Geemarc VISO5 User guide

Type
User guide
123
UserManual
Viso5–MSF(UK)
!!!PLEASEREFERTOOURWEBSITE:WWW.GEEMARC.COM
FORANUPTODATEUSERGUIDE,ASTHEREMAYBE
IMPORTANTUPDATESANDCHANGESYOUNEEDTOBE
AWAREOF!!!
1.Features
‐EasytoReadandUnderstandTimedisplay
‐PerpetualCalendarUptoYear2099
‐14languages(usertoselectatsetupstage).
‐Dayoftheweek,month,stageofthedayandtime
modes
2.UnitAppearance
PartALCD PartBButton
A1:Da yofWeekorMonth
A2:Stageoftheday
A3:Photoframe
A4:RadioControlIcon
B1:“SET/
”Button
B2:Button
B3:Button
PartCStructure
C1:HangingHole
C2:BatteryDoor
C3: Stand
3.Insertapicture:
z Remove the temporary picture with dry protection by
slidingupwards.
z Insertyourpicturewhichneedstobe15x11cmandslide
down.
4.TOBEGIN:
z OpenthebatteryCover(C2).
z Insert2xAAAsizebatteriesobservingpolarity(+and–).
z Replacebatterycompartmentcover(C2).
4.1Tobegin
To begin, you have 1 minute to arrange the first setting.
The clock displays English, press (B2) or (B3) to
selectyourlanguageandpressSET/
(B1)tovalidate,
Press(B2)or(B3)tochoosethemodeofdisplay
setandpressSET/
(B1)tovalidate(seenote).
If you don’t press any keys, after 1 minute the Viso5 will
launchthea u to maticclocksetting.
Note:PlacetheVISO5nearawindowfortheclockto
automaticallyset.
DP1displaysthedayoftheweek
andthe2
nd
linethepartoftheday.
DP2displaystheMonthandthe2
nd
linethedateandtheyear.
DP3displaysthedayofweekand
the2
nd
linethetime.
DP4 rotates between all 3 displays and you can set the
timethateachdisplayisshown.Seechapter4.3.Cforfull
instructions.
4.2RadioControlledTime:
z The clock automatically starts to scan the MSF time
signal in the first10 minutes.(RadioControl Icon
(A4)flashesonLCD).
(A4)flashing
IndicatestheMSF signalis
beingreceived
(A4)Continuous
Indicatessignalreceived
successfully
(A4)Icondisappears
Indicatessignalreceptionfailed
z Theclockcanbesettoscantheradiosignalmanuallyby
holding ”(B3) button for 3 seconds
. Each reception
takes around several minutes. If the reception fails,
scanningstops.(“
”(A4)onLCDdisappear)andrepeats
againon nextfullhour.E.g.scanningfailedat8:20a.m.It
willscanagainat9:00a.m.
z Summer and winter time change (and reverse) is set
automatically.
4.3TimeSetting
Youmustwait10mintochecktheclockissetautomatically
(see chapter 4.2) before you proceed to the setting, press
and hold ”(B3) for 3 seconds to turn off the automatic
clocksetting(icon
(A4)disappears).
(a)DateandTimeSetting
Note that during the setting situation, a long press
orcanacceleratewhilescrollingthroughthesettings.
456
z In standby mode, press button SET”(B1) to display the
timeonthefirstline.
z To change the time format, press (B3) to pass
betweenAM/PMor24Hdisplay
z PressbuttonSET(B1)for 2secondsto enterdateand
timesetting,
z SettheTIMEZONE(2),pr ess(B2)or(B3)toset
thetimezoneandpressbuttonSET(B1)toconfirm.
z Set the YEAR, press (B2) or (B3) to set the
YEARandpre s sbuttonSET(B1)toconfirm.
z Set the MONTH, press (B2) or (B3) to set the
MonthandpressbuttonSET(B1)toconfirm.
z Set the DAY, press (B2) or (B3) to set the Day
andpressbuttonSET(B1)toconfirm.
z SettheHOUR,press(B2)or(B3)tosetthe
HourandpressbuttonSET(B1)toconfirm.
z Set the MINUTE, press ”(B2) or ”(B3) to set the
MinuteandpressbuttonSET(B1)toconfi rmandexit.
Note:
(1) All Setting modes wi ll automatically exit in around 15
secondswithoutanyadjustment.
(2)ForTimeZone:IfyoudonotreceiveaRCMSF
frequency
signal,thetimezoneshouldbesetto0.TimeZoneisused
in countries which can receive the MSF frequency signal
but the time zone is different from German Time (i.e.
MT+1).
