Urbanworx UX1WC User manual

Type
User manual
SPECIFICATION
INPUT: 9VDC, 2A or 5VDC, 2A
OUTPUT:
15W / 10W / 7.5W / 5W (Phone)
USE STEP
Step 1: Connect the wireless charger
TYPE-C socket
Step 2: Connect USB 2.0 interface
socket
Step 3: Connect a power socket,
then the wireless charger will
Show LED light (green color light).
Step 4: Put phone on wireless charger,
then phone will start to charger,
wireless charger will show LED
light (blue color light).
Applicable Devices
1. Devices with built-in wireless charging receiver (iPhone 11/11 Pro/11Pro Max/XR/X/
iPhone 9, Samsung S20/S20+/SamsungS7/S/+/S8/S8+/S9/S9+S10, Galaxy Note9/
Note 10/Nokia 1520, LG G/G7/V30/V40, Nexus6/7 and more, Xiaomi 10, Huawei Mate RS
/P30/P40 and more)
2. Devices with reserved wireless charging interface beside it battery (Samsung Galaxy
S3/S4/S5, Note 2/Note 3/ Note 4)
3. Devices with wireless charging receiver in its protection case (iPhone 5S/6/6s/6plus,
iPhone 7 ,etc)
General Safety
Read this manual thoroughly before you start using the product.
Store this manual, the completed warranty card, your receipt and
the product packaging. The safety precautions instructions reduces
the risk of fire, electric shock and injury when correctly complied to.
Please follow all instructions and take notice of all warnings.
To reduce the risk of injury:
• Do not allow metal objects to touch or pierce the device.
• Do not expose product to excessive heat and direct sunlight.
• Do not place near heat, your device may overheat and cause a fire.
• Do not drop or cause an impact to the charger or device.
• Make sure to keep device dry at all times.
• Do not disassemble, modify or attempt to repair this product.
• Do not place close to magnetic mechanisms, it will permenantly damage
this product.
• Please keep away from medical devices.
INSTRUCTION MANUAL
15W WIRELESS CHARGING STAND
UX1WC
SUPPORT
  • Page 1 1

Urbanworx UX1WC User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI