Extron CTU RJ-45 Die Owner's manual

Universal Crimp Tool Die Installation Guide

68-2658-01

Rev. A

06 14

Slide the replacement

dies into the crimp tool.

Replace the top and

bottom screws to

secure dies in place.

Carefully close the

crimp tool to hold

the dies in place.

Slide the top and

bottom dies out of

the crimp tool.

Remove the top

and bottom screws

that hold the dies

in the crimp tool.

Keep the dies together

while inserting them

into the crimp tool.

NOTE:

Installing Replacement Dies

Removing the Dies

Extron Universal Crimp Tool dies can be easily installed or replaced into an Extron crimp tool as

shown in the instructions below.

This manual is also suitable for