JONATHAN Y JYL5001A-SET2 Installation guide

Brand
JONATHAN Y
Model
JYL5001A-SET2
Type
Installation guide

This manual is also suitable for

JONATHAN Y JYL5001A-SET2 is a portable lamp with a polarized plug for safety. It has a maximum wattage of 100W for incandescent bulbs, 23W for CFL bulbs, and 12W for LED bulbs. The lamp comes with a 9W LED bulb. To assemble the lamp, insert the harp into the saddle, put the shade on the harp, and tighten the finial into the harp. Then, insert the bulb into the socket. The lamp should be placed on a level surface for stability.

JONATHAN Y JYL5001A-SET2 is a portable lamp with a polarized plug for safety. It has a maximum wattage of 100W for incandescent bulbs, 23W for CFL bulbs, and 12W for LED bulbs. The lamp comes with a 9W LED bulb. To assemble the lamp, insert the harp into the saddle, put the shade on the harp, and tighten the finial into the harp. Then, insert the bulb into the socket. The lamp should be placed on a level surface for stability.

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL IF THERE IS ANY DAMAGE OR
1/2
INSPECT
ITEM
CAREFULLY
BEFORE
ATTEMPTING
TO
INSTALL
.
IF
THERE
IS
ANY
DAMAGE
OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Model# JYL5008A-SET2
Product Dimensions: 12"L X 12"W X 30"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wi
p
e with a soft, dr
y
cloth and clean lam
p
bases with the methods a
pp
ro
p
riate to
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
vacuum brush
attachment.
Wipe
with
a
soft,
dry
cloth
and
clean
lamp
bases
with
the
methods
appropriate
to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
* Please make sure that you have all parts indicated before you begin assembly of this item
*
This item should be assembled on a soft surface to prevent scratching the finish during assembly
This
item
should
be
assembled
on
a
soft
surface
to
prevent
scratching
the
finish
during
assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D
Harp
1X
D
H
arp
1X
1/2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
2/2
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX ”
gg yp p p pp pg
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
THERE
IS
LED
9 WATT
BULB
IN
THE
BOX
11
12
3
11
12
3
Step 1 Step2 Step3
Insert the Har
D
into the Saddle
B
.
Insert the bulb
(
G） into the socket
(
C
)
.
Put the li
g
ht on a level surface to check
Insert
the
bulb(
G
）
into
the
socket(C).
Put
the
light
on
a
level
surface
to
check
Put the shade(E) on the Harp(D), then if everything is stable.
tighten the Finial (F)into the Harp (D)
ENJOY YOUR LAMP
ENJOY
YOUR
LAMP
2/2
  • Page 1 1
  • Page 2 2

JONATHAN Y JYL5001A-SET2 Installation guide

Brand
JONATHAN Y
Model
JYL5001A-SET2
Type
Installation guide
This manual is also suitable for

JONATHAN Y JYL5001A-SET2 is a portable lamp with a polarized plug for safety. It has a maximum wattage of 100W for incandescent bulbs, 23W for CFL bulbs, and 12W for LED bulbs. The lamp comes with a 9W LED bulb. To assemble the lamp, insert the harp into the saddle, put the shade on the harp, and tighten the finial into the harp. Then, insert the bulb into the socket. The lamp should be placed on a level surface for stability.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents