Addonics Technologies ADEXC34CB Installation guide

Brand
Addonics Technologies
Model
ADEXC34CB
Type
Installation guide
ADDONICS TECHNOLOGIES
Model: ADEXC34CB
Installation Guide
Front View
Power LED: The power LED lights up when the adapter is
plug to an Express Card 34 slot with or
without a Cardbus device connected to it.
1. Insert the Cardbus device to the Cardbus slot on the
adapter.
2. Slide the Express Card 34 Cardbus adapter to the
Express Card 34 slot on the laptop.
Note: The Express Card 34 Cardbus adapter does not
require a driver. It is the Cardbus device you
connect to the adapter that require drivers
3. Follow the onscreen instructions to install the drivers of
the newly installed Cardbus device.
Hot Swap Feature:
If the Cardbus device supports hotswap, to enable this
feature, you have to unplug the adapter with the Cardbus
device still connected to the adapter. Removing just the
Cardbus device won’t hotswap the device.
P2 Installation:
The P2 card requires a special procedure for installation.
The video instructions on how to correctly install a P2 can be
downloaded at the following locations:
Part 1
http://www.addonics.com/support/download/video/ADEXC34
CB-01.avi
Part 2
http://www.addonics.com/support/download/video/ADEXC34
CB-02.avi
TECHNICAL SUPPORT
Email: http://www.addonics.com/sales/query/
Internet: http://www.addonics.com
Technical Support (8:30 am to 6:00 pm PST)
Phone: 408 573-8580
Email: http://www.addonics.com/support/query/
Express Card 34
CardBus slot
Power LED
  • Page 1 1

Addonics Technologies ADEXC34CB Installation guide

Brand
Addonics Technologies
Model
ADEXC34CB
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents