Taramps 6″ FH 200S User manual

Type
User manual
The FH 200S was carefully designed to work with a wide response, adapng to the most varied types of sound
systems, standing out from the mid-bass to the highs with excellent acousc performance, due to the selecon of its
components such as bullet and cellulose whizzer cone , which contribute to this product achieving this excellent result, that
is, a frequency response of 100hz to 21khz. Live a new experience, listening to your playlist with a fidelity that will amaze
your ears.
Thiele-Small parameters are obtained after applying a sinusoidal level of 50hz for a period of 30 minutes.
A tolerance of + - 15% on the specified values is allowed.
RMS POWER
MUSICAL PROGRAM POWER
NOMINAL IMPEDANCE
RESISTANCE (RE)
NO (EFFICIENCY REFERENCE)
SENSITIVITY (@ 1W, 1 m)-Free-Air
DIAPHRAGM MASS (MMD)
TOTAL MASS (MMS)
BL PRODUCT
MECHANICAL Q (Qms)
ELECTRIC Q (Qes)
TOTAL Q (Qts)
COMPLIANCE (CMS)
EQUIVALENT VOLUME (VAS)
FREQUENCY RESPONSE
RESONANCE FREQUENCY
Le @ 10 kHz (coil inductance at 10kHz)
EFFECTIVE CONE AREA (SD)
CONE EXCURSION WITHOUT DISTORTION (X MAX)
FLOW DENSITY IN THE GAP
100 W
200 W
4 or 8 Ohms
3,4 / 7,2 ohms/VCC
1,037%
92,175 dB
6,894 g
7,901 g
4.340 TM
6,623
1,041
0,899
237,555u M/N
7,119 L
100Hz à 20.000Hz
116,169 Hz
0,1023 mH
0,0145 Sq.m
+- 3,00 mm
10.300 GAUSS
ELECTRICAL PARAMETERS MECHANICAL PARAMETERS
NOMINAL DIAMETER
FERRITE MEASURES
COIL DIAMETER
COIL HEIGHT
COIL WIRE MATERIAL
COIL WIRE SECTION
COIL SHAPE
GAP HEIGHT
HOUSING MATERIAL
FERRITE MATERIAL
WEIGHT
VOLUME OCCUPIED ON THE CABINET
6 Inches
102 X 43 X 14mm
1 1/4 Inches
8,5 mm
CCAW
Round
*Kapton
4,75 mm
Aço
Barium
1,28 Kg
0,47 Liters
®
CABINET SUGGESTIONS
VOLUME
LITERS
802 2"(POL) 100 mm 100 Hz 90 Hz - 24 dB/ Octave
- 24 dB/ Octave
02 2"(POL) 40,0 mm 100 Hz 90 Hz
QUANT. DIAM. DEPTH. (ACTIVE)
DUCTS SYNTONY (H.P.F) ATTENUATION
12
VENTED
BOX
MODEL DUCTS DUCTS
Box 12,0 litersBox 10,0 liters
20 Hz
Normalized Amplitude Response (dB-SPL/Hz)
dB
6
0
-6
-12
-18
-24
-30
-36
50 100 500 1 K 5 K 10 K 20 K
50 Hz 100 200 500 1K 2K 5K 10K 20K
dBSPL
60
70
80
90
100
110 SPL vs Freq
50 Hz 100 200 500 1K 2K 5K 10K 20K
Ohm
3
4
5
6
7
8
9
10
20
30 Impedance vs Freq
166,80 mm
102,00 mm
145,00 mm
60,50 mm
PRODUCT DIMENSIONS
Rod. Julio Budisk SP 501 s/n, - Compl. KM 30-A /SP ZIP:19.180-000 Phone Number +55 (18) 3266-4050 National Registry(CNPJ): 23.372.795/0001-64
Note: Features, specifications and aesthetics are subject to change without notice.
www.taramps.com.br
Response curve obtained in a 15L x 90Hz box
(1W x 1m).
ENGLISH
ENGLISH
ŸDamages incurred are caused by; transport or handling accident, or humidity.
ŸMalfunctions in product parts (torn cone/dust cap, bent or broken speaker housing).
ŸCoils burned out by excessive power or extreme distortion conditions, causing heating above 240º.
Transport
Warranty Coverage:
The customer will NOT have the warranty when:
WARRANTY TERM
ŸThe PRODUCT must contain the original label, on which its serial number is inserted.
ŸTo use the warranty, the customer must present the invoice and the warranty term, both of which must contain the serial
number on the product label.
Warranty Conditions:
The product has a warranty of 15 (fifteen) months after the issuance of the invoice, with the legal warranty of 90 days,
provided for in article 26, item ll, of law No. 8078/90 ( Brazilian consumer protection code).
ŸExceed the period of 15 (fifteen) months.
When all our products are produced, they undergo rigorous evaluations, in each construction process until they are
packaged, however, if any type of abnormality is detected, when opening the package, it must be sent to one of our
authorized service stations , or directly to the factory, if there is not an authorized technitian in your region. Each and every
product must undergo a technical evaluation so that the defect is identified and proven.
The product must be installed correctly, by a specialized professional, as well as respecting the product characteristics.
ŸDefects caused by improper installation.
ŸTaramps guarantees its products against any defect in material or manufacturing process, provided that, at the
discretion of its authorized technicians, it is found to be defective under normal conditions of use.
Only products that fall under the terms of warranty coverage will have their transportation expenses covered, otherwise,
the expense will be at the customer's expense.
INVOICE NUMBER
ZIP:
ZIP:
FHONE:
PHONE:
WARRANTY CERTIFICATE
NAME:
ADDRESS:
ADDRESS:
DEALER:
CITY:
CITY:
STATE:
STATE:
  • Page 1 1
  • Page 2 2

Taramps 6″ FH 200S User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI