Geemarc VISO 15 User guide

Type
User guide

Geemarc VISO 15 is a versatile clock that offers a wide range of features to meet your timekeeping needs. With its perpetual calendar, it can display the date and time up to the year 2099. You can also choose from 14 different languages for the display, ensuring that you can easily understand the information.

The VISO 15 is also equipped with radio control, which means it automatically synchronizes with the DCF77 time signal to provide you with the most accurate time possible. The radio control range extends up to 1500km from the transmitter, so you can be confident that you will always have the correct time, even if you travel.

Geemarc VISO 15 is a versatile clock that offers a wide range of features to meet your timekeeping needs. With its perpetual calendar, it can display the date and time up to the year 2099. You can also choose from 14 different languages for the display, ensuring that you can easily understand the information.

The VISO 15 is also equipped with radio control, which means it automatically synchronizes with the DCF77 time signal to provide you with the most accurate time possible. The radio control range extends up to 1500km from the transmitter, so you can be confident that you will always have the correct time, even if you travel.

123
UserManual
VISO15–DCF
(MainlandEuropeNotUK)
1.Features
‐EasytoReadandUnderstandTimedisplay
‐PerpetualCalendarUptoYear2099
‐Daysoftheweek&Monthin14differentlanguages
2.UnitAppearance
PartALCD
A1: DayoftheWeek
A2:RadioControlIcon
A3:Time
A4:Periodoftheday
A5:AM/PM
A6:Date
A7:Month
A8:Year
PartBButton PartCStructure
B1:“SET” Button
B2:”Button
B3:”Button
B4:Poweradaptor
C1:backlightsensor
C2:HangingHole
C3:BatteryCompartment
C4:Stand
3.Gettingstarted:
z Plug the power adaptor into the wall socket and into
thebackofyourclockin(B4)
z Openthebatterycompartment(C3).
z Insert 3 x AA size alkaline batteries observing polarity
[“+”and“–“marks].Youshouldhereaclick”sound,it
indicatesthatyouhaveplacedthebatteriescorrectly.
z Replacethebatterycompartmentcover.
z Thebatteriesareonlyusedincaseofpowerfailure.
z Youcanselectthelevelofbrightnessofthebacklightby
placingyourhandonthebacklightsensor(C1).Thereare
fourlevels(High,middle,lowandOFF).
In NIGHT mode, the brightness is set on LOW and the
HIpositioncan’tbeselected.
4.Setting
4.1Automaticclocksetting
z WhenyouconnectyourpoweradaptorortheAlkaline
batteries,yourclockasksyoutoselectyourlanguage.
Youha v ethechoice betweenthefollo wing14language s: 
English,Français,Deutsch,Nederlands,Italiano,Espanol,
Portugues,Swenska,Norsk,Dansk,Suomi,Polski,Ceska
andMagyar.
z Pressthe (B3)or (B2) buttonto chooseyour
languageandthenpresstheSET(B1)button
z Pressthe (B3)or (B2) buttonto chooseyour
type of display and then press the SET (B1) button to
exit.
Youcanchoose betweenfourtypesofdispla y(seepictur e s)
a)DP1:Day+Periodoftheday+Time
b)DP2:Day
+Date+Time
c)DP3:Day+Date+Year
d)DP4:Inthismode,youcanselectboth(DP1, DP2or
DP3)mode,theclockwillthenswitchbetw eenth e thir d .
By default,theswitchwill happenevery 5 secondsbut
you have the possibility to increase
the time period
betweentwoswitches(upto60seconds).
z After having set the language and the type of display,
theclock automatically starts to scanfortheDCFtime
signal. The Radio Control Icon
(A2) will then
appearonthescreen.
(A2)flashes
Indicatesthattheclockisnow
receivingtheDCFsignal
(A2)stayson
Indicatesthesignalhas
successfullybeenreceived
(A2)disappears
Indicatesthereceptionofthe
signalhasfailed
z Theclockautomaticallysynchro nizeswiththeDCFradio
signal every day at 3.00 amto maintain accurate time
keeping. If synchronization with the DCF radio signal
fails,the
iconwilldisappearfromthescreen.The
clock will then reattempt to synchronize with the DCF
radiosignalat4.00and5.00am.
z Youcanmak etheclockscanfortheradiosignalbyholding
the button (B3) for 3 seconds. Each attempts at
gettingthesignaltakesseveralminutes.Ifthereception
fails, the scanning stops momentarily (the
icon
disappears)andthenstartsag ainonthenextclockhour.
E.g. if reception failed at 8:20a.m. the clock will scan
againforthesignalat9:00a.m.
z TostopthescanningfortheDCFradiosignal,holdthe
button(B3)for3seconds.
Day
+
Periodof
theday
+
Time
Day
+
Date
+
Time
Day
+
Date
+
Year
456
4.2ManualclockSetting:
4.2.1:Settingoftheperiodoftheday
Note:
‐AllSettingmodeswillautomaticallyexitafter15seconds
ifnoadjustmentismade.
‐(Pressandholdthe(B3)or(B2)but ton,toreach
thedesiredvaluemorequickly).
z If the period of the day is not indicated on the screen
(DP1),pr esstheSET (B1 )buttononcetomak eitappear.
z Settingbydefault:
MORNING=7:0112:00EVENING=17:01‐23:00
AFTERNOON=12:0117:00 NIGHT=23:01‐7:00
z Press and hold the SET (B1) button until the word
MORNING”flashes.
z Setthecorrecthourforthisperiodbypressingthe
(B3)or(B2)buttonsthenpresstheSET(B1)button
tosave.
z “AFTERNOO Nnow blinks,setthe correcthourforthis
period by pressing the (B3) or (B2) buttons
thenpresstheSET(B1)buttontosave.
z “EVENING” now blinks, set the correct hour for this
period by pressing the (B3) or (B2) buttons
thenpresstheSET(B1)buttontosave.
z “NIGHTnowblinks,setthe correcthourforthisperiod
by pressing the (B3) or (B2) buttons then
presstheSET(B1)buttontosaveandexit.
4.2.2:Settingthetimezoneandclock(date,year,
hourandmonth)
If the day and the year are not indicated on the screen
(DP3),presstheSET(B1)buttontomakethemappear.
z PressandholdSET(B1)buttonuntil00blinks.Pressthe
(B3)or(B2)buttonstoselectthecorrecttime
zonethenpressSET(B1)buttontosave.00bydefault.
z Now the year blinks. Press the (B3) or (B2)
buttons to select the correct year then press SET (B1)
buttontosave.
z Nowthemonthblinks.Pressthe(B3)or(B2)
buttonstoselectthecorrectmonththenpresstheSET
(B1)buttontosave.
z Now the date blinks. Press the (B3) or (B2)
buttons to select the correct date then press the SET
(B1)buttontosave.
z Nowthehoursdigitsblink. Pressthe(B3)or
(B2) buttons to set the hour then press the SET (B1)
buttontosave.
z Now the minutes’ digits blink. Press the (B3) or
(B2)buttonstosettheminutesthenpressSET(B1)
buttontosaveandexit.
4.1.3Settingthelanguageanddisplaytype
z Innormal settingpattern, pressand holdthe (B2)
buttonuntilyouhavethelanguagesetblinkingPress
(B3) or (B2) button to select the correctlanguage
thenpresstheSET(B1)buttontosave.
Note:Youhav ethechoicebe tween
thefo llowing14languages:
English,Français,Deutsch,Nederlands,Italiano,Espanol,
Portugues, Swenska, Norsk, Dansk, Suomi, Polski, Ceska
andMagyar.
z Pressthe(B3)and(B2)buttonstoselectyour
languagethenpresstheSET(B1)button
z Pressthe(B3)and(B2)buttontoselectyour
displaytypethenpressSET(B1)buttontoexit
a)DP1:Day+Periodoftheday+Time
b)DP2:Day+Date+Time
c)DP3:Day+Date+Year
d)DP4: In this mode,you can select both(DP1, DP2 or
DP3)mode,theclockwillthenswitchbetw eenth e thir d .
Bydefault,theswitchwillhappenevery5secondsbutyou
have the possibility to increase the time period between
twoswitches(upto60seconds).
5.Precautions
z The clock loses its time informationwhen the power
adaptorisremovedandyouhav eno tinserte dthealk ali ne
batteries.
z Do not expose it to direct sunlight, heavy heat, cold,
highhumidityorwetenvironments
z Never clean the device using abrasive or corrosive
materials or products. Abrasive cleaning agents may
scratchplasticpartsandcorrodeelectroniccircuits.
6.Radiocontrolledtimereceptionrange:
upto1500kmfromDCF77transmitter.
7.Guarantee
From the moment your Geemarc product is purchased,
Geemarcguarantee it for theperiodof two years.During
this time, all repairs or replacements (at our option) are
freeofcharge.Shouldyouexperienceaproblemthencontact
our helpline or visit our website at www.geemarc.com.
The guarantee does not
cover accidents, negligence or
breakagestoanyparts.Theproductmustnotbetampered
with or taken apart by anyone who is not an authorised
Geemarcrepresentative.TheGeemarcguaranteeinnoway
limitsyourlegalrights.
IMPORTANT:YOURRECEIPTISPARTOFYOURGUARANTEE
ANDMUSTBERETAINEDAND
PRODUCEDINTHEEVENTOF
AWARRANTYCLAIM.
CE Declaration: The declara tion of conformity may be
consultedatwww.geemarc.com
8.Recyclingdirectives
TheWEEE (Waste Electricaland Electronic Equipment) has
beenputinplacefortheproductsinendoflifearerecycled
inthebestway.
Whenthisproductis outof order,please donot putit in
yourdomesticwastebin.
Pleaseuseoneofthefollowingdisposaloptions:
‐
Removethebatteriesanddeposittheminanappropriate
WEEEskip.
DeposittheproductininaappropriateWEEEskip.
‐Orhandtheoldproducttotheretailer.Ifyoupurchasea
newone,theyshouldacceptit.
Forproductsupportandhelpvisitourwebsiteat
www.geemarc.com
telephone01707387602
UGViso15_DCF(VDE)_En_A4_V1.0
  • Page 1 1
  • Page 2 2

Geemarc VISO 15 User guide

Type
User guide

Geemarc VISO 15 is a versatile clock that offers a wide range of features to meet your timekeeping needs. With its perpetual calendar, it can display the date and time up to the year 2099. You can also choose from 14 different languages for the display, ensuring that you can easily understand the information.

The VISO 15 is also equipped with radio control, which means it automatically synchronizes with the DCF77 time signal to provide you with the most accurate time possible. The radio control range extends up to 1500km from the transmitter, so you can be confident that you will always have the correct time, even if you travel.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI