WPI 3469 Rackmount Kit User manual

  • Hello, I'm a chat assistant who has reviewed the provided instructions for the World Precision Instruments 3469 rackmount hardware. The document outlines how to assemble the rackmount brackets and prepare them for installation in a standard 19-inch rack. Feel free to ask me any questions you have about the device or the instructions.
  • What screws are used to mount the angle brackets to the instrument case?
    What type of screws are used to fasten the filler panels to the brackets?
    What is the rack size for the device?
World Precision Instruments, Inc.
International Trade Center, 175 Sarasota Center Boulevard, Sarasota FL 34240-9258 USA
Telephone: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected]
UK: Astonbury Farm Business Centre, Astonbury, Stevenage, Herts SG2 7EG UK • Tel: 0438-880025 • Fax: 0438-880026 • E-mail: [email protected]
Germany: Liegnitzer Str. 15, D-10999 Berlin, Germany • Tel: 030-6188845 • Fax: 030-6188670 • E-mail: [email protected]
Japan: 1-4-2-702 Naka-Meguro, Meguro, Tokyo 153-0061, Japan • Tel: 03-3760-5050 • Fax: 03-3760-5055 • E-mail: [email protected]
Australia: P.O. Box 1191, Glen Waverley, Victoria 3150, Australia • Tel: 03-9887-6262 • Fax: 03-9887-9585 • E-mail: [email protected]u
After the two filler panels are fastened to
the brackets with the flathead screws, the
unit is ready for mounting in a standard
19-inch rack.
First, mount the two two angle brackets to
the instrument case with the four
Phillips-head screws.
12.19.90
Kit #3469
Single-instrument 3.5-inch rackmount hardware
/