of all the
buttonson
yourremote
andwhat
theydo.
206-3371-0
J
_,oEloIoP_,,,o.IBo,,o.Fu.c,,o.s
u_ng_e
pane[onthe
frontofyour
Entertainment
Maddne.
Here'san exampleof howto usethe front panet
to workwith menus:
Access the Setup Menu by press-
ing MENU on the front pane[.
Using the CHANNEL Up/Down
keys, select Language on your
screen.
Pressthe VOLUMERight/Left
arrowsto adjustthe languageyou
want your on-screenmenusto
appearin.
Repeatthe abovestepsforthe
other optionsin the Setupand
Videomenus.
Whenfinished, wait ten seconds
and the menuswit[ disappear.
I_hont a rmo_, yon r_ _t
bed_e m used theoptionstn
yourmenus,sudeasthoseth_
eequhetheNUMBERkeypadon
theremoee.
//
//
//
//
//
//
206-3371-0
I IPAOE11
OnsomemodelsA/V input is designatedas a channelthat is one below
the lowest/one abovethe highest. You'[[haveto usethe Channel
Up/Down buttons to accessit. The Time/Channel displaywill read "Video"
in place of a channelnumber.
Cable/AntennaInput: This setting allowsyou to changecableor
antennachannelsandto view videocassetteson channel3 (or 4) in mono
sound.
VideoInput: Thissetting allowsstereoplayback of videocassettes.The
televisioncannotchangechannelsin the Videomode,but the VCRcan.
[_ Toviewt_ mnent inl_: Sour_, pms ENTERonj_r mmo_ TI_
an_/VJnp_ IItf_readsa _ _m_, _
sourczisyour_ orAntrum.
Illllllll Ill]llllilll i11 In[ll
CHANNELUP/DOWNarrows:Usethesearrowsto changethe channels.
Auto Programwit[have foundall channelsavailableto you.
NUMBERKeypad:Toskipto any channel,enter the numberofthe
channel usingthe NUMBERkey pad,then pressENTER.
FLASHBACK:Toinstantly return to the last channelviewed,
pressFLASHBACK.
Volume Right/Left: To adjust the volume level, use the volume Right/Left
arrows. To silence your IV instantly, press MUTE. To get the sound back,
press MUTE again.
_ some mono mod_ (A19AOZDandAZ._IOZD)do.or
hm_ _ fr_, j_ _ stiil _ o _ 3ustt_m
_opage 6 f_ ilom howto hook_ your an_ and iqTt.
CH 12
10:55
STEREO
Channelor Video
(Indicates Source)
Time
AudioMode
Intm4udng
you to the
basicsof your
Entes'_nment
14achine.
/
i
206-3371-0
J
PAGE1210, RA,.O.I ,V,U"OA"E"TALS
f
pon
comldnin9
your
Entemdnment
Machine
with mere
equipment.
Therearea numberofwaysyoucanchooseto integrateyourEntertainmentHachine_ therestofyourequip-
merit.Channelscanbechangedusingthetelevision,theVt:R,orthecablebox,withadvantagestoeach.
USING THE TELEVISION AS THE TUNER preservesaU your channel Labels(not avaiLabLeon some models). It aLso
reducesthe number of keys on the remote controLyou need to worry about. (One device, one remote to Learn.)
USING THE VCR AS THE TUNER hasthe advantageof simplifyingthe recordingprocess.If the VCRis tuned to
channeLseven,then the VCRwiLLrecordchanneLseven.
USING THE CABLE BOX (if you haveone) to changethe stationssometimeshasan advantage,too, especiaLLyif
your cabLeproviderrequiresyou to usetheir cabLeboxto descrambLetheir stations.
Basedon the advantagesListedabove, decidewhat
deviceyou want to useasthe tuner.
Connectthe antennaor cabLesourceto the input
of your tuner. (If you choseyour teLevision as the
tuner, then you'redone. Gowatchyour
Entertainmentt4achine.)
Connectthe output of your tuner to the input of the
next device.
If you usedA/V cablesfor step 3, setthe "next
device"to Videoinput. If you usedan RFcoaxial
cabLein step 3, then tune the "next device"to
matchthe output channelof yourtuner (usuaLLy
channel3 or 4).
Repeatsteps3 and 4 untiLyou reachyour
EntertainmentMachine.Thenenjoy!
TUNER The television, VCR, or cable box that you choose to change channels with.
A/V CABLES Audio/Video cables. Three cables bunched together--right audio (red), [eft audio (white), and video (yeLLow).
A/V DEVICE Any device that produces video or sound (VCR, DVD, cable box, or television).
206-3371-0
O,,,T,ONI .ENUSIP,OE1,
Function What it is for
Auto Program
Ch. Add/Del
[_ic)[_, I_l_l
Clock Set
Timer Setup
Captions/Text
AudioMode
Language
AutomaticaLLyfinds and storesactive
channeLsto flip through using Channel
Up/Down.
ManuaLLypickand choose whichactive
channeLswiLLappear whenflipping through
usingChannel Up/Down.
Setsthe currenttime on your Entertainment
Machine.
Opens menu for the foLLowingfunctions:
Turns the Sleep Timer on or off.
Selects an automatic On Time for your
Entertainment Machine.
Selects an automatic Off Time for
shut-down.
On/Off timer controls automatic power
on and power off.
Must be set to On for above functions
to work.
Displaysdosed captions or text when
avaiLable.Optionsare Off, Caption1,
Caption 2, Caption3, Caption4, Text 1,
Text2, Text 3, and Text4.
SwitchesyoursoundbetweenStereo
(separatesoundon Leftand dght speakers)
and Mono (samesoundon both speakers).
SeLectsLanguagefor on-screenmenus.Your
optionsare EngLish,Spanish,or French.
znv_o mo_,oeivao_ s_, TiN S_m,
_ _ Zmeqe wmm_m_Tov_w
d men_ sw_ eoCeb_a_no input.
Go to page
14
15
15
17
18
lg
Setup Menu
AutoProgram
Oh.Add/Det
ClockSet
Timer Setup
Captions/Text
Language
Thisis an exampleof
what on-screenmenus
looklike.
z_,aipuons
of ttm menu
optionsfound
in the Seluup
Menu.
J
206-3371-0
P,oE lOPE"AT'O"I " NU'
Pressthe MENUkeyonthe remote
so the Setupmenuappears.
Selectthe Ch. Add/Delete menu
using the UP/DOWNarrows.
Using either the NUMBER key pad
or the CHANNEL UP/DOWN arrows
on the remote, select a channe[.
(If adding a deleted channeL, you
wit[ need to use the number pad.)
_K
Usingthe RIGHT/LEFTarrows,
pick whetherthat channe[is
Addedor Deleted.
Tocontinue,selectanother
channeland repeat step4. If you
are finished, pressENTERor QUIT
to retum to TV viewing.
Zfyou delete a channel,it isn't
gonefor good.3ustselectit
usingthe NUMBERkeypad on
the remote, or add it tater.
ADD ThisfunctionLetsyouaddnewchannelsto thetistthatyou1[scrottthroughwhenusingyourremote.
DELETE TMsfunction let_youremovechannelsthatyoudon'twatchfromthefistyou'llscrollthrough.
J
206-3371-A
O,_RA.ONI M_NOSIPAOEI_
Pressthe MENUkey onthe remote
controlsothe setupmenuappears.
Usingthe UP/DOWNarrowson
the remotecontro{,selectC|ock
Set onyour screen.
Pressa RIGHTor LEFTarrowto
adjustthe time.
PresstheTIMER buttontosetect
AM orPM.
PressENTERor QUITto return to
TVviewing.
You_ usethe #UNBERpod
or PN fssb_ _ w_h b_e
0
Setthe dock
on your
Entertainment
Madflne.
J
J
PAGE
f
16
AutomaUcalb
turn your
Zenfth
Entertainment
Haddne on
or off.
I I
Note:
Press the MENU key on the remote
contro| repeated|y so the Special
Features Menu appears.
Using the UP/DOWN arrows on the
remote contro|, setect Timer Setup
on your screen.
Pressa RIGHT/LEFTarrow.TheTimer
Menuscreenwit[appear.
Sleep Timer: Use the RIGHT/LEFT
arrows to adjust the [ength of time
unti| the TV shuts down (select a
countdown from ten minutes to
four hours).
At this point, continueto step
five to setthe OnTime, or press
ENTERor QUITto return to
TVviewing.
OnTime:Usingthe UP/DOWN
arrowsonthe remote control,select
OnTimeonyour screen.
Pressa RIGHTor LEFTarrowor use
the NUMBERkpy _aLito enter the
timeyour TV will automatical|y
turn on.
Pressthe TIMERbutton to select
AMor PM.
Pressthe UP/DOWNarrowkeysto
setectOn/Off Timer.
Pressthe LEFTor RXGHTarrowto
turn on the On/Off Timer.
PressENTERor QUIT to returnto
TVviewingor continueprogram-
ming by repeatingthe abovesteps
forOff Time.
TheOn/O!7Un_"wiUnotwork
untiltheCEx*onyourtelevis_
hasbeenset.
@ o
206-3371-0
OP R,T.O.I , .USIP,GE1,
Captionfrext isa feature whichallowsyour
EntertainmentMachine to receivevariousdosed cap-
tion and text optionsprovidedby your broadcaster.
Avai|abiE_ and functionatityof Caotion!Textfeatureis
determinedonly by your broadcasterand may notbe
avaitabtein your area.
Press the MENU key on the remote
contro[ so the Setup
menu appears.
m.
F
Usingthe UP/DOWNarrowson the
remotecontrol selectCaption/Text
on your screen.
Pressa RIGHT/LEFT arrow to
choose any of the foO_wing
options: Caption 1, Caption 2,
Caption 3, Caption 4, Text 1,
Text 2, Text 3 or Text 4.
PressENTERor QUITto returnto
TV viewing.
a/_mf_ t_ec_t_ I_bn.
Notd progmmndnghasdosedmp.
_ng or_ m,oibb_e.
©
Turnon dosed
captioningor
text that
aPl)eamon
yol,lr._l'eL_l.
J
J
206-3371-0
P,oE o, ,,T.ONI .E.us
f
Choose
between
stereosound
andmono
sound.
Pressthe MENUkey onthe
remote contro| sothe Setup
menu appears.
Usingthe UP/DOWNarrowson
the remotecontro[,selectAudio
Modeon your screen.
Pressa RIGHT/LEFTarrowto
select either of the foUowing
options:Stereoor Mono.
PressENTERor QUITto returnto
TV viewing.
Not oHprogrammingisbroodcost
in stereosound.
f
0
(_D _ (_
STEREOSOUND Stereo(stereophonic)soundreferstoaudiothat'sdividedintorightandteft sides.
MONOSOUND Hono(monaurat)soundis onechannetofsound.Onmorethanonespeaker,allthe speakerspraythesameaudio.
206-3371-A
OP_R,T,ONI ._NUSIpAOE19
Press the MENU key on the
remote control so the Setup menu
appears.
Using the UP/DOWN arrows on
the remote control, select
Language on your screen.
Pressa RIGHT/LEFTarrowto
chooseany of the foLlowing
options:EngEsh,Spanish,
or French.
PressENTERor QUIT to return to
regular TV viewing.
0
J
Choesethe
languageyou
want all the
menusto
appearin.
J
J
PAGE 20 I
c_
OPERATION
!IB
Pressthe MENUkey twice and the Video
menuwitt appear.Youroptionsare:
Contrast: Adjuststhe tevetof
differencebetween white and blackin
the TV picture.The more contrast,the
brighter the pictureappears.
Brightness: Increases or decreases
amount of white in the 1V picture.
Color'.Adjustsrevers of artcotorsin the
TV picture.
Tint: Balancesbetweenamountsof red
and greenin the TVpicture.
Sharpness:Raisesor towersthe
definition of the TV picture.The tower
the revel, the softerthe imageswitl
appear.
Picture Preference: Choose either
Custom, Preset, DayUght or Nighttime.
Custom aLtowsyou to set the picture
the way you want. Preset moves aU the
above options back to their origina[,
factory-set revers. Daytight and
Nighttime optimizes your Entertainemnt
Machine to a day time or nighttime env-
iornmenL
Usingthe UP/DOWNarrowson theoremote
controt,setectContraston your screen.
Usingthe RIGHT/LEFTarrows,adjustthe
contrastrevelto your preference.
PressENTER,QUITor MENUone moretime
to returnto TVviewing, or
repeat fromstep two to set the other
menu options.
Usingthe UP/DOWNarrows,setectPicture
Preferenceonyour screen.
Usingthe RIGHT/LEFTarrows,choose
either the originatsettings
with Preset,or useyourown settingswith
Custom.
/Jese_ 1_¢1_€_tor_me Irma Pres_ w
enhanceyourviewingp_asum,dayorniqht/
/¢t thep_:Wre/ao/dngt_rribb?3ustd_s¢
thePresetopt'on_nPicture_ toqui_y met
_e bve/s.
0
206-3371-0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Zenith A20A22D Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI