Altronix ALTV244 provides 24VAC or 28VAC power to CCTV cameras, heaters, and other video accessories via four (4) fuse or PTC protected outputs. The secondary fuse is rated at 5A/250V and features an AC power LED, power ON/OFF switch, and spare fuses. Enclosure dimensions are 8.5" x 7.5" x 3.5" (215.9mm x 190.5mm x 88.9mm).
Altronix ALTV244 provides 24VAC or 28VAC power to CCTV cameras, heaters, and other video accessories via four (4) fuse or PTC protected outputs. The secondary fuse is rated at 5A/250V and features an AC power LED, power ON/OFF switch, and spare fuses. Enclosure dimensions are 8.5" x 7.5" x 3.5" (215.9mm x 190.5mm x 88.9mm).
ALTV244 Series
CCTV Power Supplies
Installation Guide
Models Include:
ALTV244 ALTV244CB
- 24VAC @ 4A (100VA) - 24VAC @ 4A (100VA)
or 28VAC @ 3.5A. or 28VAC @ 3.5A.
- Four (4) Fuse Protected Outputs. - Four (4) PTC Protected Outputs.
ALTV244175 ALTV244175CB
- 24VAC @ 7.25A (175VA) - 24VAC @ 7.25A (175VA)
or 28VAC @ 6.25A. or 28VAC @ 6.25A.
- Four (4) Fuse Protected Outputs. - Four (4) PTC Protected Outputs.
ALTV244300 ALTV244300CB
- 24VAC @ 12.5A (300VA). - 24VAC @ 12.5A (300VA).
or 28VAC @ 10A. or 28VAC @ 10A.
- Four (4) Fuse Protected Outputs. - Four (4) PTC Protected Outputs.
For models with the factory installed 3-wire line cord add suffix “3”, e.g. ALTV2443003.
Rev. 020705
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
Overview:
These Altronix CCTV Power Supplies provide 24VAC or 28VAC distributed via four (4) fuse or PTC protected outputs
for powering CCTV cameras, heaters and other video accessories.
Four (4) Output ALTV244 Reference Chart:
Altronix
Model Number
Total
Output
Current
Output
Voltage
Number of
Outputs
PTC Protected
Outputs
Fuse Protected
Output
Output
Current
(max per
output)
Main
Fuse
Ratings
115VAC
50/60Hz
Input
Current
ALTV244
4A 24VAC
4
-
P
3.5A
5A/250V 0.9A
3.5A 28VAC
ALTV244CB
4A 24VAC
P
- 2.5A
3.5A 28VAC
ALTV244175
7.25A 24VAC
-
P
3.5A
10A/250V 1.5A
6.25A 28VAC
ALTV244175CB
7.25A 24VAC
P
- 2.5A
6.25A 28VAC
ALTV244300
12.5A 24VAC
-
P
3.5A
15A/32V 2.7A
10A 28VAC
ALTV244300CB
10A 24VAC
P
- 2.5A
10A 28VAC
Specifications:
Input:
• 115VAC, 50/60Hz.
Output:
• Four (4) fuse or PTC protected outputs.
• 24VAC or 28VAC supply current.
• Outputs are rated @ 3.5A (fused) or 2.5A (PTC).
• Surge suppression.
Features:
• Secondary fuse rated @ 5A/250V.
• AC power LED.
Features (cont’d):
• Power ON/OFF switch.
• Spare fuses provided.
(all models w/primary and/or secondary fuses).
Enclosure Dimensions:
• ALTV244 and ALTV244CB:
8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm).
• ALTV244175, ALTV244175CB, ALTV244300, and
ALTV244300CB:
8.5” x 7.5” x 3.85” (215.9mm x 190.5mm x 97.9mm).
Installation Instructions:
1. Mount unit in the desired location. Mark and predrill holes in the wall to line up with the top two keyholes in the
enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding. Place the enclosure’s
upper keyholes over the two upper screws; level and secure. Mark the position of the lower two holes. Remove the
enclosure. Drill the lower holes and install the fasteners. Place the enclosure’s upper keyholes over the two upper
screws. Install the two lower screws and make sure to tighten all screws (Enclosure Dimensions, pg. 7,8).