(b)StageoftheDayset
Note:Defaultthetimeto
thestageoftheday:
z Instandbymode,pressbuttonSET”(B1)for2secondsto
enterstageofthedaysetting.
z SetthehouroftheMO RNINGandpres s”(B2)or”(B3)
tosettheHOURandpressbuttonSET”(B1)toconfirm.
z Set the hour of the AFTERNOON and press ”(B2)
or”(B3)tosettheHOURandpressbutton SET”(B1)
toconfirm.
z SetthehouroftheEVENINGandpress”(B2)or”(B3)
tosettheHOURandpressbuttonSE T (B1)toconfirm.
z SetthehouroftheNIGHTinpress ”(B2) or ”(B3)
tosettheHOURandpressbuttonSET(B1)toconfirm.
(c)Languageset&Displayset
Instandby mode,pressbu tton ”(B2)for2secondsto
enterth elanguagesetting,press””(B2)or”(B3)to
select you r language (14 languages avai l a ble : English,
French, German, Netherland, Italian, Spanish, Portuguese,
Swe dish,Norwegian,Danish,Finnish,Polish,Czech,Hungarian),
pressSET”(B1)tocon f irm.
z Afterthelanguageisconfirmed, itwillautomatically jump
to the display mode. Press
”(B2) or
”(B3) to select
DP1/ D P 2/ D P3orDP4,pressSET(B1)toconfirm.
Note: For DP 4, user can set how many seconds they
require between displays. When the display selection is
blinking DP4 press and hold the button for longer SET
(B1)for2seconds
toactive andpress”(B2)or”(B3)
to increase or decrease the seconds. Def ault setting is 5
seconds,anditwillbe5sasaunitmaxi mum to60s,which
meansyoucanset05s,10s,15s,20supto60s.PressSET
(B1)toconfirmandexit.
z differentdisplaymethods
DP1displaydayandstageoftheday.
DP2displayMonth,dateandyear.
DP3displaydayandtime
DP4 display day and time for XX seconds as above then
display day and stage of the day for XX seconds then
display
month,dayandyearforXXseconds.
(XXsecondsaresettable,defaultfor5seconds)
5.MOUNTING/POSITIONING
Makesureyouhavemount edorplacedthedeviceinasaf e
position.Ifnotthedevicemayfalldownandheavydamages
canoccurforwhichthemanufacturerisno tliable.
6.Radiocontrolledtimereceptionrange:
upto1200kmfromMSFtransmitter.
7.Guarantee
From the moment your Geemarc product is purchased,
Geemarc guarantee it for the period of two years. During
this time,all repairs or replacements(at our discretion)are
freeofcharge.Shouldyouexperienceapro blemthencontac t
our helpline or visit our website at www.geemarc.com. The
guaranteedoes not
coveraccidents,negligenceorbreakages
to any parts. The product must not be tampered with or
taken apart by anyone who is not an authorised Geemarc
representative. The Geemarc guarantee in no way limits
yourlegalri ghts .
IMPORTANT:YOURRECEIPTISPARTOFYOURGUARANTEE
ANDMUSTBERETAINEDAND
PRODUCEDINTHEEVENTOF
AWARRANTYCLAIM.
CEDeclaration:
Hereby Geemarc Telecom SA declares that this product is
in compliance with the essential requirements and other
relevant provisions of the Radio and Telecommunications
TerminalEquipmentDirective2014/53/UE.
Thedeclarationofconformitymaybeconsultedat
www.geemarc.com
Caution:Radiofrequency
interferencemaycausediscernible
soundontheunit.Thesoundwillendwhentheinterference
stops.
8.Recyclingdirectives
The WEEE (Waste Electrical and Electronic Equipment) has
beenputinplacefortheproductsinendoflifearerecycled
inthebestway.
When this product is out of order, please do not put it in
yourdomesticwastebin.
Pleaseuseoneofthefollowingdisposaloptions:
‐
Removethebatteriesanddeposittheminanappropriate
WEEEskip.
DeposittheproductininaappropriateWEEEskip.
‐ Orhandtheold productto the retailer. If you purchasea
newone,theyshouldacceptit.
Forproductsupportandhelpvisitourwebsiteat
www.geemarc.com
UnitedKingdom:5BSwallowCourt,Swallowfields,Welwyn
GardenCity,Hertfordshire,AL71SB,UK
telephone01707387602
linesareopen09h00to16h00MontoFri
UGViso5_MSF(UK)_En_A4_V1.2
MORNING 7:01
12:00
AFTERNOON 12:01
17:00
EVENING 17:01
23:00
NIGHT 23:01
7:00
  • Page 1 1
  • Page 2 2

Geemarc VISO5 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI