Philips FW-D5D User manual
- Category
- Home audio sets
- Type
- User manual
This manual is also suitable for
3139 116 19771
1
Toll Free Help Line
Ligne d'assistance en service libre
Linea de ayuda telefónica sin cargo
800-531-0039
Mini Hi-Fi System
FW-
D5
with DVD and 3 CD changer
pg 01-43/D5/37-Eng 7/13/00, 11:49 AM1
3139 116 19711
2
Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
• Once your Philips purchase is registered,you’re eligible to receive
all the privileges of owning a Philips product.
• So complete and return the Warranty Registration Card enclosed
with your purchase at once.And take advantage of these
important benefits.
Warranty
Verification
Registering your product within 10 days
confirms your right to maximum protection
under the terms and conditions of your
Philips warranty.
Owner
Confirmation
Your completed Warranty Registration
Card serves as verification of ownership in
the event of product theft or loss.
Model
Registration
Returning your Warranty Registration Card
right away guarantees you’ll receive all
the information and special offers which you
qualify for as the owner of your model.
t
This “bolt of lightning” indicates uninsulated material
within your unit may cause an electrical shock. For the
safety of everyone in your household,please do not
remove product covering.
s
The “exclamation point” calls attention to features for
which you should read the enclosed literature closely to
prevent operating and maintenance problems.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.
CAUTION: To prevent electric shock,match wide
blade of plug to wide slot,and fully insert.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
For Customer Use
Enter below the Serial No.which is located on the
rear of the cabinet.Retain this information for
future reference.
Model No. _______________________________
Serial No. ________________________________
Know these
ssaaffeettyysymbols
MAC5097
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM2
3139 116 19771
3
Visit our World Wide Web Site at http://www.philipsusa.com
Thank you for your confidence in Philips.You’ve selected one
of the best-built,best-backed products available today.And
we’ll do everything in our power to keep you happy with
your purchase for many years to come.
As a member of the Philips “family,” you’re entitled to
protection by one of the most comprehensive warranties
and outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll receive all
the information and special offers for which you qualify,
plus easy access to accessories from our convenient home
shopping network.
And most importantly you can count
on our uncompromising commitment to your total
satisfaction.
All of this is our way of saying welcome–and thanks for
investing in a Philips product.
Sincerely,
Robert Minkhorst
President and Chief Executive Officer
P.S.Remember,to get the most from your Philips
product,you must return your Warranty
Registration Card within 10 days. So please mail
it to us right now!
R
E
G
I
S
T
R
A
T
I
O
N
N
E
E
D
E
D
W
I
T
H
I
N
1
0
D
A
Y
S
•
Hurry!
Congratulations on your purchase,
and welcome to the “family!”
Dear Philips product owner:
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM3
3139 116 19774
4
English
IMPORTANT SAFETY INSTRUCTIONS – Read before operating equipment
This product was designed and manufactured to meet
strict quality and safety standards. There are, however,
some installation and operation precautions which you
should be particularly aware of.
1. Read these instructions – All the safety and
operating instructions should be read before the
appliance is operated.
2. Keep these instructions – The safety and
operating instructions should be retained for
future reference.
3. Heed all warnings – All warnings on the
appliance and in the operating instructions should
be adhered to.
4. Follow all instructions – All operating and use
instructions should be followed.
5. Do not use this apparatus near water – for
example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement or near a
swimming pool, etc.
6. Clean only with a damp cloth. The appliance
should be cleaned only as recommended by the
manufacturer.
7. Install in accordance with the
manufacturers instructions. Do not block
any of the ventilation openings. For
example, the appliance should not be situated on
a bed, sofa, rug, or similar surface or placed in a
built-in installation, such as a bookcase or cabinet
that may impede the flow of air through the
ventilation openings.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the
safety purpose of
the polarized or
grounding-type plug.
A polarized plug has two blades with one wider
than the other. A grounding type plug has two
blades and a third grounding prong. The wide
blade or the third prong are provided for your
safety. When the provided plug does not fit into
your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked
on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
12. Use only with a cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
EL 4562-E004: 99/3
AC Polarized
Plug
This symbol warns the user that uninsulated voltage
within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make
any kind of contact with any inside part of this unit.
This symbol alerts the user that important literature
concerning the operation and maintenance of this
unit has been included. Therefore, it should be read
carefully in order to avoid any problems.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
CAUTION
Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure.
The set complies with the FCC-Rules, Part 15 and with
21 CFR 1040.10.
Canada
This digital apparatus does not exceed the Class B limits
for radio noise emissions from digital apparatus as set
out in the Radio Interference Regulations of the Canadian
Department of Communications.
CAUTION
:
INVISIBLE LASER RADIATION
WHEN OPEN. DO NOT STARE INTO BEAM.
DANGER
:
INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM4
EnglishFrançais
Español
3139 116 19xxx (ENG)
5
English ............................ 7
Français ........................ 47
Español ......................... 89
INDEX
CLASS 1
LASER PRODUCT
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM5
3139 116 19711
6
LASER SAFETY
This unit employs a laser. Only a qualified service
person should remove the cover or attempt to
service this device, due to possible eye injury.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE POWER
SWITCHED ON.
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN AVOID EXPOSURE TO BEAM (WARNING
LOCATION: INSIDE ON LASER COVERSHIELD)
The region code for this set is 1.
Since it is usual for DVD movies to be released at
different times in different regions of the world, all
players have region codes and discs can have an
optional region code. If you load a disc of a
different region code to your player, you will see the
region code notice on the screen. The disc will not
play, and should be unloaded.
1
For Customer Use:
Read carefully the information located at the
bottom of your DVD-VIDEO player and enter
below the Serial No. Retain this information for
future reference.
Model No. __________________________
Serial No. __________________________
Dolby Surround and the double-D symbol d are
trademarks of Dolby Laboratories Licensing
Corporation.
Manufactured under license from Dolby Laboratories
Licensing Corporation.
Manufactured under license from Dolby Laboratories.
“Dolby”, “AC-3” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished Works. ©1992-1997 Dolby Laboratories,
Inc. All rights reserved.
TruSurround and the SRS symbol are trademarks of
SRS Labs., Inc. TruSurround technology is manufactured
under license from SRS Labs., Inc.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intented for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
LASER
Type Semiconductor laser GaAlAs
Wave length 650 nm (DVD)
785 nm (VCD/CD)
Output Power 7 mW (DVD)
10 mW (VCD/CD)
Beam divergence 60 degree.
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM6
3139 116 19774
7
English
General Information.......................................................... 8
Safety Information............................................................. 8
Preparation .................................................................9 - 11
Controls .....................................................................12 - 14
Operating The System ..............................................15 - 17
DVD-VIDEO ...............................................................18 - 32
CD ..............................................................................33 - 35
Tuner..........................................................................36 - 37
AUX/CDR.......................................................................... 37
Clock................................................................................. 38
Timer..........................................................................38 - 39
Sleep Timer ...................................................................... 39
Specifications ................................................................... 40
Maintenance .................................................................... 41
Troubleshooting.........................................................41 - 42
INDEX
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM7
3139 116 19774
8
English
General Information
• The typeplate (which contains
the serial number) is located at
the rear of the system.
• Recording is permissible if
copyright or other rights of third
parties are not infringed.
• This device complies with the
Federal Communications
Commission (FCC) rules, part 15
and with 21 CFR 1040.10.
Operation is subject to the
following two conditions:
– This device may not cause
harmful interference, and
– This device must accept any
interference received, including
interference that may cause
undesired operation.
Environmental
Information
All unnecessary packaging has been
omitted. We have tried to make the
packaging easy to separate into three
materials: cardboard (box), polystyrene
foam (buffer) and polyethylene (bags,
protective foam sheet).
Your system consists of materials which
can be recycled and reused if
disassembled by a specialized company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
Energy Star
As an ENERGY STAR
R
Partner, Philips
has determined that this product meets
the ENERGY STAR
R
guidelines for
energy efficiency.
Accessories (Supplied)
– Remote control
– Batteries (two AA size) for remote
control
– AM loop antenna
– FM wire antenna
– AC power cord
– CS-05 speaker package (includes one
pair of surround speakers and one
center speaker)
– CVBS cable cinch
GENERAL INFORMATION SAFETY INFORMATION
Safety Information
• Before operating the system, check
that the operating voltage indicated
on the typeplate (or the voltage
indication beside the voltage
selector) of your system is identical
with the voltage of your local power
supply. If not, please consult your
dealer. The typeplate is located at the
rear of your system.
• When the system is switched on, do
not move it around.
• Place the system on a solid base (e.g.
a cabinet).
• Place the system in a location with
adequate ventilation to prevent
internal heat build-up in your system.
Allow at least 10 cm (4 inches)
clearance from the rear and the top
of the unit and 5 cm (2 inches) from
each side.
• Do not place the system on soft
carpet that will cover the ventilation
hole at the bottom.
• The system incorporates a built-in
safety feature that prevents
overheating.
• Do not expose the system to
excessive moisture, rain, sand or heat
sources.
• Under no circumstances should you
repair the system yourself, as this will
invalidate the warranty!
• If the system is brought directly from
a cold to a warm location, or is
placed in a very damp room,
moisture may condense on the lens
of the CD/DVD unit inside the
system. Should this occur, the player
will not operate normally. Leave the
power on for about one hour with
no disc in the system until normal
playback is possible.
• Electrostatic discharge may cause
unexpected problems. See whether
these problems disappear if you
unplug the AC power cord and plug
it in again after a few seconds.
• To disconnect the system from
the power supply completely,
remove the AC power plug
from the wall socket.
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM8
3139 116 19774
9
English
PREPARATION
Rear Connections
AM ANTENNA
SUB-
WOOFER
OUT
LINE-OUT
AUDIO OUT
L
R
HIGH POWER SUBWOOFER
S
U
B
W
O
O
F
E
R
L
E
V
E
L
C
O
N
T
R
O
L
STANDBY ON
CUT OFF FREQUENCY
60Hz 150Hz
MIN MAX
AUDIO IN
L
B
AC
MAINS
~
REAR
SURROUND
L
+
–
R
–
+
D
A
C
FRONT
LR
L
+
–
R
–
+
F
surr.
L
surr.
R
SURROUND OUT
AUX/CDR-IN
S-VIDEO
OUT
(Y/C)
VIDEO OUT
(CVBS)
AUDIO
DIGITAL
OUT
W
G
H
I
K
J
L
surr.
R
surr.
FM ANTENNA 300Ω
E
C
E
N
T
E
R
CENTER
+
–
A AM Loop Antenna
Connection
Connect the supplied loop antenna to
the AM ANTENNA terminal. Place the
AM loop antenna far away from the
system and adjust its position for the
best reception.
B FM Wire Antenna
Connection
Connect the supplied FM wire antenna
to the FM ANTENNA 300 Ω terminal.
Adjust the position of the FM antenna
for the best reception.
Outdoor Antenna
For better FM stereo reception,
connect an outdoor FM antenna to the
FM ANTENNA 300 Ω terminal using a
300 Ω dipole wire.
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM9
3139 116 19774
10
English
PREPARATION
D Center Speaker
Connection
Connect the black (non-marked) wires
to the black CENTER terminal and the
blue (marked wires) to the blue
CENTER terminal.
E Rear Surround
Speakers’ Connection
Connect the black (non-marked) wires
to the black REAR SURROUND
terminals and the colored (marked)
wires to the grey REAR SURROUND
terminals.
F Subwoofer Out
Connection
Connect the optional active subwoofer
to the SUBWOOFER OUT terminal.
The subwoofer reproduces just the low
bass sound effect (e.g. explosions, the
rumble of spaceships, etc.). Be sure to
follow the instructions supplied with the
subwoofer.
C Speakers Connection
• Connect the right speaker to Front
terminal R, with the colored wire to
+ and the black wire to -.
• Connect the left speaker to Front
terminal L, with the colored wire to
+ and the black wire to -.
• Clip the stripped portion of the
speaker wire as shown.
lock
12 mm
unlock
CAUTION:
– For optimal sound performance, it is
recommended to use the supplied
speakers.
– Do not connect more than one speaker
to any one pair of +/- speaker
terminals.
– Do not connect speakers with
impedance lower than the speakers
supplied. Please refer to the
SPECIFICATIONS section of this
manual.
G Wireless Surround Out
Connection
You may connect the transmitter of the
wireless rear speakers (not supplied)
to
the SURROUND OUT terminal. Be
sure to follow the instructions supplied
with the wireless surround speakers.
Note:
– Availability of a wireless transmitter and
its peripherals are subjected to the
approval of local authorities. Please
check with the respective local safety
or approving authority.
H Line Out Connection
(wireless ready)
You can connect the audio left and right
LINE OUT terminals to a optional CD
Recorder's ANALOG IN terminals. This
allows you to record in an analog
format.
You can also install additional optional
front active speakers away from the
system (e.g. in another room) to reduce
the inconvenience of running long
speaker wires across rooms. You can
place as many remote speakers as you
like provided they operate at the same
radio frequency.
Connect the wireless radio frequency
transmitter to the LINE OUT terminals.
Place the active speakers at your
preferred location. Be sure to follow the
instructions supplied with the active
speakers.
I Connecting other
equipment to your
system
You can connect the audio left and right
OUT terminals of a TV, VCR, Laser Disc
player, DVD player or CD Recorder to
the AUX/CDR IN terminals at the rear
of the system.
J Video Out Connection
Connect the VIDEO OUT (CVBS)
terminal at the rear of the system to
the TV or VCR VIDEO IN terminal for
viewing or recording.
Note:
– You can also choose to connect the
S-VIDEO OUT (Y/C) terminal at the
rear of the system to the S-VIDEO IN
of the TV using an optional S-VIDEO
cable.
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM10
3139 116 19774
11
English
K Audio Digital Out
Connection
You can record the digital sound from
the CD/DVD, through this output, on
any audio equipment with digital input
(e.g. CD Recorder, Digital Audio Tape
(DAT) deck, Digital to Analog
Converter and Digital Signal Processor).
Connect one end of the cinch cable
(not supplied) to the DIGITAL OUT
socket and the other end to the audio
equipment's digital input. When
connecting the cinch cable, make sure it
is fully inserted.
L AC Power Supply
After all other connections have been
made, connect the AC power cord to
the system and to the wall outlet.
Inserting batteries into the
Remote Control
• Insert the batteries (Type R06 or
AA) into the remote control as
shown in the battery compartment.
• To avoid damage from possible
battery leakage, remove dead
batteries or batteries that will not be
used for a long time. For
replacement, use type R06 or AA
batteries.
PREPARATION
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM11
3139 116 19774
12
English
CONTROLS
R
E
T
U
R
N
P
E
R
S
O
N
A
L
V
E
C
D
S
C
D
B
B
DISC CHANGE
CD 1 CD 2 CD 3
OPEN•CLOSE
STANDBY
ON
DC
3
CHANGER
DVD MINI HIFI SYSTEM
DIM
PROG
POWER SAVE
IR SENSOR
RDS / CD TEXT
NEWS
/ T.A.
0
CLOCK/
TIMER
VOLUME
AXIS
OK
DVD
MENU
DVD
SOUND JOG
DVD JOG
PLAYBACK
MODE
DVD
VCD
CD
OPEN
/
CLOSE
MIC LEVEL
MIC
DVD / VCD / CD PLAYBACK
!
P3 P6P1 P2 P5P4
FTS TITLE CHAP. SLEEP
SLEEP
DIM TIMERLWFM A M W
TUNER
DVD
CD
AUX
A
-
B
P
B
C
1
2
4
ª
º
§
5
6
9
7
8
@
Å
É
1
3
2
4
6
5
7
9
8
VOLUME
0
2
AUX/CDR
TV/AV
DVD
CD
TUNER
SHUFFLEREPEAT
FTS
⁄
&
£
¤
‹
(
‡
•
fi
@
≤
∞
&
‚
+
DSC VEC DBB MUTE
$
›
FM•AM
VCD
• CD
CD 1
• 2 • 3
CDR
3
LEFT CENTER RIGHT
SURR
SURR
SURROUND CONTROL
@
·
!
4
STOP•CLEAR
SEARCH•TUNING
PLAY PAUSE
PREV NEXTSIDE
PRESET
▲
▲
S
C
A
N
CHANNEL
5.1CH / STEREO / SURR / 3D
É
É
É
DVD
OK
OSD
SURR.
MENU
PROG. A-B SLEEP TIMER
SUBTITLE ANGLE AUDIO ZOOM
STOP PLAY
É
á
à
ë
í
Ç
•
≥
≤
*
(
&
^
%
$
#
)
fl
°
™
£
∞
¡
@
@
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM12
3139 116 19774
13
English
CONTROLS
Controls on the system
and remote control
1 STANDBY ON
– to switch the system on or to
standby mode.
– to use for EASY SET.
2 POWER SAVE
– to switch the system to energy
saving mode.
3 IR SENSOR
– sensor for the infrared remote
control.
4 SOURCE – to select the
following:
DVD / (VCD•CD)
– to select DVD mode. When in
DVD mode, you can play DVD,
VCD or CD.
CD / (CD 1•2•3)
– to select CD mode. When CD
playback is stopped, press to select
disc tray 1, 2 or 3.
TUNER / (FM•AM)
– to select Tuner mode. When in
tuner mode, press to select the
waveband: FM or AM.
AUX / (CDR)
– to select sound from an external
source (e.g. TV, VCR, Laser Disc
player, DVD player or CD
Recorder). When in AUX mode,
press to select either AUX or
CDR.
TV/AV (only on the remote control)
– to select TV or Video mode.
5 DISPLAY SCREEN
– to view the current setting of the
system.
6 CD CAROUSEL TRAY
7 DISC CHANGE
– to change CD(s).
8 OPEN•CLOSE
– to open or close the CD carousel
tray.
9 CD 1 / CD 2 / CD 3 (CD
DIRECT PLAY)
– to select a CD tray for playback.
0 SURROUND SOUND
DISPLAY PANEL
– to view the selected Surround
setting.
! SURROUND CONTROL
(SURR)
– to select Multichannel Sound,
Stereo, Surround or 3D Sound
mode (in DVD mode only).
@ MODE SELECTION
SEARCH•TUNING à á
(1 2)
for DVD/VCD/CD
– to search backward/forward
(except for CD playback in DVD
mode).
for TUNER
– to tune to a lower or higher
radio frequency.
for CLOCK (on the system only)
– to set the hour.
for TV VOL.
– to adjust the TV volume if the
remote operates your TV.
STOP•CLEAR Ç
for DVD/VCD/CD
– to stop playback (in DVD mode
only).
for CD
– to stop playback or to clear a
program (in CD mode only).
for TUNER
– to stop programming.
for DEMO (on the system only)
– to start or stop demonstration
mode.
PLAY PAUSE ÉÅ
for DVD/VCD/CD
– to start or interrupt playback.
for DVD/VCD
– to watch a still picture.
í PREV / NEXT ë
(PRESET)
for DVD/VCD/CD
– to skip to the beginning of the
current, previous, or next title or
track.
for VCD only
– to select next or previous
MENU (for VCD with PBC on).
– to select next or previous VCD
track during playback (for VCD
with PBC off).
for TUNER
– to select a preset radio station in
memory.
for CLOCK (on the system only)
– to set the minute .
# CLOCK/TIMER
– to view the clock, set the clock or
set the timer.
$ SOUND CONTROL
– to select the desired sound feature:
VEC, PERSONAL, DSC or DBB.
% SOUND JOG – to select the
desired sound effect of VEC/
PERSONAL/DSC/DBB setting. You
must select the respective sound
feature first.
VEC
– to select the desired Virtual
Environment Control effect : HALL,
CLUB, DISCO, CINEMA,
CONCERT or ARCADE.
PERSONAL
– to select up to 6 personal
preferred Spectrum Analyzer
settings : PERSONAL 1-6.
DSC
– to select the desired Digital Sound
Control effect : OPTIMAL,
CLASSIC, TECHNO, VOCAL,
ROCK or JAZZ.
DBB
– to select a Dynamic Bass Boost
level : BEAT, PUNCH or BLAST.
^ n
– to connect headphones.
& VOLUME
– to increase or decrease the
volume.
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM13
3139 116 19774
14
English
CONTROLS
* DIM
– to select brightness for the display
screen : DIM 1, DIM 2, DIM 3 or
DIM OFF.
( PROGram (FTS - Favorite
track selection)
for DVD/VCD/CD
– to program disc tracks.
for TUNER
– to program preset radio
stations.
for CLOCK (on the system only)
– to select 12 or 24 hour in clock
setting mode.
) DVD-VIDEO DISC TRAY
¡ OPEN/CLOSE 0
– to open or close the DVD-VIDEO
disc tray.
™ PLAYBACK MODE
– to view the selected playback
mode : DVD, VCD or CD.
£ DVD MENU
– to access the DVD disc menu.
≤ OK
– to confirm the selection.
∞ AXIS ( 1 2 3 4 )
– to select the direction of cursor
movement : up/down or left/right.
– (on the remote control only)
to select movement of cursor: left,
right, up or down.
§ DVD JOG
– to move the cursor up/down or
left/right. You must select the AXIS
movement direction first.
≥ SCAN
for DVD
– to playback the first 10 seconds
of each chapter within a title.
for VCD/CD
– to playback the first 10 seconds
of each track.
• A - B (in DVD mode only)
– to playback a certain scene or
passage of a disc repeatedly.
– to repeat playback a Chapter/Index,
Title/Track or Disc.
ª PBC (PLAYBACK CONTROL)
– to switch on or off PBC mode
(
for
VCD version 2.0 only)
.
º RETURN
– to return to the previous MENU
level during playback.
⁄ REPEAT (in CD mode only)
– to repeat a disc track, a disc, or all
available discs.
¤ OSD MENU (ON SCREEN
DISPLAY)
– to switch on or off the on screen
display on the TV screen.
‹ SUBTITLE
– to select different subtitle languages
available in the DVD disc.
› ANGLE
– to select a camera angle available in
the DVD disc.
fi MUTE
– to switch off the sound temporarily.
fl SLEEP
– to switch the system to standby
mode at a selected time.
‡ TIMER
– to switch on or off the timer.
° AUDIO
– to select different audio languages
available in the DVD disc.
· ZOOM
– to enlarge a still picture on the TV
screen.
‚ SHUFFLE
– to play all the available discs and
their tracks in random order.
DIGIT 0 – 9
(numbers consisting more than two
figures must be keyed in within two
seconds.)
for DVD/VCD/CD
– to key in a disc title or track for
playback or programming.
for VCD with PBC on only
– to select a track.
for TUNER
– to key in a preset radio station.
+ B
– to switch the system to standby
mode.
Notes for remote control:
– First select the source you wish
to control by pressing one of the
source select keys on the remote
control (e.g. DVD, TUNER, etc.).
– Then select the desired function
(
É
,
í
,
ë
, etc.).
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM14
3139 116 19774
15
English
Important:
Before you operate the system,
complete the preparation
procedures.
Demonstration mode
The system has a demonstration mode
that shows the various features offered
by the system. When the system is
switched on for the first time, the
demonstration mode will start
automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
or power save mode, the demonstration
will resume five seconds later.
To stop the demonstration mode
• Press and hold Ç(on the system
only) for five seconds when the
system is in demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" will be displayed.
™ The system will switch to standby
mode.
OPERATING THE SYSTEM
Notes:
– When the system is switched on from
the main power outlet, the CD carousel
tray may open and close again to
initialize the set.
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold Ç(on the system
only) for five seconds when the
system is in standby mode.
™ The demonstration will begin.
Easy Set
EASY SET allows you to store all
available radio stations automatically.
• Press and hold STANDBY ON (on
the system only) for five seconds
when the system is in standby or
demonstration mode.
™ "EASY SET" will be displayed, and
followed by "TUNER" and then
"AUTO".
™ EASY SET will search for all radio
stations on FM band and then
search for radio stations on AM
band.
™ All available radio stations with
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
Notes:
– EASY SET will start with the FM band,
if there are still presets available, the
system will continue to store the AM
band.
– When EASY SET is used, all previously
stored radio stations will be replaced.
– The last preset radio station will
appear on the display when EASY SET
is completed.
Switching the system ON
• Press DVD, CD, TUNER or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT
PLAY buttons.
Switching the system to
standby mode
• Press STANDBY ON or B on
the remote control.
™ The system will switch to standby
mode.
R
E
T
U
R
N
P
E
R
S
O
N
A
L
V
E
C
D
S
C
D
B
B
STANDBY
ON
DVD MINI HIFI SYSTEM
DIM
PROG
POWER SAVE
IR SENSOR
RDS
/
CD TEXT
NEWS
/
T.A.
CLOCK/
TIMER
VOLUME
AXIS
OK
DVD
MENU
SOUND JOG
DVD JOG
P3 P6P1 P2 P5P4
CHAP.
CHAP.
SLEEP DIM TIMERLWFM AMW
TUNER
DVD
CD
AUX
A
-
B
P
B
C
FM•AM
VCD
•
CD
CD 1
•
2
•
3
CDR
LEFT CENTER RIGHT
SURR
SURR
STOP•CLEAR
SEARCH•TUNING
PLAY PAUSE
PREV NEXTSIDE
PRESET
▲
▲
S
C
A
N
CHANNEL
DVD
SURROUND CONTROL
5.1CH / STEREO / SURR / 3D
FTS
FTS
TITLE
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM15
3139 116 19774
16
English
Switching the system to
power save mode (when the
Demonstration is stopped)
• Press POWER SAVE to switch to
energy saving mode ( < 2 watts ).
™ "LOW POWER STANDBY ON" will
be displayed, after which the
display screen goes blank.
™ The low power STANDBY ON
LED will be lit.
Note:
– if the demonstration mode has not
been disabled, it will resume five
seconds later.
Selecting the Source
• Press the desired source selection
button: DVD, CD, TUNER or
AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the
AUX/CDR IN terminals.
OPERATING THE SYSTEM
Dim mode
You can select the desired brightness
for the display.
• Press DIM to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
™ The DIM appears on the display.
™ "DIM 1", "DIM 2", "DIM 3" or
"DIM OFF" will be displayed
depending on the mode selected.
DIM OFF - normal brightness with
Spectrum Analyzer On
P3 P6P1 P2 P5P4
FTS TITLE CHAP. SLEEP
SLEEP
DIM TIMERLWFM A M W
DIM 1 - normal brightness with
Spectrum Analyzer Off
P3 P6P1 P2 P5P4
FTS TITLE CHAP. SLEEP
SLEEP
DIM TIMERLWFM A M W
DIM 2 - half brightness with
Spectrum Analyzer On
P3 P6P1 P2 P5P4
FTS TITLE CHAP. SLEEP
SLEEP
DIM TIMERLWFM A M W
DIM 3 - half brightness with
Spectrum Analyzer Off and all LEDs
on the system will be switched off.
P3 P6P1 P2 P5P4
FTS TITLE CHAP. SLEEP
SLEEP
DIM TIMERLWFM A M W
Volume Control
Adjust VOLUME to increase or
decrease the sound level.
For Personal Listening
Connect the headphones plug to the
n socket at the front of the system.
The speakers will be muted.
MUTE (on remote control only)
This feature allows you to temporarily
switch off the sound without switching
off the system when you require a
moment of silence.
1 Press MUTE on the remote control
to switch off the sound.
™ "MUTE" will be displayed.
2 Press MUTE again on the remote
control or increase the VOLUME
level to switch on the sound.
Sound Control
For Optimal sound listening, you
can only select one of the following
sound controls at a time : VEC,
PERSONAL or DSC.
VIRTUAL ENVIRONMENT
CONTROL (VEC)
The VEC feature enables you to adjust
the system to select a type of
environment.
1 Press to select the VEC feature.
2 Adjust the JOG to select the desired
VEC setting : HALL, CLUB, DISCO,
CINEMA, CONCERT or ARCADE.
™ The selected environment is
encircled.
™ "HALL, CLUB, DISCO, CINEMA,
CONCERT or ARCADE" will be
displayed.
PERSONAL SOUND
You can store up to 6 personal settings.
1 Press to select the PERSONAL
feature.
2 Adjust the JOG to select the desired
Personal setting.
™ The selected personal setting
number will appear on the display.
™ If no name has been stored
previously, "PERSONAL X" will be
displayed. "X" is the setting
number.
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM16
3139 116 19774
17
English
OPERATING THE SYSTEM
Personal Setting
You can adjust the personal setting to
your desired level with the JOG control.
1 Press and hold PERSONAL for
about five seconds to switch on the
personal setting mode.
™ "SELECT PRESET NUMBER" will
be displayed.
2 Adjust the JOG to select the desired
preset number for personal setting
and press á to confirm the
selection.
™ "ADAPT LOW FREQ LEVEL" will
be displayed.
3 Adjust the JOG to select the desired
Spectrum Analyzer band level for
low frequency.
™ The level will increase or decrease
between+3 and -3.
4 Press á to confirm the selection.
™ "ADAPT MID FREQ LEVEL" will
be displayed, followed by "ADAPT
HIGH FREQ LEVEL".
• Repeat step 3 - 4 to select the
desired middle and high frequencies
of the Spectrum Analyzer band levels.
5 You can edit the name for the
personal setting.
™ The first character of the setting
name will be flashing.
6 Adjust the JOG to select the desired
letter, number or symbol.
™ "A to Z", "0 to 9" or "*, -, +, \, /, _".
7 Press á to confirm the selection.
™ The next character for editing will
be flashing.
• Repeat steps 6 - 7 to store up to 10
characters.
8 To store the setting, press
PERSONAL again.
• Before storing the setting, you
can press
à
to retrace the
steps.
• To exit without storing the
setting, press Ç.
Notes:
– During personal setting, if no button is
pressed within 90 seconds, the system
will exit personal setting mode
automatically.
– It is not possible to adjust the DBB
level during personal setting, "USE
JOG" will be displayed.
DIGITAL SOUND CONTROL
(DSC)
The DSC feature enables you to adjust
the system to suit your type of music.
1 Press to select the DSC feature.
2 Adjust the JOG to select the
desired DSC setting : OPTIMAL,
CLASSIC, TECHNO, VOCAL, ROCK
or JAZZ.
™ The selected digital sound is
encircled.
™ "OPTIMAL, CLASSIC, TECHNO,
VOCAL, ROCK or JAZZ" will be
displayed.
Note:
– For a neutral setting, select CLASSIC.
DYNAMIC BASS BOOST (DBB)
There are three DBB settings to
enhance the bass response.
1 Press to select the DBB feature.
2 Adjust the JOG to select the
desired DBB level : BEAT, PUNCH or
BLAST.
™ The DBB LED will be lit.
™ “BEAT”, “PUNCH” or “BLAST” will
be displayed.
To switch off DBB
1 Press DBB briefly.
2 Adjust the JOG until “DBB OFF” is
displayed.
Note:
– Some CDs might be recorded in high
modulation, which causes a distortion
at high volume. If this occurs, switch off
DBB or reduce the volume.
Automatic DSC-DBB / VEC-DBB
selection
The best DBB setting is generated
automatically for each DSC or VEC
selection. You can manually select the DBB
setting that best suits your listening
environment.
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM17
3139 116 19774
18
English
DVD-VIDEO
General Information
• Digital video discs provide perfect
digital, studio-quality pictures; three
dimensional digital; multi-channel
audio; story sequences screened
from your choice of camera angle;
sound tracks in as many as eight
languages; and up to 32 subtitles if
available on disc.
• DVD-Video uses state-of-the-art
MPEG2 data compression
technology to register an entire
movie on the single 5-inch disc.
DVD's variable bitrate compression,
running up to 9.8 Mbits/second,
captures even the most complex
pictures in their original quality.
• The crystal-clear digital pictures have
a horizontal resolution of over 500
lines, with 720 pixels (picture
elements) to each line. This
resolution is more than double that
of VHS, superior to Laser Disc, and
entirely comparable with digital
masters made in recording studios.
• In addition to the DVD-Video discs,
you will be able to play all Video CDs
and Audio CDs (including finalized
CD Recordable and CD Rewritable).
DVD-Video
You will recognize
DVD-Video discs
by the logo
shown at right.
Depending on the material on the disc
(a movie, video clips, a drama series,
etc.) the disc may have one or more
Titles. Each Title may have one or more
Chapters. To make playback easy and
convenient, your player lets you select
Titles and Chapters.
TITLE 1 TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2 CHAPTER 3
DVD-VIDEO DISC
Video CD
You will recognize Video
CDs by the logo shown
at right. Depending on
the material on the disc
(a movie, video clips, a
drama series, etc.) the disc may have
one or more tracks. Tracks may have
one or more indexes, as indicated on
the disc case. To make playback easy
and convenient, your player lets you
select tracks and indexes.
INDEX 1 INDEX 2 INDEX 1 INDEX 2 INDEX 3
VIDEO CD
TRACK 1 TRACK 2
Audio CD
Audio CDs contain
music tracks only.
You will recognize CDs
by their logo which is
shown at right. You can play them in
conventional style through a stereo
system, using the keys on the remote
control and/or front panel, or via the TV
using the On-Screen Display (OSD).
23 56789101112...41
TRACKS
AUDIO CD
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM18
3139 116 19774
19
English
Surround Setup (for
DVD only)
Multichannel sound
MULTICHANNEL SOUND gives you a
completely new listening sensation. You
will have the feeling of being in the
middle of the action, because sound is
coming from everywhere around you.
Look for discs with the
mark which
indicates the material is encoded for
multichannel surround sound.
Notice that DVDs do not always carry
full multichannel surround. To be sure
that a disc is multichannel encoded,
consult your dealer.
Most ordinary DVDs can be replayed
using surround sound settings with
good results. If the reproduction is
distorted in surround mode, switch to
normal stereo mode.
The availability of the various surround
sound modes described depends on
the number of speakers used and the
incoming sound information.
Setting up the
Multichannel system
You must set up the system properly in
order to enjoy the MULTICHANNEL
to the fullest. First, connect the
speakers.
5-Speaker Connection
• Front speakers: Connect the front
speakers to the FRONT terminals.
• Center speaker: Connect the center
speaker to the CENTER terminals.
• Rear (surround) speakers: Connect
either the wired rear surround speakers
or a pair of wireless rear speakers (not
supplied) to the SURROUND OUT
terminals.
SURROUND FRONT
CENTER
REAR
RIGHT
FRONT
LEFT
FRONT
RIGHT
REAR
LEFT
REAR
DVD-VIDEO
R
E
T
U
R
N
P
E
R
S
O
N
A
L
V
E
C
D
S
C
D
B
B
STANDBY
ON
DVD MINI HIFI SYSTEM
DIM
PROG
POWER SAVE
IR SENSOR
RDS
/
CD TEXT
NEWS
/
T.A.
CLOCK/
TIMER
VOLUME
AXIS
OK
DVD
MENU
SOUND JOG
DVD JOG
PLAYBACK
MODE
DVD
VCD
CD
OPEN
/
CLOSE
MIC LEVEL
MIC
DVD / VCD / CD PLAYBACK
P3 P6P1 P2 P5P4
FTS TITLE CHAP. SLEEP
SLEEP
DIM TIMERLWFM A M W
TUNER
DVD
CD
AUX
A
-
B
P
B
C
FM•AM
VCD
•
CD
CD 1
•
2
•
3
CDR
LEFT CENTER RIGHT
SURR
SURR
STOP•CLEAR
SEARCH•TUNING
PLAY PAUSE
PREV NEXTSIDE
PRESET
▲
▲
S
C
A
N
CHANNEL
DVD
SURROUND CONTROL
5.1CH / STEREO / SURR / 3D
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM19
3139 116 19774
20
English
DVD-VIDEO
Positioning the Speakers
To get the best surround sound effect,
place the speakers as follows.
TV
CENTER
SPEAKER
SURROUND
RIGHT
SURROUND
LEFT
FRONT
LEFT
FRONT
RIGHT
MINI HIFI
SYSTEM
SUB-
WOOFER
Front Left and Right Speakers
For the best sound, place the Left and
Right speakers at an angle of
approximately 45 degrees to the
listener. If the speakers' magnetic field
affects the television picture, increase
the distance between the TV and the
speakers.
Center Speaker
For the best sound, place the center
speaker at the same height as the left
and right speakers. Place the center
speaker directly above or beneath the
television.
Rear (surround) Speakers
The surround speakers should be
placed at normal listening ear level or
mounted on the wall at the back of the
room. Most important, experiment
when placing the surround speakers in
order to obtain the best sound.
LEFT CENTER RIGHT
SURR
SURR
CHANNEL
LEFT CENTER RIGHT
SURR
SURR
CHANNEL
Switching Surround
Control Sound
You can switch through the different
surround modes. Note that the
possibilities are related to speaker setup
as defined.
• Press SURROUND CONTROL
(or SURR on the remote control) to
select : MULTICHANNEL, STEREO,
SURROUND or 3D SURROUND
mode.
™ The message “DOLBY DIGITAL
AC3 5.1 CHANNEL, STEREO,
SURROUND or 3D SURROUND”
will be displayed.
Multichannel (5.1)
In addition to
SURROUND, the
surround mode used will
be displayed. AC3 must be available on
the source material.
Stereo
All sound is reproduced
and played through the
front left and right
speakers. This enables standard stereo
reproduction.
Surround
This surround mode
enables normal surround
sound reproduction with
two speakers. Depending on the
source material, Dolby Pro Logic or
MPEG is reproduced (for connection to
another Dolby Pro Logic decoder).
3D Surround
The sound of the rear
channel is simulated by
the front left and right
speakers.
Note:
– Always refer to OSD when selecting
surround control sound. When in stop
mode, the player will not display the
correct surround selection.
LEFT CENTER RIGHT
SURR
SURR
CHANNEL
LEFT CENTER RIGHT
SURR
SURR
CHANNEL
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
Philips FW-D5D User manual
- Category
- Home audio sets
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI