American Standard 2384.010 User manual

Type
User manual
K69
Revised 2/08
© 2008 AS America Inc.
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
CADET
®
3 ROUND FRONT 10"
ROUGH-IN TOILET
VITREOUS CHINA
CADET
®
3 ROUND FRONT 10"
ROUGH-IN TOILET
2384.010
Vitreous china
Low-consumption (6.0 Lpf/1.6 gpf)
EverClean
®
surface inhibits the growth of
stain- and odor-causing bacteria, mold,
and mildew on the surface
Features the Cadet
®
3 Flushing System
Space saving round front siphon action
jetted bowl
Fully-glazed 2-1/8" trapway with 2" ball pass
Generous 9" x 8" water surface area
Close-coupled tank with at tank cover for
superior storage
Oversized 3" ush valve with chemical
resistant apper
Chrome trip lever
Speed Connect
®
tank-to-bowl
coupling system
Sanitary dam on bowl with four point
tank stabilization
2 color-matched bolt caps
100% factory ush tested
• 5 year warranty
3011.016 Round Front Bowl
4019.016 Tank
Nominal Dimensions:
667 x 432 x 740mm
(26-1/4" x 17" x 29-1/8")
Fixture only, seat and supply by others
Alternative Tank Congurations Available:
4019.600 Tank complete with tank cover
locking device
4019.800 Tank complete with trip lever
on right side
4019.900 Tank complete with tank cover
locking device and trip lever on right side
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specication for
Non-Adjustability
To Be Specied:
Color: White Bone Silver Linen Black
Seat: #5330.010 Round front Champion
®
Slow Close
solid plastic seat and cover with easy lift off feature
Seat: #5282.011 Round Front EverClean
®
solid plas-
tic seat and cover
Seat: #5320.110 EverClean
®
Round Front Seat with
Slow Close Snap-Off Hinges
Supply with stop:
SEE REVERSE FOR ADDITIONAL ROUGHING-IN
DIMENSIONS
K70
Revised 2/08
© 2008 AS America Inc.
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
SUPPLY
AS
REQ'D.
184mm
(7-1/4)
667mm
(26-1/4)
19mm ± 6mm
(3/4 ± 1/4)
64mm
(2-1/2)
416mm
(16-3/8)
432mm
(17)
740mm
(29-1/8)
*381mm
(15)
*203mm
(8)
254mm
(10)
337mm
(13-1/4)
216mm
(8-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
356mm
(14)
*152mm
(6)
244mm
(9-5/8)
CADET
®
3 ROUND FRONT 10"
ROUGH-IN TOILET
VITREOUS CHINA
  • Page 1 1
  • Page 2 2

American Standard 2384.010 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI