Samsung Omnia
ICON
Windows Mobile 6.5 Online Update Procedure**
** IMPORTANT NOTES
1) Please backup all personal data stored on your Omnia
ICON
(Contacts, Calendar, SMS, Email, Photos,
Audio, Video, Documents and any other personal data and files) to a PC/External Storage as the
phone memory will be formatted during the upgrade.
2) This instruction is applicable for commercially purchased devices only. Demo devices or devices
purchased outside Australia are excluded from the instructions on this document.
3) This instruction is applicable to Windows 2000 (SP4), Windows XP (SP2), Windows Vista and
Windows 7 only.
Currently, a MAC version of the online update is unavailable.
Currently, 64-bit operating systems are not supported.
4) System Requirements
CPU: Pentium 600MHz or Higher
RAM: 512MB or higher
HDD: 200MB or more available hard disk space
USB Port
Microsoft DirectX 9.0 or higher
5) The update tool requires a direct connection to the Internet – you may need to configure your
Firewall or Antivirus software to allow this.
6) Samsung Australia offer existing Omnia
ICON
customers a free online update to WM6.5 firmware.
Please note that data charges may be incurred during the NPS and software download process
depending on the data plan with your Internet provider. E.g. the typical WM6.5 firmware will be
greater than 400MB.
7) While Samsung Electronics Australia Pty Ltd ACN 002 915 648 (“Samsung”) makes every effort to
deliver high quality products, we do not guarantee that our products are free from defects. This
software upgrade is provided to you “as is", and you use the software upgrade at your own
risk. Samsung makes no warranties as to the performance, merchantability, fitness for a particular
purpose, or any other warranties whether expressed or implied. No oral or written communication
from, or information provided by, Samsung shall create a warranty. In no event shall Samsung be
liable for any general, consequential, incidental, indirect, special, loss of profit or opportunity,
exemplary, punitive, special or other damages whatsoever resulting from resulting from the use,
misuse, or inability to use this software upgrade, whether due to breach of contract, breach of
warranty, strict liability, product liability, the negligence of Samsung or otherwise. No provision of
this disclaimer purports to restrict or modify or have the effect of excluding, restricting or modifying
the application any conditions and warranties imposed and required to be binding by statute.
The below instructions will help you update your Omnia
ICON
from Windows Mobile 6.1 to Windows Mobile 6.5.
Please follow all steps below carefully as they are vital for a successful upgrade.
1. PC Software installation
1) Download and Install Active Sync on your PC
http://au.samsungmobile.com/mobile-phones/samsung-omnia-icon-support
→ Software → Download
Note: It may be necessary to uninstall older versions of Active Sync prior to installing the latest
version.
2) Download and Install New PC Studio on your PC
http://au.samsungmobile.com/support/softwaremanuals/newPCStudio.do
Note: You may already have an acquired and installed an earlier version of New PC Studio
via the CD in the commercial box at the time of purchase. If so, please uninstall the earlier
version and install the current version available via the link above.
3) Restart your PC for all changes to be applied
4) Run New PC Studio. Select Menu > Update New PC Studio to check if the latest version is
installed. If a new version exists, please update New PC Studio.
2. Handset Settings
1) Ensure that the handset battery is fully charged
2) SIM card must be inserted in the handset
3) ‘USB connection’ option must be set to ‘ActiveSync’ mode
(Main Menu → Settings → General Settings → USB connection → select ‘ActiveSync’)
3. Firmware Upgrade
1) Turn on your handset (enter the SIM PIN if required)
2) Run ‘New PC Studio’ and connect your handset to the PC using a USB cable. The handset will be
detected. You can close any active sync dialog boxes that may pop up.
3) A notification message for firmware upgrade will now be seen (see figure below).
4) Select the ‘Upgrade Mobile Phone’ icon and then select the ‘Upgrade’ button
5) Please read the steps carefully, then check ‘I Agree to the given statement’ then
select ‘OK’
6) Select an option ‘Backup’ or ‘No Backup’ then select ‘Next’
7) The upgrade tool will now start downloading the software from the Samsung
server. Once downloaded, an upgrade of the handset will occur.
IMPORTANT: Please do not unplug your device during this process.
8) After the upgrade is successful, the handset will power OFF and power back ON
(this will take a few minutes).
9) At the “Tap the screen to set up your Windows phone” screen, the device will
reboot one more time to complete the factory reset/configuration.
10) You can now use your handset again.
------------- End of Document -------------
-
1
-
2
-
3
-
4
-
5
Samsung GT-I8000/M16 Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Samsung SGH-I900V User manual
-
-
Samsung Omnia Verizon Wireless User manual
-
Samsung Omnia II Verizon Wireless User manual
-
-
-
-
-
-
