mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, ie. if a child attempts
to climb on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall.
We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The
fixing device provided should fit most wall types, but please note
that dierent wall materials may require dierent fixing devices from
those supplied.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A B CD
E F
79x 79x 18x 40x
6x 6x
HARDWARE SUPPLIED
G H
IJ
12x 12x
2x 2x
K
2x
L
CL CR DL DR
2x
nutbolt dowel 4”35 screw
spacerclip bracket 3”14 screw
4”12 screwwall anchor 4”35 screw wall plug
6x 6x 6x 6x
slideslide
M
96x
3.5”12 screw slide slide
Avoca
Six Drawer
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
Avoca
Six Drawer
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
1 2
Attach 12 x bolts (A), 24 x screws (M), 3 x left rails (CL) and 3 x right
rails (CR) to panels [2] and [3] as shown. Tighten with a screwdriver.
Attach 3 x left rails (CL), 3 x right rails (CR), 8 x bolts (A), 16 x screws
(M) to panels [4] as shown. Tighten with a screwdriver.
A
CL CR
MMM
M
CL CR
A
A
A
A
A
MMM
M
Avoca
Six Drawer
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
3 4
Attach 9 x bolts (A), 2 x clips (E) and 2 x wall anchor {I} to panel [1] ,
and 4x clip (E) to panel [6] and secure with 12 x screws (M) and 2x screw {J}.
Tighten with a screwdriver.
Attach 50 x bolts (A) to panels [10], {8}, {5} and {11}. Tighten with a screwdriver.
I
J
E
Big
Small
M
E
BACK!
E
E
I
J
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
E
F
Avoca
Six Drawer
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
5 6
Attach panels [2], [4] and [6] together as shown and secure with 8 x
nuts (B) . Tighten with a screwdriver.
Attach panel (7) to assembled frame as shown and secure with 2 x
nuts (B) Tighten with a screwdriver.
B
B
B
B
B
Avoca
Six Drawer
B
B
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
7 8
Secure with 1 x screw (D) as shown. Tighten with a screwdriver. Attach panels [3], [6] and assembled frame together as shown and secure with
10 x nuts (B) . Tighten with a screwdriver.
D
B
B
B
B
B
Avoca
Six Drawer
B
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
9
Slide panel {18} into position as shown.
10
Attach panel [5] to assembled frame together as shown and secure with 9 x
screws (D) and 6 x dowels {C} . Tighten with a screwdriver.
D
C
C
C
C
C
C
D
D
D
D
D
Avoca
Six Drawer
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
11 12
Attach panels [8], [9] together and secure with 8 x nuts (B) and 6 x dowels {C} .
Attach panels [8], [9] and assembled frame together as shown and secure with
14 x nuts (B) . Tighten with a screwdriver.
Slide panel {17} into position as shown.
180
Avoca
Six Drawer
B
B
B
C
C
C
C
C
C
B
B
B
B
B
B
B
B
B
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
13
Attach panel [1] to assembled frame together as shown and secure with 9 x
nuts (B) and 6 x dowels {C} . Tighten with a screwdriver.
14
Attach 12 x brackets (G) to furniture and secure with 12 x screws (H).
Tighten with a screwdriver.
H
G
x12
G
C
C
C
B
B
B
B
B
B
C
C
C
G
G
G
G
G
G
G
Avoca
Six Drawer
B
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
15
Attach panels [12], [13], [14] and panel {15} together as shown, secure with 30 x
screws {D}.
Tighten with a screwdriver. Slide panel [16] into position as shown.
16
Attach panel {10} and {11} to assembled Drawerr together as shown and secure
with 30 x nuts (B) . Tighten with a screwdriver.
Avoca
Six Drawer
X6
X6
X3 X3
D
D
B
B
B
B
B
B
D
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
17
Attach 36 x screws (M), 6 x left rails (DL) and 6 x right
rails (DR) to assembled Drawerrs as shown. Tighten with a screwdriver.
18
Once assembled lift furniture into place, do not drag.
Fasten to wall using 2 x wall plug (L), 2 x wall screws (K) . Tighten with a
screwdriver.
M M M MMM
DL
DR
Big
Small
X3 X3
I
I
I
K
L
x2
Avoca
Six Drawer
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
19
Slide assembled Drawers into position as shown.
20
You’re done, enjoy!
Avoca
Six Drawer
/
