Philips fw d 5 User manual

Brand: Philips

Model: fw d 5

Category: Home audio sets

Type: User manual

This manual is also suitable for

FW-D5D

3139 116 19771

Toll Free Help Line

Ligne d'assistance en service libre

Linea de ayuda telefónica sin cargo

800-531-0039

Mini Hi-Fi System

FW-

with DVD and 3 CD changer

pg 01-43/D5/37-Eng 7/13/00, 11:49 AM1

3139 116 19711

Return your Warranty Registration card today to

ensure you receive all the benefits you’re entitled to.

• Once your Philips purchase is registered,you’re eligible to receive

all the privileges of owning a Philips product.

• So complete and return the Warranty Registration Card enclosed

with your purchase at once.And take advantage of these

important benefits.

Warranty

Verification

Registering your product within 10 days

confirms your right to maximum protection

under the terms and conditions of your

Philips warranty.

Owner

Confirmation

Your completed Warranty Registration

Card serves as verification of ownership in

the event of product theft or loss.

Model

Registration

Returning your Warranty Registration Card

right away guarantees you’ll receive all

the information and special offers which you

qualify for as the owner of your model.

This “bolt of lightning” indicates uninsulated material

within your unit may cause an electrical shock. For the

safety of everyone in your household,please do not

remove product covering.

The “exclamation point” calls attention to features for

which you should read the enclosed literature closely to

prevent operating and maintenance problems.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN

OR MOISTURE.

CAUTION: To prevent electric shock,match wide

blade of plug to wide slot,and fully insert.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

For Customer Use

Enter below the Serial No.which is located on the

rear of the cabinet.Retain this information for

future reference.

Model No. _______________________________

Serial No. ________________________________

Know these

ssaaffeettyysymbols

MAC5097

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM2

3139 116 19771

Visit our World Wide Web Site at http://www.philipsusa.com

Thank you for your confidence in Philips.You’ve selected one

of the best-built,best-backed products available today.And

we’ll do everything in our power to keep you happy with

your purchase for many years to come.

As a member of the Philips “family,” you’re entitled to

protection by one of the most comprehensive warranties

and outstanding service networks in the industry.

What’s more, your purchase guarantees you’ll receive all

the information and special offers for which you qualify,

plus easy access to accessories from our convenient home

shopping network.

And most importantly you can count

on our uncompromising commitment to your total

satisfaction.

All of this is our way of saying welcome–and thanks for

investing in a Philips product.

Sincerely,

Robert Minkhorst

President and Chief Executive Officer

P.S.Remember,to get the most from your Philips

product,you must return your Warranty

Registration Card within 10 days. So please mail

it to us right now!

•

Hurry!

Congratulations on your purchase,

and welcome to the “family!”

Dear Philips product owner:

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM3

3139 116 19774

English

IMPORTANT SAFETY INSTRUCTIONS – Read before operating equipment

This product was designed and manufactured to meet

strict quality and safety standards. There are, however,

some installation and operation precautions which you

should be particularly aware of.

1. Read these instructions – All the safety and

operating instructions should be read before the

appliance is operated.

2. Keep these instructions – The safety and

operating instructions should be retained for

future reference.

3. Heed all warnings – All warnings on the

appliance and in the operating instructions should

be adhered to.

4. Follow all instructions – All operating and use

instructions should be followed.

5. Do not use this apparatus near water – for

example, near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement or near a

swimming pool, etc.

6. Clean only with a damp cloth. The appliance

should be cleaned only as recommended by the

manufacturer.

7. Install in accordance with the

manufacturers instructions. Do not block

any of the ventilation openings. For

example, the appliance should not be situated on

a bed, sofa, rug, or similar surface or placed in a

built-in installation, such as a bookcase or cabinet

that may impede the flow of air through the

ventilation openings.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9. Do not defeat the

safety purpose of

the polarized or

grounding-type plug.

A polarized plug has two blades with one wider

than the other. A grounding type plug has two

blades and a third grounding prong. The wide

blade or the third prong are provided for your

safety. When the provided plug does not fit into

your outlet, consult an electrician for replacement

of the obsolete outlet.

10. Protect the power cord from being walked

on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specified

by the manufacturer.

12. Use only with a cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving

the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

EL 4562-E004: 99/3

AC Polarized

Plug

This symbol warns the user that uninsulated voltage

within the unit may have sufficient magnitude to cause

electric shock. Therefore, it is dangerous to make

any kind of contact with any inside part of this unit.

This symbol alerts the user that important literature

concerning the operation and maintenance of this

unit has been included. Therefore, it should be read

carefully in order to avoid any problems.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

To reduce the risk of fire or electric shock, do

not expose this appliance to rain or moisture.

CAUTION

Use of controls or adjustments or

performance of procedures other than herein

may result in hazardous radiation exposure.

The set complies with the FCC-Rules, Part 15 and with

21 CFR 1040.10.

Canada

This digital apparatus does not exceed the Class B limits

for radio noise emissions from digital apparatus as set

out in the Radio Interference Regulations of the Canadian

Department of Communications.

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN. DO NOT STARE INTO BEAM.

DANGER

INVISIBLE LASER RADIATION WHEN OPEN.

AVOID DIRECT EXPOSURE TO BEAM.

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM4

EnglishFrançais

Español

3139 116 19xxx (ENG)

English ............................ 7

Français ........................ 47

Español ......................... 89

INDEX

CLASS 1

LASER PRODUCT

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM5

3139 116 19711

LASER SAFETY

This unit employs a laser. Only a qualified service

person should remove the cover or attempt to

service this device, due to possible eye injury.

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION

EXPOSURE.

NEVER MAKE OR CHANGE

CONNECTIONS WITH THE POWER

SWITCHED ON.

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPEN AVOID EXPOSURE TO BEAM (WARNING

LOCATION: INSIDE ON LASER COVERSHIELD)

The region code for this set is 1.

Since it is usual for DVD movies to be released at

different times in different regions of the world, all

players have region codes and discs can have an

optional region code. If you load a disc of a

different region code to your player, you will see the

region code notice on the screen. The disc will not

play, and should be unloaded.

For Customer Use:

Read carefully the information located at the

bottom of your DVD-VIDEO player and enter

below the Serial No. Retain this information for

future reference.

Model No. __________________________

Serial No. __________________________

Dolby Surround and the double-D symbol d are

trademarks of Dolby Laboratories Licensing

Corporation.

Manufactured under license from Dolby Laboratories

Licensing Corporation.

Manufactured under license from Dolby Laboratories.

“Dolby”, “AC-3” and the double-D symbol are

trademarks of Dolby Laboratories. Confidential

TruSurround and the SRS symbol are trademarks of

SRS Labs., Inc. TruSurround technology is manufactured

under license from SRS Labs., Inc.

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorized by Macrovision

Corporation, and is intented for home and other

limited viewing uses only unless otherwise authorized

by Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

LASER

Type Semiconductor laser GaAlAs

Wave length 650 nm (DVD)

785 nm (VCD/CD)

Output Power 7 mW (DVD)

10 mW (VCD/CD)

Beam divergence 60 degree.

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM6

3139 116 19774

English

General Information.......................................................... 8

Safety Information............................................................. 8

Preparation .................................................................9 - 11

Controls .....................................................................12 - 14

Operating The System ..............................................15 - 17

DVD-VIDEO ...............................................................18 - 32

CD ..............................................................................33 - 35

Tuner..........................................................................36 - 37

AUX/CDR.......................................................................... 37

Clock................................................................................. 38

Timer..........................................................................38 - 39

Sleep Timer ...................................................................... 39

Specifications ................................................................... 40

Maintenance .................................................................... 41

Troubleshooting.........................................................41 - 42

INDEX

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM7

3139 116 19774

English

General Information

• The typeplate (which contains

the serial number) is located at

the rear of the system.

• Recording is permissible if

parties are not infringed.

• This device complies with the

Federal Communications

Commission (FCC) rules, part 15

and with 21 CFR 1040.10.

Operation is subject to the

following two conditions:

– This device may not cause

harmful interference, and

– This device must accept any

interference received, including

interference that may cause

undesired operation.

Environmental

Information

All unnecessary packaging has been

omitted. We have tried to make the

packaging easy to separate into three

materials: cardboard (box), polystyrene

foam (buffer) and polyethylene (bags,

protective foam sheet).

Your system consists of materials which

can be recycled and reused if

disassembled by a specialized company.

Please observe the local regulations

regarding the disposal of packaging

materials, exhausted batteries and old

equipment.

Energy Star

As an ENERGY STAR

Partner, Philips

has determined that this product meets

the ENERGY STAR

guidelines for

energy efficiency.

Accessories (Supplied)

– Remote control

– Batteries (two AA size) for remote

control

– AM loop antenna

– FM wire antenna

– AC power cord

– CS-05 speaker package (includes one

pair of surround speakers and one

center speaker)

– CVBS cable cinch

GENERAL INFORMATION SAFETY INFORMATION

Safety Information

• Before operating the system, check

that the operating voltage indicated

on the typeplate (or the voltage

indication beside the voltage

selector) of your system is identical

with the voltage of your local power

supply. If not, please consult your

dealer. The typeplate is located at the

rear of your system.

• When the system is switched on, do

not move it around.

• Place the system on a solid base (e.g.

a cabinet).

• Place the system in a location with

adequate ventilation to prevent

internal heat build-up in your system.

Allow at least 10 cm (4 inches)

clearance from the rear and the top

of the unit and 5 cm (2 inches) from

each side.

• Do not place the system on soft

carpet that will cover the ventilation

hole at the bottom.

• The system incorporates a built-in

safety feature that prevents

overheating.

• Do not expose the system to

excessive moisture, rain, sand or heat

sources.

• Under no circumstances should you

repair the system yourself, as this will

invalidate the warranty!

• If the system is brought directly from

a cold to a warm location, or is

placed in a very damp room,

moisture may condense on the lens

of the CD/DVD unit inside the

system. Should this occur, the player

will not operate normally. Leave the

power on for about one hour with

no disc in the system until normal

playback is possible.

• Electrostatic discharge may cause

unexpected problems. See whether

these problems disappear if you

unplug the AC power cord and plug

it in again after a few seconds.

• To disconnect the system from

the power supply completely,

remove the AC power plug

from the wall socket.

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM8

3139 116 19774

English

PREPARATION

Rear Connections

AM ANTENNA

SUB-

WOOFER

OUT

LINE-OUT

AUDIO OUT

HIGH POWER SUBWOOFER

STANDBY ON

CUT OFF FREQUENCY

60Hz 150Hz

MIN MAX

AUDIO IN

MAINS

REAR

SURROUND

–

FRONT

–

surr.

SURROUND OUT

AUX/CDR-IN

S-VIDEO

OUT

(Y/C)

VIDEO OUT

(CVBS)

AUDIO

DIGITAL

OUT

surr.

FM ANTENNA 300Ω

CENTER

–

A AM Loop Antenna

Connection

Connect the supplied loop antenna to

the AM ANTENNA terminal. Place the

AM loop antenna far away from the

system and adjust its position for the

best reception.

B FM Wire Antenna

Connection

Connect the supplied FM wire antenna

to the FM ANTENNA 300 Ω terminal.

Adjust the position of the FM antenna

for the best reception.

Outdoor Antenna

For better FM stereo reception,

connect an outdoor FM antenna to the

FM ANTENNA 300 Ω terminal using a

300 Ω dipole wire.

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM9

3139 116 19774

English

PREPARATION

D Center Speaker

Connection

Connect the black (non-marked) wires

to the black CENTER terminal and the

blue (marked wires) to the blue

CENTER terminal.

E Rear Surround

Speakers’ Connection

Connect the black (non-marked) wires

to the black REAR SURROUND

terminals and the colored (marked)

wires to the grey REAR SURROUND

terminals.

F Subwoofer Out

Connection

Connect the optional active subwoofer

to the SUBWOOFER OUT terminal.

The subwoofer reproduces just the low

bass sound effect (e.g. explosions, the

rumble of spaceships, etc.). Be sure to

follow the instructions supplied with the

subwoofer.

C Speakers Connection

• Connect the right speaker to Front

terminal R, with the colored wire to

+ and the black wire to -.

• Connect the left speaker to Front

terminal L, with the colored wire to

+ and the black wire to -.

• Clip the stripped portion of the

speaker wire as shown.

lock

12 mm

unlock

CAUTION:

– For optimal sound performance, it is

recommended to use the supplied

speakers.

– Do not connect more than one speaker

to any one pair of +/- speaker

terminals.

– Do not connect speakers with

impedance lower than the speakers

supplied. Please refer to the

SPECIFICATIONS section of this

manual.

G Wireless Surround Out

Connection

You may connect the transmitter of the

wireless rear speakers (not supplied)

the SURROUND OUT terminal. Be

sure to follow the instructions supplied

with the wireless surround speakers.

Note:

– Availability of a wireless transmitter and

its peripherals are subjected to the

approval of local authorities. Please

check with the respective local safety

or approving authority.

H Line Out Connection

(wireless ready)

You can connect the audio left and right

LINE OUT terminals to a optional CD

Recorder's ANALOG IN terminals. This

allows you to record in an analog

format.

You can also install additional optional

front active speakers away from the

system (e.g. in another room) to reduce

the inconvenience of running long

speaker wires across rooms. You can

place as many remote speakers as you

like provided they operate at the same

radio frequency.

Connect the wireless radio frequency

transmitter to the LINE OUT terminals.

Place the active speakers at your

preferred location. Be sure to follow the

instructions supplied with the active

speakers.

I Connecting other

equipment to your

system

You can connect the audio left and right

OUT terminals of a TV, VCR, Laser Disc

player, DVD player or CD Recorder to

the AUX/CDR IN terminals at the rear

of the system.

J Video Out Connection

Connect the VIDEO OUT (CVBS)

terminal at the rear of the system to

the TV or VCR VIDEO IN terminal for

viewing or recording.

Note:

– You can also choose to connect the

S-VIDEO OUT (Y/C) terminal at the

rear of the system to the S-VIDEO IN

of the TV using an optional S-VIDEO

cable.

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM10

3139 116 19774

English

K Audio Digital Out

Connection

You can record the digital sound from

the CD/DVD, through this output, on

any audio equipment with digital input

(e.g. CD Recorder, Digital Audio Tape

(DAT) deck, Digital to Analog

Converter and Digital Signal Processor).

Connect one end of the cinch cable

(not supplied) to the DIGITAL OUT

socket and the other end to the audio

equipment's digital input. When

connecting the cinch cable, make sure it

is fully inserted.

L AC Power Supply

After all other connections have been

made, connect the AC power cord to

the system and to the wall outlet.

Inserting batteries into the

Remote Control

• Insert the batteries (Type R06 or

AA) into the remote control as

shown in the battery compartment.

• To avoid damage from possible

battery leakage, remove dead

batteries or batteries that will not be

used for a long time. For

replacement, use type R06 or AA

batteries.

PREPARATION

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM11

3139 116 19774

English

CONTROLS

DISC CHANGE

CD 1 CD 2 CD 3

OPEN•CLOSE

STANDBY

CHANGER

DVD MINI HIFI SYSTEM

DIM

PROG

POWER SAVE

IR SENSOR

RDS / CD TEXT

NEWS

/ T.A.

CLOCK/

TIMER

VOLUME

AXIS

DVD

SOUND JOG

DVD JOG

PLAYBACK

MODE

DVD

VCD

OPEN

MIC LEVEL

MIC

DVD / VCD / CD PLAYBACK

P3 P6P1 P2 P5P4

FTS TITLE CHAP. SLEEP

SLEEP

DIM TIMERLWFM A M W

TUNER

DVD

AUX

VOLUME

AUX/CDR

TV/AV

DVD

TUNER

SHUFFLEREPEAT

FTS

⁄

‹

(

‡

•

ﬁ

≤

∞

‚

DSC VEC DBB MUTE

›

FM•AM

VCD

• CD

CD 1

• 2 • 3

CDR

LEFT CENTER RIGHT

SURR

SURROUND CONTROL

STOP•CLEAR

SEARCH•TUNING

PLAY PAUSE

PREV NEXTSIDE

PRESET

▲

CHANNEL

5.1CH / STEREO / SURR / 3D

DVD

OSD

SURR.

PROG. A-B SLEEP TIMER

SUBTITLE ANGLE AUDIO ZOOM

STOP PLAY

•

≥

≤

(

)

ﬂ

™

∞

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM12

3139 116 19774

English

CONTROLS

Controls on the system

and remote control

1 STANDBY ON

– to switch the system on or to

standby mode.

– to use for EASY SET.

2 POWER SAVE

– to switch the system to energy

saving mode.

3 IR SENSOR

– sensor for the infrared remote

control.

4 SOURCE – to select the

following:

DVD / (VCD•CD)

– to select DVD mode. When in

DVD mode, you can play DVD,

VCD or CD.

CD / (CD 1•2•3)

– to select CD mode. When CD

playback is stopped, press to select

disc tray 1, 2 or 3.

TUNER / (FM•AM)

– to select Tuner mode. When in

tuner mode, press to select the

waveband: FM or AM.

AUX / (CDR)

– to select sound from an external

source (e.g. TV, VCR, Laser Disc

player, DVD player or CD

Recorder). When in AUX mode,

press to select either AUX or

CDR.

TV/AV (only on the remote control)

– to select TV or Video mode.

5 DISPLAY SCREEN

– to view the current setting of the

system.

6 CD CAROUSEL TRAY

7 DISC CHANGE

– to change CD(s).

8 OPEN•CLOSE

– to open or close the CD carousel

tray.

9 CD 1 / CD 2 / CD 3 (CD

DIRECT PLAY)

– to select a CD tray for playback.

0 SURROUND SOUND

DISPLAY PANEL

– to view the selected Surround

setting.

! SURROUND CONTROL

(SURR)

– to select Multichannel Sound,

Stereo, Surround or 3D Sound

mode (in DVD mode only).

@ MODE SELECTION

SEARCH•TUNING à á

(1 2)

for DVD/VCD/CD

– to search backward/forward

(except for CD playback in DVD

mode).

for TUNER

– to tune to a lower or higher

radio frequency.

for CLOCK (on the system only)

– to set the hour.

for TV VOL.

– to adjust the TV volume if the

remote operates your TV.

STOP•CLEAR Ç

for DVD/VCD/CD

– to stop playback (in DVD mode

only).

for CD

– to stop playback or to clear a

program (in CD mode only).

for TUNER

– to stop programming.

for DEMO (on the system only)

– to start or stop demonstration

mode.

PLAY PAUSE ÉÅ

for DVD/VCD/CD

– to start or interrupt playback.

for DVD/VCD

– to watch a still picture.

í PREV / NEXT ë

(PRESET)

for DVD/VCD/CD

– to skip to the beginning of the

current, previous, or next title or

track.

for VCD only

– to select next or previous

MENU (for VCD with PBC on).

– to select next or previous VCD

track during playback (for VCD

with PBC off).

for TUNER

– to select a preset radio station in

memory.

for CLOCK (on the system only)

– to set the minute .

# CLOCK/TIMER

– to view the clock, set the clock or

set the timer.

