Taramps 4″ T 100HD-D User manual

Type
User manual
4,6 80 Hz - 24 dB/ Oitava
- 24 dB/ Oitava
01
01
2"(POL)
2"(POL)
95 mm
90 mm
85 Hz
100 Hz
80 Hz
6,0
VENTED
BOX
106,50 mm
70,00 mm
91,00 mm
56,0 mm
Box 6,0 litersBox 4,6 liters
20 Hz
Normalized Amplitude Response (dB-SPL/Hz)
dB
6
0
-6
-12
-18
-24
-30
-36
50 100 500 1 K 5 K 10 K 20 K
®
50 W
100 W
4 ou 8 Ohms
2,9 / 6,5 ohms/VCC
0,199%
84,999 dB
3,589 g
3,810 g
2.237 TM
8,250
1,643
1,370
404,483u M/N
1,602 L
75Hz to 21.500Hz
128,205 Hz
0,0438 mH
0,0052 Sq.m
+- 2,00 mm
7.700 GAUSS
50 Hz 100 200 500 1K 2K 5K 10K 20K 30K
dBSPL
40
50
60
70
80
90
100
SPL vs Freq
20 Hz 50 100 200 500 1K 2K 5K 10K 20K
Ohm
2
3
4
5
6
7
8
9
10
20 Impedance vs Freq
NOMINAL DIAMETER
FERRITE MEASURES
COIL DIAMETER
COIL HEIGHT
COIL WIRE MATERIAL
COIL WIRE SECTION
COIL SHAPE
GAP HEIGHT
HOUSING MATERIAL
FERRITE MATERIAL
WEIGHT
VOLUME OCCUPIED ON THE CABINET
RMS POWER
MUSICAL PROGRAM POWER
NOMINAL IMPEDANCE
RESISTANCE (RE)
NO (EFFICIENCY REFERENCE)
SENSITIVITY (@ 1W, 1 m)-Free-Air
DIAPHRAGM MASS (MMD)
TOTAL MASS (MMS)
BL PRODUCT
MECHANICAL Q (Qms)
ELECTRIC Q (Qes)
TOTAL Q (Qts)
COMPLIANCE (CMS)
EQUIVALENT VOLUME (VAS)
FREQUENCY RESPONSE
RESONANCE FREQUENCY
Le @ 10 kHz (coil inductance at 10kHz)
EFFECTIVE CONE AREA (SD)
CONE EXCURSION WITHOUT DISTORTION (X MAX)
FLOW DENSITY IN THE GAP
Thiele-Small parameters are obtained after applying a sinusoidal level of 50hz for a period of 30 minutes.
A tolerance of + - 15% on the specified values is allowed.
4 Inches
70 X 32 X 15mm
1 Inche
6,5 mm
CCAW
Round
*Kapton
6,35 mm
Steel
Barium
0,66 Kg
0,19 Liters
MECHANICAL PARAMETERSELECTRICAL PARAMETERS
CABINET SUGGESTIONS
PRODUCT DIMENSIONS
Response curve obtained in a 4L x 110Hz box (1W x 1m).
Rod. Julio Budisk SP 501 s/n, - Compl. KM 30-A /SP ZIP:19.180-000 Phone Number +55 (18) 3266-4050 National Registry(CNPJ): 23.372.795/0001-64
Note: Features, specifications and aesthetics are subject to change without notice.
www.taramps.com.br
VOLUME
LITERS QUANT. DIAM. PROF. (ACTIVE)
DUCTOS DUCTOS DUCTOS SYNTONY (H.P.F) ATTENUATION
MODEL
The T 100 HD-D is a speaker that was carefully designed to work with wide response, (full range) and high
definion, adapng to the most varied types sound systems, reproducing bass, clean mids and crystal clear highs, with low
distorons due to its topology. Electro-acousc construcon, it has a high frequency cellulose whizzer cone. It aksi features
a foam edge providing beer linearity in its response range. Live a new experience listening to your playlist with a fidelity
that will amaze your ears, and potencialize your musical experience.
T 100 HD-D
ENGLISH
Warranty Coverage:
The product has a warranty of 15 (fifteen) months after the issuance of the invoice, with the legal warranty of 90 days,
provided for in article 26, item ll, of law No. 8078/90 ( Brazilian consumer protection code).
WARRANTY TERM
Warranty Conditions:
The product must be installed correctly, by a specialized professional, as well as respecting the product characteristics.
ŸExceed the period of 15 (fifteen) months.
When all our products are produced, they undergo rigorous evaluations, in each construction process until they are
packaged, however, if any type of abnormality is detected, when opening the package, it must be sent to one of our
authorized service stations , or directly to the factory, if there is not an authorized technitian in your region. Each and every
product must undergo a technical evaluation so that the defect is identified and proven.
ŸDamages incurred are caused by; transport or handling accident, or humidity.
ŸDefects caused by improper installation.
ŸTaramps guarantees its products against any defect in material or manufacturing process, provided that, at the
discretion of its authorized technicians, it is found to be defective under normal conditions of use.
ŸMalfunctions in product parts (torn cone/dust cap, bent or broken speaker housing).
The customer will NOT have the warranty when:
ŸCoils burned out by excessive power or extreme distortion conditions, causing heating above 240º.
Transport
ŸThe PRODUCT must contain the original label, on which its serial number is inserted.
ŸTo use the warranty, the customer must present the invoice and the warranty term, both of which must contain the serial
number on the product label.
Only products that fall under the terms of warranty coverage will have their transportation expenses covered, otherwise,
the expense will be at the customer's expense.
INVOICE NUMBER
ZIP:
ZIP:
FHONE:
PHONE:
WARRANTY CERTIFICATE
NAME:
ADDRESS:
ADDRESS:
DEALER:
CITY:
CITY:
STATE:
STATE:
  • Page 1 1
  • Page 2 2

Taramps 4″ T 100HD-D User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI