PAC BKNDK738 User manual

PAC
Brand
PAC
Model
BKNDK738
Type
User manual

This manual is also suitable for

PAC BKNDK738

The PAC BKNDK738 is a mounting kit designed for Nissan Altima sedans from 2013 to 2017. It allows for the installation of an aftermarket radio into the vehicle's dash.

The kit includes brackets, screws, and a pocket to hold the radio in place. It is compatible with both single ISO mounting applications and double DIN mounting applications.

The BKNDK738 is easy to install and does not require any modifications to the vehicle's dash. It provides a secure and professional-looking installation for your aftermarket radio.

PAC BKNDK738

The PAC BKNDK738 is a mounting kit designed for Nissan Altima sedans from 2013 to 2017. It allows for the installation of an aftermarket radio into the vehicle's dash.

The kit includes brackets, screws, and a pocket to hold the radio in place. It is compatible with both single ISO mounting applications and double DIN mounting applications.

The BKNDK738 is easy to install and does not require any modifications to the vehicle's dash. It provides a secure and professional-looking installation for your aftermarket radio.

©2016 AMERICAN INTERNATIONAL INDUSTRIES, INC.
TECH Ver. 10/16 PRINT Ver. 10/16
NDK738 Mounting Kit
VEHICLE APPLICATION
Nissan
20013-17 ALTIMA SEDAN
iNDK738
www.aampglobal.com www.aius.net
2500 East Francis Street Ontario, CA 91761, U.S.A.
Sales: (800) 477-2267
Intl: (727) 572-9255
Support: 888-228-5560
Single ISO Mounting Applications
DASH DISASSEMBLY & RADIO REMOVAL INSTRUCTIONS
1. With a soft tool loosen the dash panel to the lower right of the steering wheel.
2. With a soft tool remove the silver dash trim from both the left and right side of
the radio/climate controls.
3. Remove the panel from below the climate controls.
4. Remove (4) Phillips Screws securing the radio, climate controls and air vents.
5. Remove climate controls and air vents, unplug all harnesses.
6. Remove (4) Phillips screws securing the radio brackets to the sub dash.
7. Remove radio and unplug all harnesses and antenna connections.
KIT ASSEMBLY INSTRUCTIONS
Note: This kit is an (ISO) mounting kit only. The mounting sleeve of your new radio cannot be used
when ISO mounting an aftermarket radio.
1. InsertpocketintolowersectionoftheNDK738brackets.SeegA
2. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible, or screws supplied with kit.
3. Slide radio forward or backward for desired look and tighten screws.
4. Testtkit/radiobymountingthebracketstothesubdashusingthe(4)OEMscrews,
and making sure the main frame of the NDK738 aligns correctly and does not leave
any gaps when installed. If everything looks correct go to step #5. If not, go back to
step # 3.
5. Suggested…Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio.
Note: This kit is an (ISO) mounting kit only. The mounting sleeve of your new radio cannot be used
when ISO mounting an aftermarket radio.
2
3
Double DIN Mounting Applications
KIT ASSEMBLY INSTRUCTIONS
See Fig B
1. Insert Double DIN radio between ISO mount brackets and loosely attach to sides of
radio using screws provided with radio when possible, or screws supplied with kit.
2. Slide radio forward or backward for desired look and tighten screws.
3.Testtkit/radiobymountingthebracketstothesubdashusingthe(4)OEM
screws, and making sure the main frame of the NDK738 aligns correctly and does
not leave any gaps when installed. If everything looks correct go to step #4. If not,
go back to step # 3.
4. Suggested…Attach a rear support bracket to the rear of the new radio and adjust
as necessary to support the weight of the radio.
Note: If there is an OEM A/C module present you can install it to the NDK738 brackets
using the OEM screws.
Fig. A
Fig. B
IMB738 Left
IMB738 Right
Main Frame
POC738
IMB738 Left
IMB738 Right
Main Frame
  • Page 1 1
  • Page 2 2

PAC BKNDK738 User manual

PAC
Brand
PAC
Model
BKNDK738
Type
User manual
This manual is also suitable for

PAC BKNDK738

The PAC BKNDK738 is a mounting kit designed for Nissan Altima sedans from 2013 to 2017. It allows for the installation of an aftermarket radio into the vehicle's dash.

The kit includes brackets, screws, and a pocket to hold the radio in place. It is compatible with both single ISO mounting applications and double DIN mounting applications.

The BKNDK738 is easy to install and does not require any modifications to the vehicle's dash. It provides a secure and professional-looking installation for your aftermarket radio.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents