iNEX Federation
i
Table of Contents
Chapter 1 — Introduction ........................................................................................ 1
1.1 System Diagram ........................................................................................... 1
Monitoring Service Registered on Federation Service ................................... 1
Backup Service Registered on Administration Service ................................... 2
Backup Service Registered on Federation Service ........................................ 2
Chapter 2 — Installation .......................................................................................... 3
2.1 Product Information ....................................................................................... 3
Package Contents ........................................................................................ 3
System Requirements ................................................................................... 3
2.2 Installation .................................................................................................... 4
Server System .............................................................................................. 4
Client System ............................................................................................... 7
2.3 Automatic Upgrade ....................................................................................... 9
Update Service Setup ................................................................................... 9
Upgrade ..................................................................................................... 10
2.4 Uninstall ...................................................................................................... 11
Chapter 3 — Getting Started ................................................................................. 13
3.1 Running Services ........................................................................................ 13
3.2 Log In ......................................................................................................... 13
3.3 System Setting............................................................................................ 14
3.4 Registering Services ................................................................................... 17
3.5 Live Video Monitoring.................................................................................. 18
3.6 Playing Recorded Video .............................................................................. 19
Chapter 4 — System Overview ............................................................................. 21
4.1 Service Manager ......................................................................................... 21
4.2 Setup .......................................................................................................... 21
4.3 Client .......................................................................................................... 22
Site List ...................................................................................................... 22
User’s Manual
ii
iNEX Federation
1
Chapter 1 — Introduction
This document describes installation and operation of iNEX Federation software, which is designed to be
used with iNEX Standard software.
The federation service allows you to monitor live video from devices registered on the administration services
and to play back recorded video saved in the recording servers that are registered on the administration services.
If a backup service is registered on a federation service, the iNEX system backs up video that is saved in
the recording servers and DVRs registered on the administration services. If monitoring services are registered
on a federation service, the iNEX system allows you to monitor events, which are notified from monitoring
services registered on the administration services, in the Client system of the federation service.
NOTES:
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/).
The software included in this product contains some Open Sources. You may obtain the complete
corresponding source code from us. See the Open Source Guide on the software CD (OpenSourceGuide\
OpenSourceGuide.pdf) or as a printed document included along with this document.
1.1 System Diagram
Monitoring Service Registered on Federation Service
User’s Manual
2
Backup Service Registered on Administration Service
Backup Service Registered on Federation Service
iNEX Federation
3
Chapter 2 — Installation
2.1 Product Information
Package Contents
Installation CD
User’s Manual
WIBU-Key (USB Dongle)
NOTES:
If a WIBU-Key is disconnected from a federation server, the federation service will not operate properly.
Stop running the federation service before connecting or disconnecting a WIBU-Key.
System Requirements
Server System
Operating System: Microsoft
®
Windows
®
XP 32-bit/Vista (Home Standard, Business, Ultimate, Enterprise),
Microsoft® Windows® 7 (Home Premium, Professional, Ultimate), Microsoft
®
Windows
®
8 (Pro,
Enterprise), Microsoft
®
Windows
®
Server 2003/2008/2012
CPU: Intel Core i5-3570 3.30GHz/Intel Xeon E3 or faster (4cores or more)
RAM: 2GB or more
VGA: AMD RadeonTM HD 2400 or NVIDIA GeForce FX5500 (AMD recommended) (1280x1024,
32bpp or higher)
Hard Disk Drive: 2 GB or more free space
LAN: Gigabit Ethernet or faster
Client System
Recommended Requirements
Operating System: Microsoft
®
Windows
®
7 64-bit (Home Premium, Professional, Ultimate) (Microsoft
®
Windows
®
8 (Pro, Enterprise) compatible)
CPU: Intel Core i5-3570 3.30GHz or faster
RAM: 4GB or more
VGA: AMD RadeonTM HD 7700 or NVIDIA GeForce GTX650 (AMD recommended) (1280x1024,
32bpp or higher)
Hard Disk Drive: 6GB or more free space
LAN: Gigabit Ethernet or faster
Minimum Requirements
Operating System: Microsoft
®
Windows
®
XP Home SP 3
CPU: Intel Core 2 Duo E7200 2.53GHz or faster
RAM: 2GB or more
VGA: AMD RadeonTM HD 2400 or NVIDIA GeForce FX5500 (AMD recommended) (1024x768,
24bpp or higher)
Hard Disk Drive: 1GB or more free space
LAN: 10/100 Mbps Ethernet or faster
User’s Manual
4
NOTE: The client system that is installed in a 32-bit operating system could have a problem that the video
is not displayed, because of a memory shortage. Ask your dealer or distributor about details about it.
FishEye Client-Side Dewarping Recommended Requirements
Operating System: Microsoft
®
Windows
®
7 64-bit (Home Premium, Professional, Ultimate) (Microsoft
®
Windows
®
8 (Pro, Enterprise) compatible)
CPU: Intel Core
TM
i7-3770 3.40 GHz or faster
RAM: 8GB or more
VGA: AMD Radeon
TM
HD 7700 or NVIDIA GeForce GTX650 or higher (1280x1024, 32bpp), multi
monitor
Hard Disk Drive: 6 GB or more free space
LAN: Gigabit Ethernet or faster
NOTE: The iNEX service (except for the video analytics service) is installed and operates in 32-bit or 64-bit
compatibility mode. The video analytics service and other iNEX programs (Client and Service Manager, etc.)
are 32-bit applications.
2.2 Installation
NOTE: Disable your PC’s Windows power saving function: Start menu → Power Options → set both Turn
off the display and Put the computer to sleep to Never (Power Options → Power Schemes tab → set both
Turn off monitor and Turn off hard disks to Never when using the Microsoft
®
Windows
®
XP operating system).
CAUTION: If an older version of iNEX software is installed on your computer, a screen
appears asking you to upgrade the software. In this case, you are required to upgrade the
software according to the instructions in the screen.
Server System
1. Insert the software CD in the federation server.
2. Run the Setup.exe file of the software CD.
NOTE: The User Account Control window might appear when using the Microsoft
®
Windows
®
Vista or later
operating system. Click Allow and install the software following the instructions.
3. Select the language in which to run the program and then click OK.
NOTES:
To properly display the selected language, your PC’s operating system should be set to support the
selected language.
To change the iNEX program’s language after the software has been installed, select Language Selector
in the iNEX → Utility folder of the Start menu before running the iNEX program.
iNEX Federation
5
4. When the following screen appears, select Install and click
Next.
5. Select Federation Service and Monitoring Service, and
click Next.
6. Designate the folder path to install the service. Clicking the
Disk Cost… button shows the available and required disk
space for each hard disk drive for the installation. Then click
Next.
7. If the service is installed on separate PCs, it is required to
enter the IP address and port number of the federation server
when installing the monitoring service. You can change the
settings in the Service Manager program after completing
installation if necessary. When the installation is complete,
the monitoring service is connected to the federation
service via the network if both services are operating.
User’s Manual
6
8. When the following screens appear, click Next.
NOTE: The following screen appears when using Microsoft
®
Windows
®
Vista or later operating systems. It is recommended
that you check the Disable WS-Discovery Windows Service
(fdPHost, FDResPub) box. If you do not check the box, the iNEX
program cannot auto-scan devices using ONVIF
TM
Conformance
protocol when scanning devices for device registration.
NOTE: The following screen appears when the port number
of the service being installed is already in use, and the screen
displays the port number that will be changed. The changed
port number will be applied when the service starts operating
after installation.
NOTE: .NET Framework and the Visual C++ Runtime Libraries are installed automatically, and it may take
some time. This installation step will be skipped if the programs are already installed on your computer.
9. Disconnect the WIBU-Key from the server if a WIBU-Key
is connected. Then install the WIBU-Key device driver
following the instructions.
iNEX Federation
7
10. When the following screen appears, click the Close button
to complete the installation.
NOTE: After successfully installing WIBU-Key device driver,
the PC restarts automatically.
11. Connect WIBU-Keys to the federation server.
Client System
1. Insert the software CD in the Client PC.
2. Run the Setup.exe file of the software CD.
NOTE: The User Account Control window might appear when using the Microsoft
®
Windows
®
Vista or later
operating system. Click Allow and install the software following the instructions.
3. Select the language in which to run the program and then click OK.
NOTES:
To properly display the selected language, your PC’s operating system should
be set to support the selected language.
To change the iNEX program’s language after the software has been installed,
select Language Selector in the iNEX → Utility folder of the Start menu before
running the iNEX program.
User’s Manual
8
4. When the following screen appears, select Install and click
Next.
5. Select Client and click Next.
6. Designate the folder path to install the Client program.
Clicking the Disk Cost… button shows the available and
required disk space for each hard disk drive for the installation.
Then click Next.
7. When the following screens appear, click Next.
iNEX Federation
9
NOTE: The following screen appears when using the Microsoft
®
Windows
®
Vista or later operating system. It is recommended
that you check the Disable WS-Discovery Windows Service
(fdPHost, FDResPub) box. If you do not check the box, the iNEX
program cannot auto-scan the devices that use the ONVIF
TM
Conformance protocol when scanning the devices for device
registration.
NOTE: .NET Framework and the Visual C++ Runtime Libraries are installed automatically, and it may take
some time. This installation step will be skipped if the programs are already installed on your computer.
8. When the following screen appears, click the Close button
to complete the installation.
2.3 Automatic Upgrade
You can upgrade all services automatically by running the update service and designating the installation
file of the software version to upgrade.
Update Service Setup
1. Run the Service Manager program in the
federation server.
2. Click Option menu and select Update Package and then
select Update Service tab. Check the Use box and enter
the IP address and port number of the update server. Refer
to the iNEX Standard User’s Manual for details about the
installation of the update service.
User’s Manual
10
Upgrade
1. Go to the Start Menu in the update server → Click iNEX → Run the iNEX Update Manager program.
Option: Designates the upgrade file or sets up the port number of the update server.
− Update Package: Designates the folder path of the upgrade installation file.
− Port Setup: Sets the port number of the update server.
Log: Selecting Show Log allows you to check and search the system log.
Setting up the time range of the log and clicking
the Search button displays the log information.
Selecting First displays from the oldest log
entries regardless of date. Selecting Last
displays to the newest log entries regardless of
date.
iNEX Federation
11
2. Click the Option menu and select Update Package.
Click the button and designate the folder path of the
upgrade installation file. Click the OK button.
3. Click the Update button at the bottom of the iNEX Update Manager screen. For a Client system with
no iNEX service program installed, clicking the Update button upgrades the Client program. For server
systems, each service connects to the update service periodically and automatically upgrades if necessary.
2.4 Uninstall
1. Stop running the service and Client program first.
NOTE: The iNEX software might not uninstall correctly if you uninstall it while the services or Client program
is running.
CAUTION: The iNEX software should be uninstalled following the procedures below. If you
delete the installation folder manually, the iNEX software cannot be uninstalled or reinstalled.
2. Go to the Start Menu and click iNEX. Click Uninstall iNEX.
NOTE: You can uninstall the software by using the software CD.
Insert the software CD in the federation server or Client PC and
run the Setup.exe file. Select Remove and click Next.
User’s Manual
12
3. Click Yes when the following screen appears.
4. Click the Remove All or Do not remove button when the following screen appears. Clicking the
Remove All button deletes all saved data including previous settings in the system. Clicking the Do
not remove button uninstalls the software without deleting any saved data in the system and keeps all
saved data in the system.
NOTE: The deleted data cannot be restored once the data is deleted.
5. Click the OK button to complete the uninstall process.
iNEX Federation
13
Chapter 3 — Getting Started
3.1 Running Services
When the federation service installed, the service runs automatically. You can
also start or stop running the service manually. Go to the Start Menu → Click
iNEX → Run the Service Manager program.
Check the status of the service. If the service is not
listed as Working under Status, start the service
manually. Refer to the iNEX Standard User’s Manual
for details about the Service Manager program.
3.2 Log In
You are required to log in to the federation service as follows when running Setup and Client programs.
Go to the Start Menu → Click iNEX → Run the iNEX Setup or iNEX Client program and enter login
information.
Site Name: Select the federation service to connect to from the list. Select Local Host as the default
setting if the federation service is running in the current system. You can add other federation services to
the list or modify information about the federation service in the list by clicking the button at the right.
User’s Manual
14
− Site Name, Service Address, Service Port: Designate the name
of the federation service and enter the IP address and port number
of the federation server (default: 11000).
User ID, Password: Enter your user ID and password. The default user ID is admin and default
password is 12345678. You can change the user ID and password in the User menu. Refer to the iNEX
Standard User’s Manual for details.
Remember my ID on this computer: Check the box if you want to save your ID for logging on.
Restore last Live sessions: Check the box if you want to restore the previous live monitoring sessions
in the Live panel of the Client program (supported only for the Client program).
3.3 System Setting
Run the Setup program and set up the federation server.
Click the (System Setup) button to display the system setup screen.
iNEX Federation
15
FEN
Server Address, Server Port: Enter the IP address
(domain name) and port number of the FEN server
that the administration server to be registered on the
federation server is registered.
SSL
Use SSL: Allows you to enhance the security of data
transferred between services of the iNEX program
by using the SSL (Secure Sockets Layer) protocol.
Using the SSL function might cause congestion in
the federation server depending on the security level.
Log in the iNEX program again after you change the
setting. When the setting is changed, all services that
are currently connected to the federation server
reconnect, and the iNEX Setup and iNEX Client
programs are logged out.
Email
Enter the SMTP server information.
SMTP Server, Port: Enter the email address and port
number of the SMTP server. Select Use SSL/TLS
if the SMTP server requires SSL (Secure Sockets
Layer) authentication.
Use Authentication: Select and enter the ID and
password if the SMTP server requires user
authentication.
Sender: Enter the sender’s email address.
Email Test: Click the button to test if the SMTP
server information is correct.
User’s Manual
16
Notification
The iNEX system can notify service disconnection by
sending an email.
Recipient: Clicking the button at the bottom
allows you to enter email addresses of the recipients.
Notification service connection: Sends an
email to the recipients when any services are
disconnected from the federation service.
Notification of Disk Almost Full: Sends an
email to the recipients when the system detects
that the defined percentage of the hard disk storage
space is being used.
Event
Set up the Event Management schedule option.
Event Schedule: Enables or disables the Event
Management menu. Refer to 4.2 Setup (p. 21)
for details about the Event Management menu.
− Use: Notifies you of events based on the settings
in the Event Management menu.
− Not Use: Notifies you of events based on the
settings of the following Event Management
options.
Event Management
− Monitoring Devices: Notifies of events detected at
the currently monitoring cameras in the Live or
Map panel.
− All Devices: Notifies of events detected at cameras
registered on the federation service.
Event Dwell Time: The federation service does not notify you of the same type of events detected for the
same camera within the specified period of time after the first event occurs.
Instant Event Filtering: The administration service does not notify Client of the selected event even if
the event is detected, except for Event Recording and Event Management schedule.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
