2. Extron
  3. CTU 45

Extron CTU 45, CTU RJ-45 Die Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Extron CTU 45 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Universal Crimp Tool Die Installation Guide
68-2658-01
Rev. A
06 14
1
3
2
Slide the replacement
dies into the crimp tool.
Replace the top and
bottom screws to
secure dies in place.
Carefully close the
crimp tool to hold
the dies in place.
1
2
Slide the top and
bottom dies out of
the crimp tool.
Remove the top
and bottom screws
that hold the dies
in the crimp tool.
Keep the dies together
while inserting them
into the crimp tool.
NOTE:
Installing Replacement Dies
© 2014 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
Removing the Dies
Extron Universal Crimp Tool dies can be easily installed or replaced into an Extron crimp tool as
shown in the instructions below.
© 2014 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
/