$ SOUND CONTROL

– to select the desired sound feature:

VEC, PERSONAL, DSC or DBB.

% SOUND JOG – to select the

desired sound effect of VEC/

PERSONAL/DSC/DBB setting. You

must select the respective sound

feature first.

VEC

– to select the desired Virtual

Environment Control effect : HALL,

CLUB, DISCO, CINEMA,

CONCERT or ARCADE.

PERSONAL

– to select up to 6 personal

preferred Spectrum Analyzer

settings : PERSONAL 1-6.

DSC

– to select the desired Digital Sound

Control effect : OPTIMAL,

CLASSIC, TECHNO, VOCAL,

ROCK or JAZZ.

DBB

– to select a Dynamic Bass Boost

level : BEAT, PUNCH or BLAST.

^ n

– to connect headphones.

& VOLUME

– to increase or decrease the

volume.

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM13

3139 116 19774

English

CONTROLS

* DIM

– to select brightness for the display

screen : DIM 1, DIM 2, DIM 3 or

DIM OFF.

( PROGram (FTS - Favorite

track selection)

for DVD/VCD/CD

– to program disc tracks.

for TUNER

– to program preset radio

stations.

for CLOCK (on the system only)

– to select 12 or 24 hour in clock

setting mode.

) DVD-VIDEO DISC TRAY

¡ OPEN/CLOSE 0

– to open or close the DVD-VIDEO

disc tray.

™ PLAYBACK MODE

– to view the selected playback

mode : DVD, VCD or CD.

£ DVD MENU

– to access the DVD disc menu.

≤ OK

– to confirm the selection.

∞ AXIS ( 1 2 3 4 )

– to select the direction of cursor

movement : up/down or left/right.

– (on the remote control only)

to select movement of cursor: left,

right, up or down.

§ DVD JOG

– to move the cursor up/down or

left/right. You must select the AXIS

movement direction first.

≥ SCAN

for DVD

– to playback the first 10 seconds

of each chapter within a title.

for VCD/CD

– to playback the first 10 seconds

of each track.

• A - B (in DVD mode only)

– to playback a certain scene or

passage of a disc repeatedly.

– to repeat playback a Chapter/Index,

Title/Track or Disc.

ª PBC (PLAYBACK CONTROL)

– to switch on or off PBC mode

(

for

VCD version 2.0 only)

º RETURN

– to return to the previous MENU

level during playback.

⁄ REPEAT (in CD mode only)

– to repeat a disc track, a disc, or all

available discs.

¤ OSD MENU (ON SCREEN

DISPLAY)

– to switch on or off the on screen

display on the TV screen.

‹ SUBTITLE

– to select different subtitle languages

available in the DVD disc.

› ANGLE

– to select a camera angle available in

the DVD disc.

ﬁ MUTE

– to switch off the sound temporarily.

ﬂ SLEEP

– to switch the system to standby

mode at a selected time.

‡ TIMER

– to switch on or off the timer.

° AUDIO

– to select different audio languages

available in the DVD disc.

· ZOOM

– to enlarge a still picture on the TV

screen.

‚ SHUFFLE

– to play all the available discs and

their tracks in random order.

DIGIT 0 – 9

(numbers consisting more than two

figures must be keyed in within two

seconds.)

for DVD/VCD/CD

– to key in a disc title or track for

playback or programming.

for VCD with PBC on only

– to select a track.

for TUNER

– to key in a preset radio station.

+ B

– to switch the system to standby

mode.

Notes for remote control:

– First select the source you wish

to control by pressing one of the

source select keys on the remote

control (e.g. DVD, TUNER, etc.).

– Then select the desired function

(

, etc.).

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM14

3139 116 19774

English

Important:

Before you operate the system,

complete the preparation

procedures.

Demonstration mode

The system has a demonstration mode

that shows the various features offered

by the system. When the system is

switched on for the first time, the

demonstration mode will start

automatically.

Notes:

– During the demonstration, if you press

any source (or standby-on) button, the

system will switch to the respective

mode (or standby).

– When the system is switched to standby

or power save mode, the demonstration

will resume five seconds later.

To stop the demonstration mode

• Press and hold Ç(on the system

only) for five seconds when the

system is in demonstration mode.

™ The demonstration will stop.

™ "DEMO OFF" will be displayed.

™ The system will switch to standby

mode.

OPERATING THE SYSTEM

Notes:

– When the system is switched on from

the main power outlet, the CD carousel

tray may open and close again to

initialize the set.

– Even though the AC power cord is

removed from and reconnected to the

wall socket, the demonstration will

remain off until it is switched on again.

To start the demonstration mode

• Press and hold Ç(on the system

only) for five seconds when the

system is in standby mode.

™ The demonstration will begin.

Easy Set

EASY SET allows you to store all

available radio stations automatically.

• Press and hold STANDBY ON (on

the system only) for five seconds

when the system is in standby or

demonstration mode.

™ "EASY SET" will be displayed, and

followed by "TUNER" and then

"AUTO".

™ EASY SET will search for all radio

stations on FM band and then

search for radio stations on AM

band.

™ All available radio stations with

sufficient signal strength will be

stored. Up to 40 presets may be

stored.

Notes:

– EASY SET will start with the FM band,

if there are still presets available, the

system will continue to store the AM

band.

– When EASY SET is used, all previously

stored radio stations will be replaced.

– The last preset radio station will

appear on the display when EASY SET

is completed.

Switching the system ON

• Press DVD, CD, TUNER or AUX.

You can also switch on the system by

pressing any one of the CD DIRECT

PLAY buttons.

Switching the system to

standby mode

• Press STANDBY ON or B on

the remote control.

™ The system will switch to standby

mode.

STANDBY

DVD MINI HIFI SYSTEM

DIM

PROG

POWER SAVE

IR SENSOR

RDS

CD TEXT

NEWS

T.A.

CLOCK/

TIMER

VOLUME

AXIS

DVD

SOUND JOG

DVD JOG

P3 P6P1 P2 P5P4

CHAP.

SLEEP DIM TIMERLWFM AMW

TUNER

DVD

AUX

FM•AM

VCD

•

CD 1

•

CDR

LEFT CENTER RIGHT

SURR

STOP•CLEAR

SEARCH•TUNING

PLAY PAUSE

PREV NEXTSIDE

PRESET

▲

CHANNEL

DVD

SURROUND CONTROL

5.1CH / STEREO / SURR / 3D

FTS

TITLE

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM15

3139 116 19774

English

Switching the system to

power save mode (when the

Demonstration is stopped)

• Press POWER SAVE to switch to

energy saving mode ( < 2 watts ).

™ "LOW POWER STANDBY ON" will

be displayed, after which the

display screen goes blank.

™ The low power STANDBY ON

LED will be lit.

Note:

– if the demonstration mode has not

been disabled, it will resume five

seconds later.

Selecting the Source

• Press the desired source selection

button: DVD, CD, TUNER or

AUX.

™ The display indicates the selected

source.

Note:

– For an external source, make sure you

have connected the audio left and right

OUT terminals of the external

equipment (TV, VCR, Laser Disc player,

DVD player or CD Recorder) to the

AUX/CDR IN terminals.

OPERATING THE SYSTEM

Dim mode

You can select the desired brightness

for the display.

• Press DIM to select DIM 1, DIM 2,

DIM 3 or DIM OFF display mode.

™ The DIM appears on the display.

™ "DIM 1", "DIM 2", "DIM 3" or

"DIM OFF" will be displayed

depending on the mode selected.

DIM OFF - normal brightness with

Spectrum Analyzer On

P3 P6P1 P2 P5P4

FTS TITLE CHAP. SLEEP

SLEEP

DIM TIMERLWFM A M W

DIM 1 - normal brightness with

Spectrum Analyzer Off

P3 P6P1 P2 P5P4

FTS TITLE CHAP. SLEEP

SLEEP

DIM TIMERLWFM A M W

DIM 2 - half brightness with

Spectrum Analyzer On

P3 P6P1 P2 P5P4

FTS TITLE CHAP. SLEEP

SLEEP

DIM TIMERLWFM A M W

DIM 3 - half brightness with

Spectrum Analyzer Off and all LEDs

on the system will be switched off.

P3 P6P1 P2 P5P4

FTS TITLE CHAP. SLEEP

SLEEP

DIM TIMERLWFM A M W

Volume Control

Adjust VOLUME to increase or

decrease the sound level.

For Personal Listening

Connect the headphones plug to the

n socket at the front of the system.

The speakers will be muted.

MUTE (on remote control only)

This feature allows you to temporarily

switch off the sound without switching

off the system when you require a

moment of silence.

1 Press MUTE on the remote control

to switch off the sound.

™ "MUTE" will be displayed.

2 Press MUTE again on the remote

control or increase the VOLUME

level to switch on the sound.

Sound Control

For Optimal sound listening, you

can only select one of the following

sound controls at a time : VEC,

PERSONAL or DSC.

VIRTUAL ENVIRONMENT

CONTROL (VEC)

The VEC feature enables you to adjust

the system to select a type of

environment.

1 Press to select the VEC feature.

2 Adjust the JOG to select the desired

VEC setting : HALL, CLUB, DISCO,

CINEMA, CONCERT or ARCADE.

™ The selected environment is

encircled.

™ "HALL, CLUB, DISCO, CINEMA,

CONCERT or ARCADE" will be

displayed.

PERSONAL SOUND

You can store up to 6 personal settings.

1 Press to select the PERSONAL

feature.

2 Adjust the JOG to select the desired

Personal setting.

™ The selected personal setting

number will appear on the display.

™ If no name has been stored

previously, "PERSONAL X" will be

displayed. "X" is the setting

number.

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM16

3139 116 19774

English

OPERATING THE SYSTEM

Personal Setting

You can adjust the personal setting to

your desired level with the JOG control.

1 Press and hold PERSONAL for

about five seconds to switch on the

personal setting mode.

™ "SELECT PRESET NUMBER" will

be displayed.

2 Adjust the JOG to select the desired

preset number for personal setting

and press á to confirm the

selection.

™ "ADAPT LOW FREQ LEVEL" will

be displayed.

3 Adjust the JOG to select the desired

Spectrum Analyzer band level for

low frequency.

™ The level will increase or decrease

between+3 and -3.

4 Press á to confirm the selection.

™ "ADAPT MID FREQ LEVEL" will

be displayed, followed by "ADAPT

HIGH FREQ LEVEL".

• Repeat step 3 - 4 to select the

desired middle and high frequencies

of the Spectrum Analyzer band levels.

5 You can edit the name for the

personal setting.

™ The first character of the setting

name will be flashing.

6 Adjust the JOG to select the desired

letter, number or symbol.

™ "A to Z", "0 to 9" or "*, -, +, \, /, _".

7 Press á to confirm the selection.

™ The next character for editing will

be flashing.

• Repeat steps 6 - 7 to store up to 10

characters.

8 To store the setting, press

PERSONAL again.

• Before storing the setting, you

can press

to retrace the

steps.

• To exit without storing the

setting, press Ç.

Notes:

– During personal setting, if no button is

pressed within 90 seconds, the system

will exit personal setting mode

automatically.

– It is not possible to adjust the DBB

level during personal setting, "USE

JOG" will be displayed.

DIGITAL SOUND CONTROL

(DSC)

The DSC feature enables you to adjust

the system to suit your type of music.

1 Press to select the DSC feature.

2 Adjust the JOG to select the

desired DSC setting : OPTIMAL,

CLASSIC, TECHNO, VOCAL, ROCK

or JAZZ.

™ The selected digital sound is

encircled.

™ "OPTIMAL, CLASSIC, TECHNO,

VOCAL, ROCK or JAZZ" will be

displayed.

Note:

– For a neutral setting, select CLASSIC.

DYNAMIC BASS BOOST (DBB)

There are three DBB settings to

enhance the bass response.

1 Press to select the DBB feature.

2 Adjust the JOG to select the

desired DBB level : BEAT, PUNCH or

BLAST.

™ The DBB LED will be lit.

™ “BEAT”, “PUNCH” or “BLAST” will

be displayed.

To switch off DBB

1 Press DBB briefly.

2 Adjust the JOG until “DBB OFF” is

displayed.

Note:

– Some CDs might be recorded in high

modulation, which causes a distortion

at high volume. If this occurs, switch off

DBB or reduce the volume.

Automatic DSC-DBB / VEC-DBB

selection

The best DBB setting is generated

automatically for each DSC or VEC

selection. You can manually select the DBB

setting that best suits your listening

environment.

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM17

3139 116 19774

English

DVD-VIDEO

General Information

• Digital video discs provide perfect

digital, studio-quality pictures; three

dimensional digital; multi-channel

audio; story sequences screened

from your choice of camera angle;

sound tracks in as many as eight

languages; and up to 32 subtitles if

available on disc.

• DVD-Video uses state-of-the-art

MPEG2 data compression

technology to register an entire

movie on the single 5-inch disc.

DVD's variable bitrate compression,

running up to 9.8 Mbits/second,

captures even the most complex

pictures in their original quality.

• The crystal-clear digital pictures have

a horizontal resolution of over 500

lines, with 720 pixels (picture

elements) to each line. This

resolution is more than double that

of VHS, superior to Laser Disc, and

entirely comparable with digital

masters made in recording studios.

• In addition to the DVD-Video discs,

you will be able to play all Video CDs

and Audio CDs (including finalized

CD Recordable and CD Rewritable).

DVD-Video

You will recognize

DVD-Video discs

by the logo

shown at right.

Depending on the material on the disc

(a movie, video clips, a drama series,

etc.) the disc may have one or more

Titles. Each Title may have one or more

Chapters. To make playback easy and

convenient, your player lets you select

Titles and Chapters.

TITLE 1 TITLE 2

CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2 CHAPTER 3

DVD-VIDEO DISC

Video CD

You will recognize Video

CDs by the logo shown

at right. Depending on

the material on the disc

(a movie, video clips, a

drama series, etc.) the disc may have

one or more tracks. Tracks may have

one or more indexes, as indicated on

the disc case. To make playback easy

and convenient, your player lets you

select tracks and indexes.

INDEX 1 INDEX 2 INDEX 1 INDEX 2 INDEX 3

VIDEO CD

TRACK 1 TRACK 2

Audio CD

Audio CDs contain

music tracks only.

You will recognize CDs

by their logo which is

shown at right. You can play them in

conventional style through a stereo

system, using the keys on the remote

control and/or front panel, or via the TV

using the On-Screen Display (OSD).

23 56789101112...41

TRACKS

AUDIO CD

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM18

3139 116 19774

English

Surround Setup (for

DVD only)

Multichannel sound

MULTICHANNEL SOUND gives you a

completely new listening sensation. You

will have the feeling of being in the

middle of the action, because sound is

coming from everywhere around you.

Look for discs with the

mark which

indicates the material is encoded for

multichannel surround sound.

Notice that DVDs do not always carry

full multichannel surround. To be sure

that a disc is multichannel encoded,

consult your dealer.

Most ordinary DVDs can be replayed

using surround sound settings with

good results. If the reproduction is

distorted in surround mode, switch to

normal stereo mode.

The availability of the various surround

sound modes described depends on

the number of speakers used and the

incoming sound information.

Setting up the

Multichannel system

You must set up the system properly in

order to enjoy the MULTICHANNEL

to the fullest. First, connect the

speakers.

5-Speaker Connection

• Front speakers: Connect the front

speakers to the FRONT terminals.

• Center speaker: Connect the center

speaker to the CENTER terminals.

• Rear (surround) speakers: Connect

either the wired rear surround speakers

or a pair of wireless rear speakers (not

supplied) to the SURROUND OUT

terminals.

SURROUND FRONT

CENTER

REAR

RIGHT

FRONT

LEFT

FRONT

RIGHT

REAR

LEFT

REAR

DVD-VIDEO

STANDBY

DVD MINI HIFI SYSTEM

DIM

PROG

POWER SAVE

IR SENSOR

RDS

CD TEXT

NEWS

T.A.

CLOCK/

TIMER

VOLUME

AXIS

DVD

SOUND JOG

DVD JOG

PLAYBACK

MODE

DVD

VCD

OPEN

MIC LEVEL

MIC

DVD / VCD / CD PLAYBACK

P3 P6P1 P2 P5P4

FTS TITLE CHAP. SLEEP

SLEEP

DIM TIMERLWFM A M W

TUNER

DVD

AUX

FM•AM

VCD

•

CD 1

•

CDR

LEFT CENTER RIGHT

SURR

STOP•CLEAR

SEARCH•TUNING

PLAY PAUSE

PREV NEXTSIDE

PRESET

▲

CHANNEL

DVD

SURROUND CONTROL

5.1CH / STEREO / SURR / 3D

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM19

3139 116 19774

English

DVD-VIDEO

Positioning the Speakers

To get the best surround sound effect,

place the speakers as follows.

CENTER

SPEAKER

SURROUND

RIGHT

SURROUND

LEFT

FRONT

LEFT

FRONT

RIGHT

MINI HIFI

SYSTEM

SUB-

WOOFER

Front Left and Right Speakers

For the best sound, place the Left and

Right speakers at an angle of

approximately 45 degrees to the

listener. If the speakers' magnetic field

affects the television picture, increase

the distance between the TV and the

speakers.

Center Speaker

For the best sound, place the center

speaker at the same height as the left

and right speakers. Place the center

speaker directly above or beneath the

television.

Rear (surround) Speakers

The surround speakers should be

placed at normal listening ear level or

mounted on the wall at the back of the

room. Most important, experiment

when placing the surround speakers in

order to obtain the best sound.

LEFT CENTER RIGHT

SURR

CHANNEL

LEFT CENTER RIGHT

SURR

CHANNEL

Switching Surround

Control Sound

You can switch through the different

surround modes. Note that the

possibilities are related to speaker setup

as defined.

• Press SURROUND CONTROL

(or SURR on the remote control) to

select : MULTICHANNEL, STEREO,

SURROUND or 3D SURROUND

mode.

™ The message “DOLBY DIGITAL

AC3 5.1 CHANNEL, STEREO,

SURROUND or 3D SURROUND”

will be displayed.

Multichannel (5.1)

In addition to

SURROUND, the

surround mode used will

be displayed. AC3 must be available on

the source material.

Stereo

All sound is reproduced

and played through the

front left and right

speakers. This enables standard stereo

reproduction.

Surround

This surround mode

enables normal surround

sound reproduction with

two speakers. Depending on the

source material, Dolby Pro Logic or

MPEG is reproduced (for connection to

another Dolby Pro Logic decoder).

3D Surround

The sound of the rear

channel is simulated by

the front left and right

speakers.

Note:

– Always refer to OSD when selecting

surround control sound. When in stop

mode, the player will not display the

correct surround selection.

LEFT CENTER RIGHT

SURR

CHANNEL

LEFT CENTER RIGHT

SURR

CHANNEL

pg 01-43/D5/37-Eng 7/13/00, 11:50 AM20

Page is loading ...

Philips fw d 5 User manual

Brand: Philips

Model: fw d 5

Category: Home audio sets

Type: User manual

This manual is also suitable for

FW-D5D

Download PDF

report

Philips fw d 5 User manual

This manual is also suitable for

Philips fw d 5 User manual

Related papers

Other documents