Secure enclosure to earth ground.
2. Slide switch SW1 to the OFF position (Models ALTV244 and ALTV244CB) (Fig. 1, pg. 4).
Turn main switch on all other models to the OFF position.
3. All units are factory set for 24VAC operation.
For 28VAC operation adjust unit prior to mounting and applying power as follows: Change the wire position so that
the black wire [28V] is connected to the terminal marked [P] and the yellow wire [24V] is connected to the terminal
marked [S].
4. Connect AC power to the black and white flying lead of the transformer (Fig. 1, pg. 4).
Units with line cord installed skip Step #4.
Use 18 AWG or larger for all power connections (Battery, AC output).
5. Measure output voltage before connecting devices. This helps avoiding potential damage.
- 2 - ALTV244series
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting the
output voltage.
6. Connect devices to the terminals marked [1P - 1N] through [4P - 4N] on PD4/PD4CB board, carefully observing
correct polarity (Fig. 1, pg. 4).
7. Slide switch SW1 to ON position (Models ALTV244 and ALTV244CB), (Fig. 1, pg. 4).
Turn main switch on all other models to the “RESET” (ON) position.
8. Green LED will illuminate when unit is powered.
9. Upon completion of the wiring, secure enclosure door with screws (supplied).
Caution: Equipment to be installed / serviced by authorized / trained personnel only.
Shut branch circuit power before installing / servicing equipment.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
This installation should be made by qualified service personnel and should conform to the National
Electrical Code and all local codes.
Terminal Identification:
PD4/PD4CB - Distribution Module
1P - 4P AC output.
1N - 4N AC output.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient
magnitude to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: To reduce the risk of electric shock do not open enclosure. There are
no user serviceable parts inside. Refer servicing to qualified service personnel.
ALTV244series - 3 -
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
ALTV244
XFMR
24VAC or 28VAC
fused output 1
(Follow same procedure
using terminals 2P & N
through 4P & N fused
outputs 2 through 4)
115 VAC input
50/60 Hz,
0.9 amps
White Lead
Black Lead
F2 F4
ON
INPUT
OFF
JMP1
1P 1N 2P 2N 3P 3N 4P 4N
LED
SW1
MAIN
FUSE
N P S
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
F3F1
Voltage Selection
Configuration
N P S
24VAC
Output
(Yellow) (Black)
N P S
ALTV244CB
28VAC
Output
(Black) (Yellow)
XFMR
24VAC or 28VAC
circuit breakered output 1
(Follow same procedure
using terminals 2P & N through
4P & N circuit breakered
outputs 2 through 4)
115 VAC input
50/60 Hz,
0.9 amps
White Lead
Black Lead
F1 F2 F3 F4
ON
INPUT
OFF
1P 1N 2P 2N 3P 3N 4P 4N
LED
MAIN
FUSE
N P
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
S
SW1
JMP1
- 4 - ALTV244series
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
ALTV244175
XFMR
White Lead
24VAC or 28VAC fused output 1
(Follow same procedure
using terminals 2P & N
through 4P & N
fused outputs 2 through 4)
INPUT
1P 1N 2P 2N 3P 3N 4P 4N
LED
MAIN
FUSE
115VAC input
P
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
S
Power
Switch
Black
Lead
50/60 Hz,
1.5 amps
N
Voltage Selection
Configuration
F2 F4F3F1
N P S
24VAC
Output
(Yellow) (Black)
ALTV244175CB
F1 F2 F3 F4
INPUT
1P 1N 2P 2N 3P 3N 4P 4N
LED
MAIN
FUSE
N
P
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
S
N
XFMR
White Lead
24VAC or 28VAC circuit breakered 1
(Follow same procedure
using terminals 2P & N
through 4P & N
fused outputs 2 through 4)
Power
Switch
Black
Lead
115VAC input
50/60 Hz,
1.5 amps
N P S
28VAC
Output
(Black) (Yellow)
ALTV244series - 5 -
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
ALTV244300
Transformer
underneath
power supply
board
Power
Switch
White Lead
Black Lead
F1 F2 F3 F4
INPUT
1P 1N 2P 2N 3P 3N 4P 4N
N
LED
P
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
S
MAIN
FUSE
Voltage Selection
Configuration
N P S
24VAC
Output
(Yellow) (Black)
ALTV244300CB
Transformer
underneath
power supply
board
Power
Switch
F1 F2 F3 F4
INPUT
1P 1N 2P 2N 3P 3N 4P 4N
LED
MAIN
FUSE
P
1P, 2P, 3P, 4P = FUSED OUTPUTS
1N, 2N, 3N, 4N = COMMON OUTPUTS
S
N
White Lead
Black Lead
N P S
28VAC
Output
(Black) (Yellow)
- 6 - ALTV244series
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
Enclosure Dimensions (H x W x D) for:
• ALTV244
• ALTV244CB
8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm)
1.25”
(31.75mm)
1.25”
(31.75mm)
1.25”
(31.75mm)
1.125”
(28.575mm)
1”
(25.4mm)
1”
1” 5.25”
6.05”
(153.67mm)
6.05”
(153.67mm)
3.5”
(88.9mm)
3.5”
(88.9mm)
7.25”
(184.15mm)
2”
(50.8mm)
2”
(50.8mm)
8.125”
(206.375mm)
0.6”
(15.24mm)
1”
(25.4mm)
1”
(25.4mm)
0.6”
(15.24mm)
0.6”
(15.24mm)
1.125”
(28.575mm)
0.6”
(15.24mm)
3.625”
(184.15mm)
(25.4mm) (133.35mm)
(25.4mm)
ALTV244series - 7 -
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
Enclosure Dimensions (H x W x D) for:
• ALTV244175
• ALTV244175B
• ALTV244300
• ALTV244300CB
8.5” x 7.5” x 3.85” (215.9mm x 190.5mm x 97.9mm)
3.63”
(92.2mm)
7.25”
1.25”
(31.75mm)
3.85”
(97.79mm)
(184.15mm)
0.6”
1”
(25.4mm)
1”
(25.4mm)
8.13”
(206.5mm)
3.85”
1.25”
(31.75mm)
1.25”
(31.75mm)
(97.79mm)
7.25”
(
184.15mm
)
1”
(25.4mm)
1.75”
(44.45mm)
8.13”
(206.5mm)
1”
(25.4mm)
1”
(25.4mm)
1”
(25.4mm)
3.85”
(97.79mm)
1”
(25.4mm)
1.25”
(31.75mm)
(15.24mm)
0.6”
(15.24mm)
0.6”
(15.24mm)
0.6”
(15.24mm)
0.9”
(22.86mm)
0.9”
(22.86mm)
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
web site: www.altronix.com, e-mail: [email protected]. Lifetime Warranty, Made in U.S.A.
II1ALTV244Series I08O
MEMBER
- 8 - ALTV244series
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Altronix ALTV244 provides 24VAC or 28VAC power to CCTV cameras, heaters, and other video accessories via four (4) fuse or PTC protected outputs. The secondary fuse is rated at 5A/250V and features an AC power LED, power ON/OFF switch, and spare fuses. Enclosure dimensions are 8.5" x 7.5" x 3.5" (215.9mm x 190.5mm x 88.9mm).
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Altronix BC100 Datasheet
-
Altronix ALTV244 Installation Manuals
-
-
-
Altronix PD4 Installation guide
-
Altronix OLS20E User manual
-
-
-
-
Altronix VertiLine8 Series Owner's manual
Other documents
-
Revo REP3DC12-8-10 Installation guide
-
-
i3 International PS-AC25A18U Installation guide
-
A1 Security Cameras VZ-WM11 Installation guide
-
Dahua A83ABBZ Quick start guide
-
Ubiquiti UAP-AC-M-PRO Quick start guide
-
-
PACOM PAC-24RM1616 User manual
-
-
