VOLUME
LITERS
6,0 120 Hz - 24 dB/ Octave
- 24 dB/ Octave
- 24 dB/ Octave
02
**
02
2"(POL)
**
2"(POL)
68 mm
**
63 mm
110,0 Hz
**
130,0 Hz
100 Hz
140 Hz
QUANT. DIAM. PROF. (ACTIVE)
DUCTOS DUCTOS DUCTOS SYNTONY (H.P.F) ATTENUATION
8,0
6,0
VENTED
BOX
CLOSED
BOX
MODEL
130,30 mm
86,00 mm
111,50 mm
55,00 mm
Box 8,0 litros Closed BoxBox 6,0 litros
20 Hz
Normalized Amplitude Response (dB-SPL/Hz)
dB
6
0
-6
-12
-18
-24
-30
-36
50 100 500 1 K 5 K 10 K 20 K
MECHANICAL PARAMETERS
NOMINAL DIAMETER
FERRITE MEASURES
COIL DIAMETER
COIL HEIGHT
COIL WIRE MATERIAL
COIL WIRE SECTION
COIL SHAPE
GAP HEIGHT
HOUSING MATERIAL
FERRITE MATERIAL
WEIGHT
VOLUME OCCUPIED ON THE CABINET
5 inches
86 X 43 X 14mm
1 inch
6,5 mm
Copper
Round
*Kapton
4.75 mm
Steel
Barium
0.85 Kg
0.26 Liters
®
20 Hz 50 100 200 500 1K 2K 5K 10K 20K
Ohm
3
4
5
6
7
8
9
10
20 Impedance vs Freq
50 Hz 100 200 500 1K 2K 5K 10K 20K 30K
dBSPL
60
70
80
90
100
110
SPL vs Freq
RMS POWER
MUSICAL PROGRAM POWER
NOMINAL IMPEDANCE
RESISTANCE (RE)
NO (EFFICIENCY REFERENCE)
SENSITIVITY (@ 1W, 1 m)-Free-Air
DIAPHRAGM MASS (MMD)
TOTAL MASS (MMS)
BL PRODUCT
MECHANICAL Q (Qms)
ELECTRIC Q (Qes)
TOTAL Q (Qts)
COMPLIANCE (CMS)
EQUIVALENT VOLUME (VAS)
FREQUENCY RESPONSE
RESONANCE FREQUENCY
Le @ 10 kHz (coil inductance at 10kHz)
EFFECTIVE CONE AREA (SD)
CONE EXCURSION WITHOUT DISTORTION (X MAX)
FLOW DENSITY IN THE GAP
25 W
50 W
4 or 8 Ohms
3.0 / 6.3 ohms/VCC
0.589%
89.720 dB
6.258 g
6.695 g
4.540 TM
3.412
1.136
0.852
109.888u M/N
1.083 L
90Hz to 21.000Hz
185.550 Hz
0,1023 mH
0,0083 Sq.m
+- 2.05 mm
10.420 GAUSS
Thiele-Small parameters are obtained after applying a sinusoidal level of 50hz for a period of 30 minutes.
A tolerance of + - 15% on the specified values is allowed.
ELECTRICAL PARAMETERS
CABINET SUGGESTIONS
PRODUCT DIMENSIONS
Rod. Julio Budisk SP 501 s/n, - Compl. KM 30-A /SP ZIP:19.180-000 Phone Number +55 (18) 3266-4050 National Registry(CNPJ): 23.372.795/0001-64
Note: Features, specifications and aesthetics are subject to change without notice.
www.taramps.com.br
Response curve obtained in a 8L x 110Hz box (1W x 1m).
FH 50D, a product that was carefully designed to work with wide response, adapng to the most varied types of
sound systems, standing out in the mid-bass to the highs with excellent acousc performance, it featuresa cellulose whizzer
cone that contributes to this product achieves an excellent result, that is, a frequency response from 90hz to 21khz. Live a
new experience listening to your playlist with a fidelity that will amaze your ears.
FH 50D
ENGLISH
When all our products are produced, they undergo rigorous evaluations, in each construction process until they are
packaged, however, if any type of abnormality is detected, when opening the package, it must be sent to one of our
authorized service stations , or directly to the factory, if there is not an authorized technitian in your region. Each and every
product must undergo a technical evaluation so that the defect is identified and proven.
WARRANTY TERM
Warranty Coverage:
Warranty Conditions:
The product must be installed correctly, by a specialized professional, as well as respecting the product characteristics.
The product has a warranty of 15 (fifteen) months after the issuance of the invoice, with the legal warranty of 90 days,
provided for in article 26, item ll, of law No. 8078/90 ( Brazilian consumer protection code).
ŸTaramps guarantees its products against any defect in material or manufacturing process, provided that, at the
discretion of its authorized technicians, it is found to be defective under normal conditions of use.
ŸDamages incurred are caused by; transport or handling accident, or humidity.
The customer will NOT have the warranty when:
ŸDefects caused by improper installation.
ŸThe PRODUCT must contain the original label, on which its serial number is inserted.
ŸExceed the period of 15 (fifteen) months.
ŸCoils burned out by excessive power or extreme distortion conditions, causing heating above 240º.
ŸMalfunctions in product parts (torn cone/dust cap, bent or broken speaker housing).
ŸTo use the warranty, the customer must present the invoice and the warranty term, both of which must contain the serial
number on the product label.
Transport
Only products that fall under the terms of warranty coverage will have their transportation expenses covered, otherwise,
the expense will be at the customer's expense.
INVOICE NUMBER
ZIP:
ZIP:
FHONE:
PHONE:
WARRANTY CERTIFICATE
NAME:
ADDRESS:
ADDRESS:
DEALER:
CITY:
CITY:
STATE:
STATE:
/
