George Kovacs P1797-077 User manual

Type
User manual

This manual is also suitable for

Installation Instruction
For Portable Lamp
Model#P1797-077-L & P1797-416-L
WARNING:
Risk of shock, do not plug in the unit before assembly is complete.
Do not exceed the maximum wattage rating (4W LED bulb max.)
Before you begin assembly of your new fixture, please follow the instruction manual step by step.
INSTRUCTION:
1. Place all parts on a smooth, flat surface to protect the finish until ready to install.
2. Thread the crystal bar (A) onto the nipple (B) well.
3. Pull the exposed wire out from the base well.
4. Thread rod (F) onto the nipple (G) on base.
5. Thread the upper assembly (E) onto the top end of the rod (F).
6. Install the Light Bulb (C) included in accordance with the lamp’s specifications marked on the socket (D),.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)
(NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)
INPORTANT SAFETY INSTRUCTIONS
1. This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to
reduce the risk of electric shock. This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug .If it still doesn’t fit, contact a qualified
electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter Plug.
2. This lamp uses ON/OFF switch on the plug wire.
B
  • Page 1 1

George Kovacs P1797-077 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI