B C
d
2 pcs screws
1 pc Seat cushion 1 pc Back cushion
1 pc Chair metal frame
2 pcs screws
1 pc hex wrench
1. Put the seat cushion (A) on the chair metal frame (C),
then lay them down. Adjust seat cushion position
(so that screws point to the frame and seat cushion).
Put washers on the frame, use the hex wrench (d) to
tighten the screws (c) into the frame and seat cushion.
CAUTION:
THIS PRODUCT IS FOR INDOOR USE ONLY.
DO NOT STAND ON THIS PRODUCT IN ANY CIRCUMSTANCE.
MAX WEIGHT CAPACITY 264 lbs
Material is PU leather. It can be cleaned easily by soft wet cloth, then towel dry.
4 pcs screws
with 4 pcs washers
C
Fauteuil Direction Chair Assembly Instructions
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.amerihomebrand.com or call Customer Service at
1-888-287-6981, Monday-Friday, 8 AM - 4 PM
Central Time, or email: info@amerihomebrand.com. A copy of the sales receipt is required.
201612
FDCHAIR2PC-B/G/W
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.
2. Adjust back cushion (B) (so that screws a and
b point to the frame and back cushion). Use the
hex wrench to tighten the screws into the frame
and back cushion.
3. MAKE SURE THAT ALL PARTS ABOVE
ARE FIXED TIGHT AND FIRM BEFORE USE.
B
2 2
1
-
1
AmeriHome 802672 User manual
- Category
- Office & computer chairs
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
ROOMS TO GO 21300532 Assembly Instructions
-
Hampton Bay FG-VOL5DNTOF Installation guide
-
Envelor TRADITIONS4PCFP Installation guide
-
Hampton Bay 511.0070.000 Operating instructions
-
Hanover TRAD4PCRECFP-BLU Installation guide
-
Hanover TRADDN5PCSWG-RED Installation guide
-
-
-
-
