Panasonic CT 24SX12 User manual

®

Color Television

Operating Instructions

CT-24SX12 CT-27SX12

TQB2AA0417 12112

PRINTEDINUSA

Télé-couleur

Manuel d’utilisation

TQB2AA0417 12112

IMPRIMÉ AUX ÉTATS-UNIS

For assistance, please call: 1-800-211-PANA (7262) or

send e-mail to: consumerproducts@panasonic.com (USA only)

CT-24SX12 CT-27SX12

WARNING: To reduce the risk of electric shock do not remove cover or back.

No user-serviceable parts inside. Refer servicing to qualified service personnel.

The exclamation point within a

triangle is intended to tell the

user that important operating

and servicing instructions are

in the papers with the

appliance.

The lightning flash with arrow

head within a triangle is

intended to tell the user that

parts inside the product are a

risk of electric shock to

persons.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

ANY CHANGES OR MODIFICATIONS TO THIS TV

RECEIVER NOT EXPRESSLY APPROVED BY

MATSUSHITA ELECTRIC CORPORATION OF AMERICA

COULD CAUSE HARMFUL INTERFERENCE, WHICH

WOULD VOID THE USER’S AUTHORITY TO OPERATE

THIS EQUIPMENT.

FCC CAUTION:

THIS PRODUCT UTILIZES BOTH A CATHODE RAY TUBE (CRT) AND

OTHER COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE

MATERIALS MAY BE REGULATED IN YOUR COMMUNITY DUE TO

ENVIRONMENTAL CONSIDERATIONS. FOR DISPOSAL OR RECYCLING

INFORMATION PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE

ELECTRONICS INDUSTRIES ALLIANCE: <HTTP://WWW.EIAE.ORG.>

ENVIRONMENTAL NOTICE:

T

ABLE OF

C

ONTENTS

1

Table of Contents

Congratulations.........................................................2

Customer Record ......................................................................2

Care and Cleaning.....................................................................2

Specifications ............................................................................2

Installation..................................................................3

Television Location....................................................................3

Optional Cable Connections......................................................3

AC Power Supply Cord..............................................................3

Cable / Antenna Connection......................................................3

Feature Chart .............................................................4

Auto Set Up Menu......................................................5

Optional Equipment Connections ...........................6

VCR Connection........................................................................6

Front Control Panel ...................................................................6

Digital TV - Set-Top Box or DVD Player Connection ................7

Amplifier Connection (TO AUDIO AMP) ...................................7

Remote Control Operation .......................................8

Mode Operational Key Chart ....................................................9

Programming the Remote .......................................................11

Programming With a Code......................................................11

Programming Without a Code.................................................11

Component Codes...................................................................12

Icon Menu Navigation .............................................14

Main Menu Icons......................................................15

Icon Menus..............................................................................15

Icon Menu Operation...............................................16

Set Up......................................................................................16

Picture .....................................................................................18

Timer .......................................................................................18

Audio .......................................................................................19

Channels .................................................................................21

Lock.........................................................................................22

V-Chip Menu Operation...........................................23

U.S. TV Programs ...................................................................23

U.S. Movies.............................................................................24

Rating Systems for Canada.....................................................26

Troubleshooting Chart............................................28

Limited Warranty.....................................................29

Customer Services Directory.................................31

Limited Warranty (Canada).....................................32

Index .........................................................................33

Read these instructions completely before operating television.

Contents are subject to change without notice or obligation.

Unauthorized copying and distribution is a violation of law.

2

C

ONGRATULATIONS

Congratulations

Your new Panasonic Tau television is designed to provide state-of-the-art picture quality and features an innovative pure

flat picture tube. The new dolphin gray cabinet with compact, elegant styling is designed to give you many years of

enjoyment. It was thoroughly tested and tuned at the factory for best performance.

Customer Record

The model and serial number of this product are located on the back of the television. You should note the model and serial

number in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event

of theft or loss. Product registration for U.S. customers is available at www.prodreg.com/panasonic.

Model

Number

Serial

Number

Care and Cleaning

Screen (Turn TV Off)

• Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE ABRASIVE CLEANERS.

• Avoid excessive moisture and wipe dry.

Note: Do not spray any type of cleaning fluid directly on the screen.

Cabinet and Remote Control

For cabinets and remote control, use a soft cloth dampened with water or a mild detergent solution. Avoid excessive moisture and

wipe dry.

Do not use benzene, thinner or other petroleum based products.

Specifications

Specifications are subject to change without notice or obligation.

Power Source

CT-24SX12 (2.2 A)

CT-24SX12U (2.2 A)

CT-27SX12 (2.4 A)

CT-27SX12U (2.4 A)

120V AC, 60Hz

Channel Capability - 181 VHF-12; UHF-56; Cable-113

Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type

Audio Input Jacks 500mV RMS 47K Ohm

Audio Output Jacks 0-2.0V RMS 4.7K Ohm

Componentinput(Y/P

B

/P

R

)

75 Ohms, Phono Jack Type

S-Video Input Jacks S-Video (Y-C) Connector

I

NSTALLATION

3

Installation

Television Location

Follow these recommendations before deciding the location of your television.

Avoid excessive sunlight or bright lights, including reflections.

Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.

Fluorescent lighting may reduce remote control transmitting range.

Keep away from magnetic equipment, including motors, fans and external speakers.

CAUTION: Use this television receiver only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from

tip-over. In order to avoid injury to children, never place your television receiver on a piece of furniture that is capable of

being tilted by a child leaning on it, pulling on it, standing on it, or climbing on it.

CT-27SX12:

CAUTION: This television receiver for use only with PANASONIC TY-27SX31P stand. Use with other carts (or stands) is capable

of resulting in instability causing possible injury.

CT-27SX12U:

CAUTION: This television receiver for use only with PANASONIC TY-27SX31P stand. Use with other carts (or stands) is capable

of resulting in instability causing possible injury.

Optional Cable Connections

Shielded audio and video cables should be used between components. For best results:

Use 75-ohm coaxial shielded cables.

Use appropriate input and output connectors that match your component connectors.

Avoid long cables to minimize interference.

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET

AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE

CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT OR PINCHED,

PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.

Cable / Antenna Connection

For proper reception, either a cable or antenna connection is required.

Cable Connection

Connect the cable supplied by your local cable company.

Note: A cable converter box may be required for proper reception. Check with your local cable company for

compatibility requirements.

Antenna Connection

• For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an

outdoor antenna is recommended.

Note: Cable Mode is preset at the factory. Antenna users must change to TV mode in the Set Up Menu under

Prog Chan.

Polarized plug

75 Ohm VHF/UHF

on back of TV

Incoming Cable from

Cable Company

Incoming

C

able

f

rom

Home Antenna

4

F

EATURE

C

HART

Feature Chart

MODELS

CT-24SX12

CT-27SX12

Features

MENU LANGUAGE (ENG/SPAN/FR)

VIDEO INPUT MEMORY

CHANNEL INFO BANNER

VIDEO INPUT SKIP

75 OHM INPUT

V-CHIP CAPABILITY

CLOSED CAPTIONING

VIDEO NORM

AUDIO NORM

STEREO

BASS/TREBLE/BALANCE

SURROUND

AI SOUND

BBE

NUMBER OF SPEAKERS 2 2

A/V IN

(REAR/FRONT)

3

(2/1)

3

(2/1)

AUDIO OUT

S-VIDEO INPUT

(REAR/FRONT)

2

(1/1)

2

(1/1)

COMPONENT VIDEO INPUT

(REAR/FRONT)

1

(1/0)

1

(1/0)

HEADPHONE

JACK

IMPORTANT INFORMATION REGARDING THE USE OF VIDEO GAMES, COMPUTERS, OR OTHER FIXED

IMAGE DISPLAYS.

WARNING: The marking or retained image on the picture tube resulting from viewing fixed image is not an

operating defect and as such is not covered by Warranty.

This television is designed to display constantly moving images on the screen. Continuous viewing of stationary

images such as letterbox pictures on standard screen TVs (with top/bottom bars), non-expanded standard (4:3)

pictures on wide screen TVs (with side bars shown on each side of an image), stock market report bars (ticker

running at the bottom of the screen), video game patterns, fixed scoreboards, bright station logos, on-line (Internet)

or repetitive computer style patterns should be limited.

The extended use of fixed image program material can cause a permanent picture tube damage, shown as a

“shadow image” viewable on normal programs. This type of irreversible picture tube deterioration can be limited by

performing the following steps:

• Do not display the fixed image for extended periods of time.

• Turn the power off when not in use.

A/V JACKS AUDIO SPECIAL

FETURES

A

UTO

S

ET

U

P

M

ENU

5

Auto Set Up Menu

For your convenience, Auto Set up menu will be displayed on screen when the set is turned on for the first time. If needed,

follow the menus and procedures for setting up the features.

GEOMAGNETIC CORR - This feature is used to adjust the tilt of the picture due to earth’s magnetic field in the area.

IDIOMA/LANGUE - To change menu language to ENGLISH, SPANISH or FRENCH.

MODE - To select TV (antenna) or CABLE mode depending on the signal source.

AUTO PROGRAM - To automatically program all channels with a signal.

IDIOMA/LANGUE ENGLISH

CABLEMODE

AUTO PROGRAM

PRESS ACTION TO EXIT

AUTO SET UP

FIRST PLEASE

CONNECT THE ANTENNA

GEOMAGNETIC CORR

Press to

display sub-menu.

VOL

GEOMAGNETIC CORRECTION

-------l-------

TO ADJUST

PRESS ACTION TO EXIT

0

tilt adjustment bar

Press or to

adjust the tilt adjustment bar

until it is parallel to the bottom of

the picture frame.

VOL

Press to select English, Spanish or French.

VOL

IDIOMA/LANGUE ENGLISH

CABLEMODE

AUTO PROGRAM

PRESS ACTION TO EXIT

AUTO SET UP

FIRST PLEASE

CONNECT THE ANTENNA

GEOMAGNETIC CORR

Press to select TV or CABLE.

VOL

IDIOMA/LANGUE ENGLISH

CABLEMODE

AUTO PROGRAM

PRESS ACTION TO EXIT

AUTO SET UP

FIRST PLEASE

CONNECT THE ANTENNA

GEOMAGNETIC CORR

Press to start Auto Programming.

VOL

IDIOMA/LANGUE ENGLISH

CABLEMODE

AUTO PROGRAM

PRESS ACTION TO EXIT

AUTO SET UP

FIRST PLEASE

CONNECT THE ANTENNA

GEOMAGNETIC CORR

6

O

PTIONAL

E

QUIPMENT

C

ONNECTIONS

Optional Equipment Connections

VCR Connection

VCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video inputs. See the

optional equipment manual for more information.

INPUT 1 is a dual-purpose input. It is primarily intended for connection with 480i devices such as a DVD player using the Y P

B

P

R

component video jacks and Audio L & R jacks. However, it can also be connected to conventional composite video sources such as a

VCR, using only the Y/Video jack and Audio L & R jacks. The on-screen label will display Component or Video 1 depending on which

source is connected.

Procedure

1. Connect equipment as shown to front or rear Audio/Video input jacks.

2. Select the Video mode by pressing TV/VIDEO button.

3. Operate optional equipment as instructed in equipment manual.

Front Control Panel

Use the front panel of the television to use the TV without remote or to use the Audio/Video input jacks for optional

equipment.

Press to select VIDEO input mode.

Note: The front control panel can be used to access menus and switch video mode when the remote control is not available.

TERMINALS ON FRONT OF TV

Jack used for 1/8"

headphone plug

L

R

ANT IN

VIDEO OUT

AUDIO OUT

ANT OUT

INPUT 3

S-VIDEO VIDEO L AUDIO R HPJ

CABLES NOT SUPPLIED

CONNECTIONS ON BACK OF TV

VCR

COMPONENT

VIDEO INPUT

INPUT 1

P

B

P

R

Y/VIDEO

VIDEO

INPUT 2

S-VIDEO

R

L

TO AUDIO

AMP

ANT

AUDIO

LR

RL

Use either the

S- Vi deo or V ideo

connection.

TV/VIDEO

F

RONT

C

ONTROL

P

ANEL

7

Digital TV - Set-Top Box (DTV-STB) or DVD Player Connection

Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) to the back of your TV.

There are three video inputs, Y, P

B

, and P

R

. Separate component color inputs provide luminance and color separation. Use the L

(left) and R (right) audio inputs.

Select DTV-STB to 480i output mode. TV set can receive 480i signal only.

Amplifier Connection (TO AUDIO AMP)

Connect to an external audio amplifier input for listening to a stereo system.

Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.

Audio Adjustments

1. Select TV SPEAKERS ON from AUDIO menu.

2. Set amplifier volume to minimum.

3. Adjust TV volume to desired level.

4. Adjust amplifier volume to match the TV.

5. Select TV SPEAKERS OFF&VAO from AUDIO menu.

6. Volume, mute, bass, treble and balance are now controlled from the TV.

Note: In OFF&FAO the volume is controlled by the external amplifier.

COMPONENT

VIDEO INPUT

INPUT 1

P

B

P

R

Y/VIDEO

VIDEO

INPUT 2

S-VIDEO

R

L

TO AUDIO

AMP

ANT

AUDIO

LR

RL

CABLES NOT SUPPLIED

TERMINALSONBACKOFDTV-STBORDVDPLAYER

COMPONENT VIDEO INPUT TERMINALS ON BACK OF TV

NTSC OUTPUT

R-AUDIO-L

DIGITAL OUTPUT

P

B

P

R

Y

R-AUDIO-L VIDEOS-VIDEO

COMPONENT

VIDEO INPUT

INPUT 1

P

B

P

R

Y/VIDEO

VIDEO

INPUT 2

R

L

TO AUDIO

AMP

ANT

AUDIO

LR

RL

CABLES NOT SUPPLIED

CONNECTIONS ON BACK OF TV

External Amplifier

8

R

EMOTE

C

ONTROL

O

PERATION

Remote Control Operation

POWER

Press to turn ON and OFF.

POWER

MUTE

Press to mute sound. Press to display and

cancel CC (Closed Caption).

SAP

Press to access second audio program.

TV/VIDEO

Press to select TV or Video mode.

Press to select remote operation.

T

V

C

R

D

B

S

/

C

B

L

D

V

D

ACTION

Press to access menus.

Press to select next or previous channel and

navigate in menus.

CH

Press to adjust TV sound and navigate in

menus.

VOLVOL

EXIT

DBS functions button.

GUIDE

DBS functions button.

REW

PLAY

FF

PAUSE

STOP

REC

TV/VCR

VCR /DBS CH

Component function buttons

Press numeric keypad to select any channel.

7

4

1 2

5

8

0

9

6

3

R-TUNE

Press to switch to previously viewed

channel or video mode.

EUR511502

EUR7613Z10

Battery Installation

Use two AA batteries:

Remove battery cover by pushing in and up near arrow.

Install batteries matching (+) and (-) polarity signs.

Replace the battery cover.

Note:

Incorrect installation can cause battery leakage and

corrosion that will damage the Remote Control

Precautions

• Replace batteries in pairs.

• Do not mix battery types (zinc carbon

with alkaline).

• Do not recharge, heat, short-circuit,

disassemble, or burn batteries.

PROG

Press to enter minor number in a compound

number (DBS mode only).

RECALL

Press to display time, channel, sleep timer,

and other options.

MENU

Press to access DBS or DVD menus.

R

EMOTE

C

ONTROL

O

PERATION

9

Mode Operational Key Chart

This chart defines the keys that are operational in the selected component modes (TV, VCR, DBS, CABLE or DVD) after

programming (if needed).

KEY NAME

TV MODE CABLE MODE DBS MODE

POWER

POWER POWER POWER

MUTE

MUTE TV MUTE TV MUTE

MENU

- - -

TV/VIDEO

INPUT SWITCH TV INPUT SWITCH TV INPUT SWITCH

CH

CHANNEL UP CABLE CHANNEL UP DBS NAVIGATION UP

CH

CHANNEL DOWN CABLE CHANNEL DOWN DBS NAVIGATION DOWN

VOL

VOL + TV VOL + DBS NAVIGATION RIGHT

VOL

VOL - TV VOL - DBS NAVIGATION LEFT

ACTION

TV MENU / ENTER - DBS MENU

RECALL

DISPLAY TV DISPLAY DBS PROG. INFO

SAP

SAP ON/OFF - STB AUDIO TRACK

EXIT

- - DBS EXIT

GUIDE

- - DBS GUIDE

PROG

- - DBS PROG

1

DIGIT 1 DIGIT 1 DIGIT 1

2

DIGIT 2 DIGIT 2 DIGIT 2

3

DIGIT 3 DIGIT 3 DIGIT 3

4

DIGIT 4 DIGIT 4 DIGIT 4

5

DIGIT 5 DIGIT 5 DIGIT 5

6

DIGIT 6 DIGIT 6 DIGIT 6

7

DIGIT 7 DIGIT 7 DIGIT 7

8

DIGIT 8 DIGIT 8 DIGIT 8

9

DIGIT 9 DIGIT 9 DIGIT 9

0

DIGIT 0 DIGIT 0 DIGIT 0

R-TUNE

PREVIOUS CHAN

OR VIDEO MODE

CABLE PREVIOUS

CHANNEL

PREVIOUS DBS CHANNEL

<<REW

VCR REWIND - -

PLAY

VCR PLAY - -

>>FF

VCR FAST FORWARD - -

PAUSE

VCR PAUSE - -

STOP

VCR STOP - -

RECORD

VCR RECORD - -

TV/VCR

TV/VCR SWITCH - -

VCR/DBSCH

VCR CHANNEL DOWN - DBS CHANNEL DOWN

VCR/DBS CH

VCR CHANNEL UP - DBS CHANNEL UP

10

R

EMOTE

C

ONTROL

O

PERATION

Mode Operational Key Chart (contd.)

KEY NAME

VCR MODE

DVD MODE

POWER

POWER POWER

MUTE

TV MUTE TV MUTE

MENU

- -

TV/VIDEO

TV INPUT SWITCH TV INPUT SWITCH

ACTION

- -

CHAN

- NEXT CHAPTER

CHAN

- PREVIOUS CHAPTER

VOL

TV VOLUME + NAVIGATION RIGHT

VOL

TV VOLUME - NAVIGATION LEFT

RECALL

ONSCREEN VCR

DISPLAY

DVD DISPLAY

SAP

- -

EXIT

- -

GUIDE

- -

PROG

- -

1

- -

2

- -

3

- -

4

- -

5

- -

6

- -

7

- -

8

- -

9

- -

0

- -

R-TUNE

- -

<<REW

VCR REWIND SKIP SEARCH REW <<

PLAY

VCR PLAY DVD PLAY

>>FF

VCR FF

SKIP SEARCH

FF>>

PAUSE

VCR PAUSE DVD STILL

STOP

VCR STOP DVD STOP

RECORD

VCR RECORD -

TV/VCR

TV/VCR SWITCH OPEN/CLOSE

VCR/DBS CH

VCR CHANNEL

DOWN

SLOW -

VCR/DBS CH

VCR CHANNEL UP SLOW +

R

EMOTE

C

ONTROL

O

PERATION

11

Programming The Remote

The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component

function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or

without a code for the component.

Determine the manufacturer of the component and look in the table for the code.

Programming With a Code

Procedure

• Confirm that the external component is plugged in and operating.

• Turn the component off.

• Press and together, for at least 5 seconds.

• Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.

• Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).

• Press the Remote Control to test the component. If the procedure was successful, the component will turn on.

Programming Without a Code

This procedure searches all codes and is called the “sequence method.”

• Confirm that the external component is plugged in and on.

• Turn the component off.

• Press and together, for at least 5 seconds.

• Press appropriate component button on the Remote Control.

• Press to move forward to the next code. Press to move backward.

• Press the Remote Control to test the component. If the procedure was successful, the component will turn on.

Note: Repeat the above steps until the component code is found. It may take many attempts before the correct code

is found.

• After the code is found, press to store the code.

Default Modes For Remote Control

Device Operates Default

TV TV (Panasonic Only) Panasonic TV Codes

VCR VCR (Preset) Panasonic VCR Codes

DBS DBS (Preset) Panasonic DBS Codes

CABLE CABLE (Preset) Panasonic DBS Codes

DVD DVD, CD (Preset) Panasonic DVD Codes

Helpful Hints: Unsuccessful Code

If the component does not operate with the Remote Control, repeat

the procedure using another code. (Some brands have multiple

codes).

If an incorrect code is entered, or if the procedure takes longer than

30 seconds, the programming will fail.

ACTION

POWER

ACTION

POWER

VOL

POWER

ACTION

12

R

EMOTE

C

ONTROL

O

PERATION

Component Codes

The Universal Remote Control is capable of operating many component brands after entering a code. Some components

may not operate because the codes are not available due to limited memory. The Universal Remote Control does not

control all features found in each model.

Write the code numbers from tables in this space. This will serve as a reference if you need

to program your Remote Control.

VCR DVD DBS CABLE

Brand Code

Admiral

335

Aiwa 332

Akai 314, 315, 316, 329

Audio Dynamic 311, 339

Bell & Howell 305, 313

Broksonic 320, 326

Canon 323, 325

CCE 343

Citizen 306

Craig 305, 306, 329

Curtis Mathes 324, 345

Daewoo 301, 324, 343

DBX 310, 311, 339

Dimensia 345

Emerson 303, 319, 320, 325, 326, 343

Fisher 305, 307, 308, 309, 313

Funai 320, 326, 334

GE 324, 333, 345

Goldstar 306

Gradiente 334

Hitachi 300, 323, 345

Instant Replay 323, 324

Jensen 339

JVC 310, 311, 334,339

Kenwood 306, 310, 311, 339

LXI 300, 305, 306,307, 308, 309

Magnavox 323, 324, 331

Marantz 310, 311, 339

Marta 306

Memorex 309, 324

MGA 338, 340, 341, 347,348

Minolta 300, 345

Mitsubishi 338, 340, 341, 347, 348

Multitech 304, 347

NEC 310,311, 334, 339

Olympic 323, 324

Optimus 306, 321, 328, 335

Brand Code

Orion 320, 326

Panasonic 321,322, 323, 324

J.C. Penney 300,305, 310, 311, 324, 339, 345

Pentax 300,311, 345

Philco 320, 323, 324, 326, 331, 343

Philips 323, 324, 331

Pioneer 323

Proscan

300, 301, 302, 323, 324, 331, 333,

345, 346

Quasar 321, 322, 323, 324

Radio Shack 305, 309, 324, 333, 336, 340

RCA

300, 301,302, 323, 324, 331, 333,

345, 346

Realistic 305, 309, 324, 336, 340

Samsung 302, 304, 333

Sansui 320, 326, 339, 352

Sanyo 305, 309, 313

Scott

301, 302, 304, 309, 320, 326, 338,

340, 347, 348

Sears 300, 305, 306, 307, 308

Sharp 335, 336

Shintom 317

Signature 2000 335

Singer 337

Sony 328, 329, 330

Sylvania 331, 324, 331

Tashiro 306

Tatung 310, 311, 339

Teac 310, 311, 339

Technics 321, 322, 323, 324

Teknika 324

Toshiba 301, 346

Vector Research 311

Wards 306, 309, 335, 336, 344

Yamaha 305, 310, 311, 339

Zenith 306,344

Codes For VCR

R

EMOTE

C

ONTROL

O

PERATION

13

Component Codes (cont’d.)

Brand Code

ABC 224

Archer 225, 232

Cableview 205, 232

Citizen 205, 222

Curtis 212, 213

Diamond 224, 225, 232

Eagle 229

Eastern 234

GC Brand 205, 232

Gemini 222

General

Instrument/

Jerrold

211, 219, 220, 221, 222, 223, 224,

225, 226, 227

Hamlin 212, 218, 240, 241, 242, 245

Hitachi 203, 224

Macom 203, 204, 205

Magnavox 233

Memorex 230

Movietime 205, 232

Oak 202, 237,239

Panasonic 209, 210, 214

Philips 206, 207, 228, 229, 230

Pioneer 201, 216

Pulsar 205, 232

Brand Code

Denon 100

Ferguson 101

JVC 109

Mitsubishi 105

Nordmende 101

Panasonic 100

Philips 103

Pioneer 102

RCA 101

Brand Code

Puser

232

RCA 215

Realistic 232

Regal 212, 218, 240, 241, 242, 245

Regency 234

Rembrandt 205,232,237

S.A. 211, 212, 213

Samsung 205

Scientific Atlanta 211, 212, 213

Slmark 201, 205

Sprucer 205, 210

Stargate 205, 232

Tel eview 201, 205

Texscan 244

Tocom 235

Toshiba 204

Unika 225, 232

Universal 222, 232

Videoway 206

Viewstar 229, 230

Zenith 200, 217

Zenith / Drake

Satellite

200

Brand Code

Saba

101

Samsung 110

Sharp 108

Sony 104

Technics 100

Thomson 101

Toshiba 103

Yamaha 100

Zenith 107

Codes for Cable Box

Codes for DVD

Codes for DBS

Brand Code

Panasonic

104

Philips 101, 102

Primestar 108

Proscan 106, 109, 110, 113

RCA 106, 109, 110, 113

Sony 107

Star Choice 103, 108

Toshiba 100

Uniden 101, 102

Brand Code

Dish Network

(Echostar)

105, 115, 116

Echo Star 105

Express VU 105, 115

G.E. 106

G.I. (General

Instrument)

108

Gradiente 114

Hitachi 103, 111, 112

HNS (Hughes) 103

Magnavox 101, 102

14

I

CON

M

ENU

N

AVIGATION

Icon Menu Navigation

Press to display the Icons.

Press to select desired icon.

Press to display selected

Icon features.

Press to select feature.

Press

VIDEO ADJ.

PICTURE

COLOR

TINT

BRIGHTNESS

PICTURE

SHARPNESS

NORMAL

NO

-- --

--

I -- -- --

-- -- -- -- ---- -- -- -- --

--

I

-- --

--

I -- -- --

-- --

--

I -- -- --

-- --

--

I -- -- --

OTHER ADJ.

VIDEO ADJ.

PICTURE

COLOR

TINT

BRIGHTNESS

PICTURE

SHARPNESS

NORMAL

NO

-- --

--

I -- -- --

-- -- -- -- ---- -- -- -- --

--

I

-- --

--

I -- -- --

-- --

--

I -- -- --

-- --

--

I -- -- --

OTHER ADJ.

to adjust or activate feature.

BRIGHTNESS 32 -- -- -- I -- -- --

Press repeatedly to exit menus.

NORMAL PICTURE

EXIT

M

AIN

M

ENU

I

CONS

15

Icon Menus

These charts list all menus under each Icon and which pages to refer to for menus description.

REFER

TO

PAGE

IDIOMA/LANGUE

MODE - (ENGLISH, FRANÇAIS, ESPAÑOL)

16

PROG CHAN

MODE - (TV or CABLE)

AUTO PROGRAM

MANUAL PROGRAM

16

CC (CLOSED CAPTIONED)

CC ON MUTE

CC MODE

17

OTHER ADJ.

AUTO POWER ON

CHANNEL BANNER

GEOMAGNETIC CORR

17

REFER

TO

PAGE

CLOCK SET

TIME

DAY

18

SLEEP

HOW LONG?

18

TIMER

DAY

ON TIME

OFF TIME

ENTER CHANNEL

SET

19

REFER

TO

PAGE

CAPTION

MANUAL CAPTION

INPUT LABEL

21

REFER

TO

PAGE

AUDIO ADJ.

MODE (STEREO, SAP or MONO)

BASS, TREBLE, BALANCE OR NORMAL

19

OTHER ADJ.

AI SOUND

BBE

20

SURROUND

MODE

20

SPEAKERS

ON

OFF & VARIABLE AUDIO OUT

OFF & FIXED AUDIO OUT

20

REFER

TO

PAGE

VIDEO ADJ

COLOR, TINT, BRIGHTNESS, PICTURE,

SHARPNESS OR NORMAL

18

OTHER ADJ.

COLOR TEMP

18

REFER

TO

PAGE

MODE

LOCK SET - (OFF, GAME, CHANNELS or ALL)

BLOCK PROGRAM

HOW LONG?

22

V-CHIP OPERATION

23

Main Menu Icons

EXIT

16

I

CON

M

ENU

O

PERATION

Icon Menu Operation

SET UP

Note: Refer to page 14 for Icon Menu Navigation procedures.

IDIOMA/LANGUE (Menu Languages)

In SET UP Menu, select IDIOMA/LANGUE to change menu language to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS

(French).

Prog Chan (Program Channels)

In SET UP menu under PROG CHAN select:

MODE - To select TV (antenna) or CABLE mode depending on the signal source.

AUTO PROGRAM - To automatically program all channels with a signal.

MANUAL PROGRAM - To manually add or delete channels.

Press to select English, Spanish or French.

VOL

SETUP

CC

IDIOMA/

LANGUE

PROG CHAN

OTHER ADJ.

MODE ENGLISH

Press to select TV or CABLE.

VOL

SETUP

CC

IDIOMA/

LANGUE

PROG CHAN

OTHER ADJ.

MODE

AUTO PROGRAM

MANUAL PROGRAM

CABLE

Press to start AUTO PROGRAM.

VOL

SETUP

CC

IDIOMA/

LANGUE

PROG CHAN

OTHER ADJ.

MODE

AUTO PROGRAM

MANUAL PROGRAM

CABLE

Press to display next

menu.

VOL

Note: Use Remote numeric keypad to enter channel

numbers.

SETUP

CC

IDIOMA/

LANGUE

PROG CHAN

OTHER ADJ.

MODE

AUTO PROGRAM

MANUAL PROGRAM

CABLE

SET UP

MANUAL PROGRAM

TO DELETE

TO ADD

ENTER CHANNEL

3

I

CON

M

ENU

O

PERATION

17

(Closed Captioning)

This television contains a built-in decoder that displays (Closed Captioned) text across the screen (white or colored

letters on black background). It allows the viewer to read the dialogue of a television program or other information. The

program viewed must include Closed Captioning for the feature to work.

On Mute

Activates the Closed Caption feature when the MUTE button on the remote control is pressed

Mode

Activates the onscreen Closed Caption feature by selecting one of the following modes:

OFF - When Closed Caption is not desired.

C1 - For video related information to be displayed, up to 4 lines onscreen at a time. (It does not block relevant parts of the picture).

Text may be in any language.

C2 - For other mode of video related information.

Other Adjustments

In SETUP Menu under OTHER ADJ. select:

AUTO POWER ON - Select SET to power up the TV at the same time as the Cable box or other components or select OFF.

CHANNEL BANNER - Select ON to display onscreen banner when changing channels.

GEOMAGNETIC CORR - This feature is used to adjust the tilt of the picture due to earth’s magnetic field in the area.

Note: Tilt Correction may be required at Set Up time or when the TV set is moved to a different location.

CC

Press to select C1, C2, or NO.

Note: This feature only functions when the Closed Caption Mode is OFF. The recommended

setupforClosedCaptiononMuteis:

• CCONMUTE:C1

•CCMODE:OFF

VOL

SETUP

IDIOMA/

LANGUE

PROG CHAN

OTHER ADJ.

CC

CC MODE OFF

CC ON MUTE NO

CC

Press to select C1, C2, or NO.

Note: C1 mode is recommended for viewing Closed Caption.

VOL

SETUP

IDIOMA/

LANGUE

PROG CHAN

OTHER ADJ.

CC

CC MODE OFF

CC ON MUTE NO

Press to select OFF or SET.

VOL

SETUP

IDIOMA/

LANGUE

PROG CHAN

OTHER ADJ.

CC

AUTO POWER ON OFF

CHAN BANNER OFF

GEOMAGNETIC CORR

Press to select OFF or ON.

Note: Press RECALL to display onscreen Channel Banner at anytime.

VOL

SETUP

IDIOMA/

LANGUE

PROG CHAN

OTHER ADJ.

CC

AUTO POWER ON OFF

CHAN BANNER OFF

GEOMAGNETIC CORR

Press to

display sub-menu.

VOL

SETUP

IDIOMA/

LANGUE

PROG CHAN

OTHER ADJ.

CC

AUTO POWER ON OFF

CHAN BANNER OFF

GEOMAGNETIC CORR

GEOMAGNETIC CORRECTION

-------l-------

TO ADJUST

PRESS ACTION TO EXIT

0

tilt adjustment bar

Press or to

adjust the tilt adjustment bar

until it is parallel to the bottom of

the picture frame.

VOL

18

I

CON

M

ENU

O

PERATION

PICTURE

Note: Refer to page 14 for Icon Menu Navigation procedures.

Video Adj.

In Picture menu under VIDEO ADJ. select:

COLOR - Adjusts desired color intensity.

TINT - Adjusts natural flesh tones.

BRIGHTNESS - Adjusts dark areas of picture.

PICTURE - Adjusts white areas of picture.

SHARPNESS - Adjusts clarity of outline detail.

NORMAL - Reset all picture adjustments to factory default settings.

Other Adj.

In Picture menu under OTHER ADJ. select:

COLOR TEMP - To increase and decrease WARM (red) and COOL (blue) colors to suit personal preferences.

TIMER

Clock Set

Set the time and the day of the week.

Sleep Timer

In TIMER menu, select SLEEP to turn television off in 30, 60 or 90 minutes. Select NO to turn off timer.

Press to select desired picture adjustment.

Press or to adjust.

Video Input Memory

Video adjustments can be individually set for each video input mode.

CH

VOL

VIDEO ADJ.

PICTURE

COLOR

TINT

BRIGHTNESS

PICTURE

SHARPNESS

NORMAL

NO

-- -- -- I -- -- --

-- -- -- -- ---- -- -- -- -- -- I

-- --

-- I -- -- --

-- -- -- I -- -- --

OTHER ADJ.

Press to select WARM, COOL or NORMAL.

VOL

VIDEO ADJ.

PICTURE

COLOR TEMP NORMAL

OTHER ADJ.

Press or to select hours AM or PM.

Press to select minutes position.

Press or to select minutes.

Press to highlight DAY, then press to select day.

VOL

CH

VOL

CH

VOL

CLOCK SET

TIMER

TIME - : - -

SLEEP

TIMER

AM

DAY _ _ _

Press to select 30, 60, 90 or NO.

VOL

SLEEP

TIMER

HOW LONG?

CLOCK SET

TIMER

NO

Page is loading ...

Panasonic CT 24SX12 User manual

This manual is also suitable for

Panasonic CT 24SX12 User manual

in other languages

Related papers

Other documents