Place your Zona Speakers and plug them in to a power outlet. They will
link up to the Transmitter and your wireless surround sound is ready.
Follow your receiver’s instructions to set the volume, and enjoy!
(You can also adjust the volume with the included remote control.)
CAUTIO N
R/L Surround Pre-Out
Transmitter
18151 SW Boones Ferry Road, Por tland OR 97224
-
888 .880.8992
An electronic copy of this manual can be downloaded from www.aperionaudio.com.
© 2010 Aperion Audio. All Rights Reserved.
Carefully Remove the Speakers and Package Contents:
• 2 Aperion Zona Powered Speakers with built-in wireless receiver
• 1 Wireless Transmitter • 1 Remote Control • 2 Power Adapters
• 1 USB Extension Cable • 1 1/8” Stereo Mini to 1/8“ Stereo Cable
• 1 1/8” Stereo Mini to L/R RCA Cable
• 1 USB Wall Adapter • Rubber Bumpers
IMPORTANT SAFETY INSTRUCTIONS
Caution
To reduce the risk of electric shock, do not remove the amplifier. No user-serviceable parts are inside. Re-
fer servicing to qualified service personnel.
The exclamation point symbol is intended to alert user to the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the speakers.
The lightning flash with arrowhead symbol is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
1. Read Instructions - All safety and operating instructions should be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Water and Moisture - The product should not be used near water - for example, near a bathtub, wash-
bowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool or the like.
5. Ventilation - The product should be situated so that its location or position does not interfrere with its
proper ventilation or the movement of its parts.
6. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves,
or other products that produce heat.
7. Power Sources - The product should be connected to a power supply only of the type described in the
operating instructions or as marked on the product.
8. Power-Cord Protection - Power- supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point at which they exit from the product.
9. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled
on to the enclosure.
10. Servicing - The user should not attempt to service the product beyond what is described in the operat
-
ing instructions. All other servicing should be referred to qualified service personnel.
11. Lightning - For added protection for the product during a lightning storm or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet.
12. Overloading - Do not overload wall outlets, extension cords or integral convenience receptacles as this
can result in a risk of fire or electric shock.
C A U TIO N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures: reorient or relocate the receiving antenna, increase the separation between the
equipment and receiver, connect the equipment into an outlet on a circuit different from that to which
the receiver is connected, or consult the dealer or an experienced radio/TV technician for help.
CAUTION
:
Any changes or modifications not expressly approved by the grantee of this device could void
the user's authority to operate the equipment.