Aseptico Wake-up Battery Owner's manual

HOW TO ENABLE YOUR

NOMAD™ PRO 2 HANDSET

Occasionally, a handset may enter sleep mode and disable itself. This is a feature which will extend the useful life of the

battery. Sleep mode occurs when the handset is stored attached to the device or not used for an extended period of time.

Luckily, waking up the handset is quick, easy, and safe.

How do you know if your handset is in sleep mode? Remove handset from charger or device, wait 5 seconds,

seen, the handset is in sleep mode. To enable the handset, simply follow the steps, below.

avoid sleep mode in the future, store handset detached from device and fully charge every two months. Note: Charging

process described above fails to enable the handset after

three attempts, authorized service may be required.

STEP 1. Unplug the cord from the charging cradle.

STEP 2. Put the handset on the charging cradle.

STEP 3.

421248 Rev A ECO 15821 10/23