Cash Acme 22398-0000LF User guide

Brand
Cash Acme
Model
22398-0000LF
Type
User guide

This manual is also suitable for

Specifications: BY005 • Issue Date May 2014
2400 7th Avenue S.W · Cullman · Alabama 35055 · USA · www.cashacme.com
US Contact: 1-877-700-4242 · sales@cashacme.com · Canadian Contact: 1-888-820-0120 · canadasales@rwc.com
A Division of Reliance Worldwide Corporation
VR-801 Vacuum Relief Valve
DESCRIPTION
The Cash Acme VR-801 Vacuum Relief Valve is designed to protect hot water supply systems
and pressure vessels against negative pressure. It is especially well suited for many domestic
and commercial systems.
It works by preventing internal vacuum conditions that could result in burned out heaters and/or
collapsed storage tanks – especially copper.
Installed on the cold water supply line, the Cash Acme VR-801 closes tightly under pressure
and opens at a 1" mercury vacuum. Atmosphere admitted to the system breaks the vacuum,
preventing collapse of the storage tank. It is recommended that the VR-801 be installed in an
upright position.
The Cash Acme VR-801 is available in sizes 1/2" and 3/4" with male inlets. The VR-801 also
features a low profile design with a slotted vent hole. The vent hole is protected by a circular
dust cover that is approx.1.75" in diameter. This valve features an all brass body and body
cap, a heat-resistant silicone seat disc, an integral body seat and brass internal working parts.
Lead Free* versions of VR-801 are also available.
FEATURES AND BENEFITS
Prevents internal vacuum conditions:
Guards against siphonage, burnt-out heaters and collapsing of storage tanks and
negative pressure.
Opens quickly in emergency situations:
Opens on a one inch mercury vacuum.
Listed by CSA:
Inspector friendly, peace of mind!
Every valve is tested for performance prior to shipping:
Specify and install with confidence!
SPECIFICATIONS
A vacuum relief valve shall be installed to protect the pressure vessel. The valve shall be CSA
certified per ANSI Z21.22/CSA 4.4. The valve shall be constructed of brass with an integral
body seat disc. The valve shall open on a one-inch mercury vacuum. The valve shall be a
Cash Acme VR-801 Vacuum Relief Valve.
* A device is defined as Lead Free if its normally wetted surface has a weighted average lead
content not exceeding 0.25%
Specifications: BY005 • Issue Date May 2014
2400 7th Avenue S.W · Cullman · Alabama 35055 · USA · www.cashacme.com
US Contact: 1-877-700-4242 · sales@cashacme.com · Canadian Contact: 1-888-820-0120 · canadasales@rwc.com
A Division of Reliance Worldwide Corporation
VR-801 Vacuum Relief Valve
TYPICAL INSTALLATION
It is recommended that the VR-801 be installed in an upright position. For further installation
information, please contact the factory.
SPECIFICATION DATA
Performance:
Relief pressure (open) ……………….……… 1" Hg vacuum
Capacity ………………………………………. 13 SCFM (@ 2" Hg)
Maximum temperature ………………………. 210° F
Maximum inlet pressure …………………….. 200 psi
Service ………………………………………… Water
Materials:
Body …………………………………………… Brass
Body Cap ……………………………………… Brass
Internal Parts …………………………………. Brass
Seat Disc ……………………………………… Silicone
Spring …………………………………………. Stainless steel
Dust Cover ……………………………………. Polypropylene
AVAILABLE CONNECTIONS
Threaded (NPT) ………………………………. 1/2" and 3/4"
CERTIFICATIONS
The Cash Acme VR-801 Relief Valve is certified to ANSI Z21.22/CSA 4.4 and listed by CSA.
  • Page 1 1
  • Page 2 2

Cash Acme 22398-0000LF User guide

Brand
Cash Acme
Model
22398-0000LF
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents