Generation Lighting F3081/9DAC/AC Operating instructions

Type
Operating instructions
1
Installation Instructions for
Jacksboro 5 and 9 Light Chandelier
1.0
F3080-5-F3081-9
Chandelier
F3080/5, F3081/9
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations.
This instruction shows a typical installation.
Feed the fixtures wires through the fixture loop and screw it to the top of the fixture.
Install the top cover to the fixture, install the bottom cover to the top cover, and secure them together by screwing
the finial onto the top cover.
Follow enclosed supplement installation instruction for electrical and fixture installation onto house outlet box.
Install candle follower onto the top of the candle tube.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Install the shade by placing it inside the shade base. Repeat steps 4-6 for remaining sockets.
1
2
3
4
5
6
LAMP
CANDLE TUBE
1
FIXTURE LOOP
CANDLE FOLLOWER
1A
3
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
SHADE BASE
SHADE
4
6
2
BOTTOM COVER
TOP COVER
FINIAL
5
SAVETHESE INSTRUCTIONS!
4
7400 Linder Ave, Skokie, 60077IL
800.969.3347
www.Feiss.com
© 2016 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Generation Lighting F3081/9DAC/AC Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI