American Standard 6028.210.068 Installation guide

Type
Installation guide

This manual is also suitable for

American Standard 6028.210.068, a stylish and durable robe hook, offers a convenient solution for hanging your bathrobe, towel, or other items in your bathroom or cloakroom. Constructed from high-quality materials, it ensures long-lasting performance and can withstand everyday use. The robe hook comes with all the necessary mounting hardware, making installation a breeze. Whether you're looking to add a touch of sophistication to your bathroom décor or simply need a functional hook for your belongings, the American Standard 6028.210.068 is an excellent choice.

American Standard 6028.210.068, a stylish and durable robe hook, offers a convenient solution for hanging your bathrobe, towel, or other items in your bathroom or cloakroom. Constructed from high-quality materials, it ensures long-lasting performance and can withstand everyday use. The robe hook comes with all the necessary mounting hardware, making installation a breeze. Whether you're looking to add a touch of sophistication to your bathroom décor or simply need a functional hook for your belongings, the American Standard 6028.210.068 is an excellent choice.

1
The TOWEL RING, SOAP DISH,TUMBLER WITH TOOTHBRUSH HOLDER and ROBE HOOK work best if secured to a wall stud
or cross brace within the wall, using the SCREWS (2) supplied.
If the TOWEL RING, SOAP DISH,TUMBLER WITH TOOTHBRUSH HOLDER and ROBE HOOK are to be installed on a tile or plaster
wall the DRYWALL ANCHORS or TILE ANCHORS and SCREWS should be used.
Secure MOUNTING BRACKET (1) to wall with SCREWS (2).
'PSJOTUBMMBUJPOTPOUJMFEXBMMTIf TILE ANCHORS (4) and SCREWS (2) are use for securing MOUNTING BRACKET (1), then
drill two 1/4" diameter holes a minimum of 1-1/4" deep. Insert the two TILE ANCHORS (4) flush with face of the finished wall.
Determine desired height and location (optional) and mark a center line. Using the MOUNTING BRACKET (1) as a template mark the two
spots for the mounting holes. If MOUNTING BRACKET (1) is secured to a stud or cross brace drill small pilot holes for SCREWS (2).
'PSJOTUBMMBUJPOTPOESZXBMM use DRYWALL ANCHORS (3) and SCREWS (2) for securing MOUNTING BRACKET (1) to wall. Place #2 Phillips
screwdriver or cordless screwdriver into recess of anchor. Press into drywall while turning the anchor clockwise until it is seated flush with
the wall. Place MOUNTING BRACKET (1) over DRYWALL ANCHORS (3) and insert screws provided with #2 Phillips screwdriver. See
illustration below. Secure MOUNTING BRACKET (1) to wall with SCREWS (2).
Certified to comply with ANSI A112.18.1
M968859 REV.1.1
TOWEL RING, SOAP DISH, TUMBLER WITH TOOTHBRUSH HOLDER and ROBE HOOK
MOUNTING BRACKET INSTALLATION
ACCESSORIES
Installation
Instructions
6094
6095
6096
6097
6028.190
6028.150
6028.160
6028.210
5IBOLZPVGPSTFMFDUJOH"NFSJDBO4UBOEBSEUIFCFODINBSL
PGGJOFRVBMJUZGPSPWFSZFBST
5PFOTVSFUIBUZPVSJOTUBMMBUJPOQSPDFFETTNPPUIMZQMFBTF
SFBEJOTUSVDUJPOTDBSFGVMMZCFGPSFZPVCFHJO
TOWEL RING
SOAP DISH
TUMBLER WITH TOOTHBRUSH HOLDER
ROBE HOOK
Regular Screwdriver
Recommended Tools
Phillips Screwdriver
Drill
10'
Tape Measure
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR
WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID,
POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.
1
FINISHED WALL
2
3
4
DRILL PILOT HOLE FOR
WOOD SCREW (1) OR
1/4" DIA. HOLE FOR
ANCHOR (4)
CENTER LINE
OPTIONAL TO
FINISHED FLOOR
CENTER LINE
1
3
4
1
2
SLOT
M968859 REV.1.1
TOWEL RING AND ROBE HOOK INSTALLATION
Align accessory and place ESCUTCHEON (1) onto MOUNTING BRACKET (2). Secure accesory with SET SCREW (3)
using 2.5mm HEX WRENCH (4) supplied.
SOAP DISH AND TUMBLER WITH TOOTHBRUSH HOLDER INSTALLATION
Align accessory and place ESCUTCHEON (1) onto MOUNTING BRACKET (2). Secure accessory with SET SCREW (3)
using 2.5mm HEX WRENCH (4) supplied.
2
1
3
3
1
1
FOR SOAP DISH: Place SOAP DISH (5) into TRAY (6).
FOR TOOTH BRUSH HOLDER with TUMBLER: Place TOOTHBRUSH HOLDER (7) into TRAY (8)
and TUMBLER (9) into TOOTH BRUSH HOLDER (7) recess.
4
3
5
6
9
7
8
4
3
4
2
1
3
1
1
2
FINISHED WALL
2
FINISHED WALL
2
M968859 REV.1.1
ROBE HOOK
TOWEL RING
ACCESSORIES
TOWEL RING
SOAP DISH
TUMBLER / TOOTHBRUSH HOLDER
ROBE HOOK
CHROME
BRUSHED BRASS
SATIN
002
275
295
Replace the "YYY" with
appropriate finish code
MODEL NUMBERS
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1-800 442-1902
Weekdays 8:00 a.m. to 8:00 p.m. EST
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
Product names listed herein are trademarks of American Standard Inc.
© American Standard Inc. 2005
SOAP DISH
TUMBLER WITH
TOOTHBRUSH
HOLDER
M962433-0070A
MOUNTING KIT
M922297-0070A
TUMBLER
M922296-0070A
TOOTHBRUSH HOLDER
M962435-YYY0A
TOWEL RING
M962434-YYY0A
ROBE HOOK
M922295-0070A
GLASS SOAP ISH
M962433-0070A
MOUNTING KIT
M962433-0070A
MOUNTING KIT
M962436-YYY0A
HOLDER ASSEMBLY
M962436-YYY0A
HOLDER ASSEMBLY
M962433-0070A
MOUNTING KIT
IN MEXICO 01-800-839-12-00
6094
6095
6096
6097
6028.190
6028.150
6028.160
6028.210
  • Page 1 1
  • Page 2 2
  • Page 3 3

American Standard 6028.210.068 Installation guide

Type
Installation guide
This manual is also suitable for

American Standard 6028.210.068, a stylish and durable robe hook, offers a convenient solution for hanging your bathrobe, towel, or other items in your bathroom or cloakroom. Constructed from high-quality materials, it ensures long-lasting performance and can withstand everyday use. The robe hook comes with all the necessary mounting hardware, making installation a breeze. Whether you're looking to add a touch of sophistication to your bathroom décor or simply need a functional hook for your belongings, the American Standard 6028.210.068 is an excellent choice.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI