LBL Lighting CH948ABLEDWD Installation guide

LBL Lighting
Brand
LBL Lighting
Model
CH948ABLEDWD
Type
Installation guide

This manual is also suitable for

Installation Instructions for
Chandelier
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing
NEC compliant junction boxes.
This product is suitable for damp locations.
1
Candora 19, 29, and 34 Chandelier
980CANDCH
1.0
946, 947, 948CH CH CH
1
1A
LED ASSEMBLY
SET SCREW
ALLEN WRENCH
COUPLER
UPPPER ARM
Loosen the set screws on the LED(do not remove)
assembly couplers using the provided Allen wrench.
Note: Candora 29 and 34 have two LED assemblies.
Insert the arms into the couplers and secure them by re-
tightening the set screws using the provided Allen
wrench.
Assemble the Fixture
2
3
1B
FOUR PORT
COUPLER
ARM
Install the remaining arms by inserting them into the
four port couplers. Make sure arms are fully inserted.
Note: Candora 29 and 34 fixtures have two pre-
assembled arms with fixture wires running through
them.
Note: Arms are separated into upper, middle and
lower arms.
UPPER
MIDDLE
LOWER
2
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2017 Lighting.All rights reserved.The " Lighting" graphic is aLBL LBL
registered trademark of Lighting. Lighting reserves the right toLBL LBL
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2

LBL Lighting CH948ABLEDWD Installation guide

LBL Lighting
Brand
LBL Lighting
Model
CH948ABLEDWD
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents