2. HELVAR
  3. LL1x2130-SR Click-on strain relief

HELVAR LL1x2130-SR Click-on strain relief Installation guide

  • Hello! I have reviewed the provided Installation Guide for the LL1x2130-SR strain relief. The document outlines the steps for proper installation, including securing the driver, connecting wires, mounting cables, and fastening the cover. I'm ready to assist you with any queries regarding the installation process or other details within the document.
  • How to mount the driver?
    How to connect wires?
    How to mount cables?
    When should I use the screws?
    How to lock cover?
Helvar | Data is subject to change without notice. I28 003 1 A 11.2022
LL1x2130-SR
Strain Relief Installation Guide
1. Lock the driver in the bottom part. 2. Connect wires
according to driver datasheet.
H03VV-F 2x0,75 mm² H05VV-F 3x1,0 mm²
MMJ 3x1,5 mm²
3. Examples for cable mounting
into strain relief:
Ensure that the part marked with red colour
is on top of the metal bottom part of the driver.
Up to 9mm
Up to 10-11mm
MMJ 5x1.5 mm²
Make sure to fasten the screw in step 5,
if connected as the black cable.
Ensure that the cable is firmly and
securely mounted into the strain relief!
Helvar | Data is subject to change without notice. I28 003 1 A 11.2022
4. Lock the cover on the bottom part.
5. Optional when needed.
(Screws supplied in the strain relief package)
Ensure that
the cover clicks
into place!
LL1x2130-SR
Strain Relief Installation Guide
/