Welbilt mini easyTouch UL Installation guide

Combi Oven

OES 6.10 mini easyTouch

Operating manual UL, USA – Original, ENG

FOR THE INSTALLER, OPERATOR, RESPONSIBLE OWNER

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors or liquids in the

vicinity of this or any other unit.

WARNING

Improper installation, adjustment, alteration, service or maintenance can

cause property damage, injury and death. Read the installation, operating

and maintenance instructions thoroughly before installing or servicing this

equipment.

WARNING

To reduce the risk of electric shock, do not remove or open cover.

No user serviceable parts inside. Refer servicing to qualified personnel.

Disconnect power supply before servicing.

WARNING

Disconnect power at the main external power switch before servicing or

repairing a combi oven.

IMPORTANT

ALL SERVICE MUST BE PERFORMED BY A QUALIFIED CONVOTHERM AUTHORIZED TECHNI‐

CIAN.

KEEP AREA FREE AND CLEAR OF COMBUSTIBLES.

Installation

■

Installation of this unit must be done by a licensed professional when installed in the Commonwealth

of Massachusetts.

■

The wiring diagram is located on the inner part of the side panel.

Customer documentation

■

The customer documentation is part of the combi oven.

■

Keep the customer documentation manuals handy at all times so that you can look up any required

information.

■

Keep the customer documentation manuals for the entire life of the unit.

■

Carefully read the installation manual, the operating manual, and the operating instructions before

using, handling, and working on this unit.

■

If you transfer the combi oven to a new owner, make sure to give the new owner the customer doc‐

umentation manuals as well.

Table of Contents

1 General 8

1.1 Environmental Protection 8

1.2 Identifying Your Combi Oven 9

1.3 Customer Documentation Structure 10

1.4 Safety Information That Must Be Read without Exception 11

1.5 About this operating manual 12

2 Configuration and Functions 14

2.1 Basic overview of how the combi oven works 14

2.2 The Combi Oven's Configuration and Functions 15

2.3 Control Panel Layout and Functions 17

3 For Your Safety 18

3.1 Basic Safety Instructions 18

3.2 Your Combi Oven's Intended Use 19

3.3 Warning Labels on the Combi Oven 21

3.4 Overview of Hazards 23

3.5 Hazards and Safety Measures During Operation 25

3.6 Hazards and Safety Measures During Cleaning 30

3.7 Hazards and Safety Measures During Maintenance 36

3.8 Safety Devices 39

3.9 Staff and Work Area Requirements 41

3.10 Personal protective equipment 42

4 Getting Started 43

4.1 Turning the Combi Oven On and Off 43

4.2 Switching from easyStart to easyTouch 44

4.3 Basic Steps for Cooking with easyTouch 45

4.4 Basic Steps for Rethermalization with easyTouch 46

5 How the Touchscreen's Pages Are Laid Out 47

5.1 Work Pages 47

5.1.1 How the Work Pages Are Laid Out 47

5.1.2 The on-screen help home page 49

5.1.3 Cooking page 50

5.1.4 The easyStart page 53

5.1.5 Press&Go page 54

5.1.6 Rethermalization page 55

5.1.7 Cleaning page 58

5.2 The Cookbook 59

5.2.1 How the Cookbook Pages Are Laid Out 59

5.2.2 The 'Favorites' page 61

5.2.3 The 'Product groups' page 63

5.2.4 The 'Cooking profiles' page 66

5.3 Settings 68

5.3.1 Settings Pages 68

5.3.2 The 'General' menu 69

5.3.3 The 'Language / Cookbook' menu 70

5.3.4 The 'Transfer' menu 71

5.3.5 The 'Logbook' menu 72

5.3.6 The 'Date / Time' menu 73

Table of Contents

Operating Manual 5

5.3.7 The 'Sounds' menu 74

5.3.8 The 'Password' menu 75

5.3.9 The 'Backup/Restore' menu 76

5.3.10 The 'Import/Export' menu 77

6 How to Work with the Touchscreen 79

6.1 Entering Cooking Data 79

6.1.1 Setting Up a Cooking Program 79

6.1.2 Setting Up a Rethermalization Program 81

6.2 Using Extra Functions and Special Programs 82

6.2.1 Using Delta-T Cooking 82

6.3 Using Functions While a Program Is Running 83

6.3.1 Changing Cooking Parameters While a Program Is Running 83

6.3.2 Stopping a Program Before It Ends 83

6.4 Working with the Cookbook 84

6.4.1 Accessing a cooking profile in the cookbook 84

6.4.2 Opening a BakePro Cooking Profile from the Cookbook 86

6.4.3 Create cooking profile 87

6.4.4 Changing the name and icon for a cooking profile 89

6.4.5 Delete the cooking profile from the cookbook 90

6.4.6 Adding and removing cooking profile to/from your favorites 91

6.4.7 Creating New Product Groups 93

6.4.8 Changing the name and icon for a product group 94

6.4.9 Storing / Removing Cooking Profiles in / from a Product Group 95

6.4.10 Press to delete the product group 97

6.5 Making changes with the settings 98

6.5.1 Options that can be configured with the service interface 98

7 Cooking and Rethermalizing 99

7.1 Safely Using the Unit 99

7.2 Cooking with Press&Go 101

7.3 Day-to-Day Cooking 103

7.4 Day-to-Day Rethermalization 105

7.5 Manual Steaming During Cooking 107

7.6 Using Unoccupied Shelves During Cooking 108

7.7 Using Unoccupied Shelves During Rethermalization 109

7.8 Cooling Down the Oven 110

7.9 Cleaning the oven automatically 111

8 How to do it right 112

8.1 Safely Using the Unit 112

8.2 Safely Opening and Closing the Unit Door 113

8.3 Placing Food Inside and Taking It Out 114

8.4 Removing and installing racks 116

8.5 Removing and installing the suction panel 118

8.6 Putting Away and Removing the Core Temperature Probe 120

8.7 Plugging in the USB stick 121

9 Cleaning and maintenance 122

9.1 Cleaning schedule and cleaning agent 122

9.1.1 Cleaning schedule 122

9.1.2 Cleaning agents 124

9.2 Cleaning programs and tasks 126

9.2.1 Working Safely When Cleaning 126

Table of Contents

Operating Manual 6

9.2.2 Cooling Down the Oven 129

9.2.3 Cleaning the oven automatically 130

9.2.4 Cleaning a Cold Oven Cavity Semi-Automatically 131

9.2.5 Cleaning a Hot Oven Cavity Semi-Automatically 134

9.2.6 Using the ConvoClean System's Fully Automatic Cleaning Sequence to Clean the

Oven When It Is Cold

137

9.2.7 Using the ConvoClean System's Fully Automatic Cleaning Sequence to Clean the

Oven When It Is Hot

139

9.2.8 Cleaning the hygienic removable gasket 141

9.2.9 Clean the double-pane door 142

9.2.10 Cleaning the oven cavity behind the suction panel 143

9.2.11 Replacing the cleaning agent canister containing ConvoClean forte 145

9.2.12 Replacing cleaning agent canisters with ConvoCare 146

9.3 Maintenance 147

9.3.1 Maintenance schedule 147

9.3.2 Emergency Mode 148

9.3.3 Troubleshooting – Error Codes 150

9.3.4 Troubleshooting – Problems During Operation 152

9.3.5 Replacing the oven light halogen lamp 154

10 The cooking programs in your combi oven 158

10.1 The Cooking Programs at a Glance 158

10.2 Steaming 159

10.3 Combi-steam 161

10.4 Hot air 162

10.5 Rethermalization 163

10.6 Core temperature measurement 164

10.7 Delta-T cooking 166

10.8 ecoCooking 168

10.9 Overnight cooking 169

11 Coming Up with Your Own Custom Cooking Profiles 172

11.1 Side dishes 172

11.2 Fish 173

11.3 Meat, poultry, game 174

11.4 Pastries 176

12 Pre-Defined Cooking Profiles in easyStart 178

12.1 Protein Product Group 178

12.2 Side Dishes product group 178

12.3 Baking Product Group 179

12.4 Breakfast Product Group 179

Table of Contents

Operating Manual 7

1 General

Purpose of this section

This section provides information on how to identify your combi oven and how to use this manual.

1.1 Environmental Protection

Policy statement

Our customers' expectations, the legal regulations and standards we have to follow, and our compa‐

ny's reputation are what drives the quality and service behind all our products.

Our environmental management policy is not only designed to ensure that we are always in full com‐

pliance with all environmental laws and regulations, but also reflects our commitment to the environ‐

ment and to continuously improving our performance in this field.

In order to ensure that we meet all of our environmental goals while maintaining the high quality of our

products, and that things stay this way, we have developed a quality and environmental management

system.

This system meets the requirements set forth in ISO 9001:2008 and ISO 14001:2004.

Environmental protection measures

The following measures apply to this product:

■

Uses fully compostable packing products

■

Uses RoHS-compliant products

■

Complies with the REACH regulation

■

Shipping boxes are reused

■

Recommends and uses biodegradable cleaning agents

■

E-waste recycling

■

Environmentally friendly disposal of old units

Join us in our commitment to protecting the environment!

1 General

Operating Manual 8

1.2 Identifying Your Combi Oven

Nameplate location

The nameplate is found on the left side of the combi oven.

Nameplate layout and structure

The nameplate makes it easy to identify your unit. The nameplate has the following layout:

No. Designation

1

Unit name

Combi Oven

2

Trade name

Letters: Meaning:

OES Electrical units with water injec‐

tion

xx.yy numbers Unit size

mini Series

3

Electrical specifications

4

Unit tests

5

Serial number

6

Item number

1 General

Operating Manual 9

1.3 Customer Documentation Structure

Customer documentation parts

The customer documentation for the combi oven is made up of the following:

■

Installation manual

■

Operating manual (this manual)

■

Operating instructions for easyStart mode

■

Help pages integrated into the software (excerpt from the operating manual)

Customer Documentation Structure

The following table outlines how the customer documentation is structured:

Subject Description Please refer to

Transportation Transporting the combi oven Installation manual

(intended for trained

qualified personnel;

see Staff Require‐

ments)

Setup

■

Setup options

■

Correctly setting up the combi oven

Installation

■

Electrical connection

■

Water connection

■

Installing the ConvoClean fully automatic clean‐

ing system

Placing into operation Combi oven initial startup

Operation

■

User interface explanation

■

Work sequences and steps

Operating manual

(intended for briefed

staff and trained

qualified staff; see

Staff Requirements

)

Cleaning

■

Cleaning schedule

■

Cleaning programs and tasks

Maintenance

■

Maintenance Schedule

■

limited maintenance work

Removing from service Removing the combi oven from service Installation manual

Technical data

■

Shelf options

■

max. loading weight

Operating manual

All the technical data for the combi oven Installation manual

Scale drawings, connec‐

tion points

All the scale drawings and connection points for

the combi oven

Installation manual

Checklists Installation checklists

1 General

Operating Manual 10

1.4 Safety Information That Must Be Read without Exception

Safety information found in the documentation for the customer

The most important safety information for the combi oven is essentially found in the installation manual

and operating manual.

The installation manual provides safety information for the transportation, setup, installation, placing-

into-operation, and removal-from-service tasks it describes.

The operating manual provides safety information for the cooking, cleaning, and maintenance tasks it

describes.

When using the operating instructions, the operating manual or installation manual should always be

consulted in order to obtain the relevant safety information. When performing activities that go beyond

simply using the software, the safety information in the operating manual and installation manual must

always be observed.

Parts of this document that must be read without exception

Failure to take the information in this document into account may result in death, injury, or property

damage.

In order to ensure their safety and the safety of others, everyone working with/on the combi oven must

read and understand the following parts of this document before starting any work:

■

The 'For Your Safety' section; please refer to For Your Safety

on page 18

■

The sections describing the work that will be carried out

Danger symbol

Danger symbol Meaning

Used to warn of potential injury. Observe all the precautionary state‐

ments following this symbol in order to avoid injury or death.

Precautionary statements

The precautionary statements in this manual are categorized using the following hazard levels:

Hazard level Consequences Likelihood

Death / severe injury (irreversible) Imminent

Death / severe injury (irreversible) Potential

Minor injury (reversible) Potential

NOTICE

Property damage Potential

1 General

Operating Manual 11

1.5 About this operating manual

Purpose

The purpose of this operating manual is to provide everyone working with/on the combi oven with the

information they will need to carry out operation, cleaning, and limited maintenance work safely and

correctly.

Target groups

This operating manual is intended for the following target groups:

Name of target group Tasks

Cook Primarily takes care of organizational tasks, such as:

■

Entering cooking program data

■

Editing existing cooking profiles in the

cookbook

■

Coming up with new cooking profiles

■

Configuring the unit's settings

and takes care of all operator tasks as well if necessary.

Operator Actually operates the combi oven, taking care of tasks such as:

■

Putting food into the combi oven

■

Starting the cooking program

■

Taking out the food once it has been cooked

■

Cleaning the combi oven

■

Limited troubleshooting

Operating Manual Outline

The following table describes the contents, the goals, and the target groups for the various sections in

this manual:

Section / sub-section Purpose Target

group

General

■

Helps identify your combi oven

■

Explains how to use this operating manual

Cook

Configuration and Func‐

tions

■

Describes the combi oven's intended use

■

Explains the combi oven's functions and describes where

its components are located

■

Describes the technical data for the shelf options and the

maximum loading weight

Cook

Operator

For Your Safety Describes all the risks and hazards posed by the combi

oven, as well as appropriate instructions on how to prevent

and/or counter them

Read this section very carefully!

Cook

Operator

Getting Started

■

Explains how to turn on the combi oven

■

Provides general instructions for working with the combi

oven

Cook

How the Touchscreen's

Pages Are Laid Out

Describes the user interface Cook

Operator

How to Work with the

Touchscreen

Provides basic instructions for operating the combi oven us‐

ing the touchscreen

Cook

Operator

Cooking and Rethermal‐

izing

Provides cooking and rethermalization instructions Operator

How to do it right Provides instructions for the work steps that need to be

used repeatedly when working with the combi oven

Operator

1 General

Operating Manual 12

Section / sub-section Purpose Target

group

Cleaning and mainte‐

nance

■

Includes the cleaning schedule

■

Provides the maintenance schedule where relevant to the

operator

■

Provides cleaning instructions

Cook

Operator

The cooking programs in

your combi oven

Goes over the cooking programs Cook

Coming Up with Your

Own Custom Cooking

Profiles

Describes cooking profiles as examples for coming up with

your own cooking profiles

Cook

Pre-Defined Cooking

Profiles in easyStart

Describes pre-defined cooking profiles in defined product

groups for fast cooking in easyStart

Cook

Operator

Decimal mark used

In order to ensure that all numbers can be properly understood internationally, a decimal point is al‐

ways used.

1 General

Operating Manual 13

2 Configuration and Functions

Purpose of this section

This section describes the combi oven's configuration and explains its functions.

2.1 Basic overview of how the combi oven works

Basic cooking programs

Your combi oven can be used to cook a variety of food. To do this, you can use any of the following

basic cooking programs on the combi oven:

■

Steam

■

Hot air

■

Combi-steam (steam superheated without pressure)

Cooking methods you can use

The basic cooking programs can be used for virtually any existing cooking method.

The cooking methods you can use are listed below:

■

Steaming

■

Braising

■

Low-temperature cooking

■

Blanching

■

Baking

■

Thawing food

■

Poaching

■

Scalloping

■

Overnight cooking

■

Stewing

■

Broiling

■

Delta-T cooking

■

Cooking

■

Cooking au gratin

■

ecoCooking

■

Roasting

■

Rethermalization

The basics of working with your combi oven

The following are the basic steps involved in using the combi oven:

■

Place food in bakeware or on shelf grills and then in your combi oven.

■

Set up a cooking program or a cooking time and start it.

■

Once the cooking program is done, remove the food, which should be cooked to your liking.

2 Configuration and Functions

Operating Manual 14

2.2 The Combi Oven's Configuration and Functions

Combi oven's configuration

The following figure illustrates the combi oven:

1 2

10

5 7 86

9

3 4

11

The combi oven's parts and what they do

Following is a description of what the combi oven's parts do:

No. Designation Function

1

Ventilation port Draws in ambient air in order to remove moisture

2

Air vent Lets steam escape

3

Door handle

■

Used to open and close the unit door

■

Cracked-open position for safely opening the combi oven

■

Coated with an antimicrobial coating featuring silver ions ('hy‐

gienic handle')

4

Unit door Seals the oven cavity

5

Control panel Used to control the combi oven

6

Suction panel Used to distribute heat within the oven

7

Rack Used to hold standard-size bakeware

8

Oven light Illuminates the oven cavity

9

Core temperature probe Used to measure the food's core temperature

10

Oven cavity Is where food is placed while it is being cooked

11

Nameplate Used to identify the combi oven

Shelf options

The following table lists the various shelf options:

Capacity

Qty.

13" x 18" half size sheet pans [pcs] 6

12" x 20" by 2 1/2" steam table pans [pcs] 4

12" x 20" wire fry baskets [pcs] 3

Plates, max Ø 11" (rethermalization only) [pcs] 8

2/3 US hotel pan [pcs] 4

2 Configuration and Functions

Operating Manual 15

Only use standard size bakeware (containers, oven racks, and sheet pans) with appropriate dimen‐

sions.

The rack can accommodate a variety of sheet pans, bakeware, and oven racks. The specific ones lis‐

ted above are provided only as an example. In addition, custom rack configurations with customized

loading capacities are available.

Maximum permissible loading weight

The following table lists the maximum permissible loading weight for each combi oven. These values

apply under the condition that the weight loaded onto each shelf does not exceed 11 lbs:

Maximum permissible loading weight

Standard size bakeware (containers, oven

racks, sheet pans)

Per combi oven [lbs] 44

Per shelf [lbs] 11

2 Configuration and Functions

Operating Manual 16

2.3 Control Panel Layout and Functions

Control panel layout

The figure below shows the control panel:

Control panel parts

Following is an explanation of what the control panel's parts do:

No. Designation Function

1

Main switch Used to turn the combi oven on and off

2

Touchscreen Central combi oven controls

■

Used by touching the icons on the touchscreen

■

Status indicators

3

USB port Used to connect external devices

2 Configuration and Functions

Operating Manual 17

3 For Your Safety

Purpose of this section

The purpose of this section is to provide you with all the information you will need in order to safely

work with/on the combi oven without putting yourself and others at risk.

Read this section very carefully!

3.1

Basic Safety Instructions

Purpose of these instructions

The purpose of these instructions is to ensure that everyone working with and on the combi oven will

be fully aware of all the risks, hazards, and safety requirements involved and will observe the warnings

in the operating manual and on the combi oven. Failure to follow these instructions may result in

death, injury, or property damage.

Customer documentation manuals

Follow the instructions below:

■

Fully read the 'For Your Safety' section, as well as the section that applies to the way you will be

interacting with the combi oven.

■

Keep the customer documentation manuals handy at all times so that you can look up any required

information.

■

If you transfer the combi oven to a new owner, make sure to give the new owner the customer

documentation manuals as well.

Working with/on the combi oven

Follow the instructions below:

■

Only people who meet all the requirements specified in this operating manual should be allowed to

use and otherwise work with/on the combi oven.

■

Only use the combi oven for its intended use as described in this manual. Never, under any circum‐

stance, use the combi oven for other purposes, even if they seem obvious.

■

Observe all the safety measures specified in this operating manual and on the combi oven. This

applies especially to wearing the required personal protective equipment.

■

Make sure to always stay in the specified work areas when working with/on the combi oven.

■

Do not make any alterations to the combi oven. This includes removing components and adding

components that have not been expressly approved. Above all, however, make sure not to disable

any safety devices or guards.

For more information...

Related subjects

Your Combi Oven's Intended Use 19

Warning Labels on the Combi Oven 21

Overview of Hazards 23

Hazards and Safety Measures During Operation 25

Hazards and Safety Measures During Cleaning 30

Hazards and Safety Measures During Maintenance 36

Safety Devices 39

Staff and Work Area Requirements 41

3 For Your Safety

Operating Manual 18

3.2 Your Combi Oven's Intended Use

The combi oven's intended use

■

The combi oven has been designed and built exclusively for cooking a variety of food in standard-

size bakeware (

steam table pans, sheet pans, etc.). Steam, convection, and combi-steam (steam

superheated without pressure) are used for this purpose.

■

The bakeware can be made of stainless steel, ceramic, plastic, aluminum, enameled steel, or

glass. Glass bakeware must not be damaged.

■

The combi oven is intended exclusively for professional commercial use.

Ventilation

The combi oven is a commercial combination oven with integral systems for limiting the emission of

grease laden air.

This unit is UL category KNLZ listed for ventless operation. Allows operators to expand into new non-

traditional outlets. Local codes prevail as stated in NFPA 96-1994 regulations.

Limitations on use

The combi oven should not be used to heat up the following materials:

■

Dry powders or granular products

■

Readily flammable substances or objects with a flashpoint lower than 518°F,

such as readily flam‐

mable oils, fats, and plastics

■

Food in sealed cans

Staff requirements

■

The combi oven must be operated exclusively by staff meeting the specified requirements. For the

corresponding training and qualifications requirements, please refer to

'Staff and Work Area Re‐

quirements' on page 41.

■

All staff must be familiar with the risks, hazards, and rules involved in handling heavy loads.

Requirements concerning the combi oven's functional capability

■

Do not operate the combi oven unless it has been properly transported, set up, installed, and

placed into operation as indicated in the installation manual and the person responsible for placing

it into operation has confirmed this.

■

The combi oven should only be used if all safety devices and guards are present, working properly,

and correctly locked in place.

■

All manufacturer specifications concerning how to run and service the combi oven must be ob‐

served.

■

The load placed inside the combi oven must never exceed the maximum permissible loading

weight; please refer to 'The combi oven's configuration and functions

on page 15'.

Requirements concerning the combi oven's surroundings

Required combi oven surroundings

■

Ambient temperature between 40°F and 95°F

■

No toxic or potentially explosive atmospheres

■

Do not use or store gasoline or other flammable vapors, gases, or liquids in the vicinity of a combi

oven

■

Dry kitchen floor in order to reduce the risk of accidents occurring

Required installation location characteristics

■

NO fire alarms or sprinkler system directly above the unit

■

NO flammable materials, gases, or liquids above, on, under, or close to the unit

Limitations on use

■

When used outdoors, the unit must be protected from rain and wind

■

Do NOT shift or move the unit during operation

3 For Your Safety

Operating Manual 19

Prerequisites for cleaning

■

Only use the cleaning agents approved by the manufacturer.

■

Do NOT use a pressure washer to clean the unit.

■

Do NOT use a water jet to clean the outside of the unit. Do not use a water jet for anything other

than cleaning the oven cavity.

■

Do NOT use bases or acids to clean the combi oven and make sure it is not exposed to acid

fumes. The only exception is when the oven cavity and the boiler are descaled by an authorized

service company following the manufacturer's instructions.

3 For Your Safety

Operating Manual 20

Page is loading ...

Welbilt mini easyTouch UL Installation guide

This manual is also suitable for

Welbilt mini easyTouch UL Installation guide

Related papers

Other documents