iiyama Ecran 27 Pouces Full HD G-Master G2770HSU-B1 Moniteur 27 Pouces Full HD User manual

iiyama
Brand
iiyama
Model
Ecran 27 Pouces Full HD G-Master G2770HSU-B1 Moniteur 27 Pouces Full HD
Type
User manual

This manual is also suitable for

ENGLISH
USER MANUAL
Thank you very much for choosing the
iiyama LCD monitor.
We recommend that you take a few
minutes to read carefully through this brief
but comprehensive manual before installing
and switching on the monitor. Please keep
this manual in a safe place for your future
reference.
ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterized by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL2470H, PL2770H
Wereservetherighttochangespecicationswithoutnotice.
All trademarks used in this user manual are the property of their respective owners.
Eprel registration number GB2470HSU-B1 : 361426, G2470HSU-B1 : 361435
GB2770HSU-B1 : 361482, G2770HSU-B1 : 361492
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
YoucanaccesstheWebpageofdierentcountriesfromthere.
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................ 1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................4
INSTALLATION ...............................................................................5
FITTING AND REMOVAL OF BASE :
G-MASTER GB2470HSU / G-MASTER GB2770HSU .................... 7
Fitting and Removal of Base :
G-MASTER G2470HSU / G-MASTER G2770HSU .........................8
CONTROLS AND CONNECTORS :
G-MASTER GB2470HSU / G-MASTER GB2770HSU .................... 9
CONTROLS AND CONNECTORS :
G-MASTER G2470HSU / G-MASTER G2770HSU .......................10
CONNECTING YOUR MONITOR :
G-MASTER GB2470HSU / G-MASTER GB2770HSU .................. 11
CONNECTING YOUR MONITOR :
G-MASTER G2470HSU / G-MASTER G2770HSU .......................12
COMPUTER SETTING .................................................................13
ADJUSTING HEIGHT AND VIEWING ANGLE :
G-MASTER GB2470HSU / G-MASTER GB2770HSU .................. 13
ADJUSTING VIEWING ANGLE :
G-MASTER G2470HSU / G-MASTER G2770HSU .......................14
OPERATING THE MONITOR .............................................................15
ADJUSTMENT MENU CONTENTS ..............................................16
STANDBY FEATURE ....................................................................28
TROUBLE SHOOTING ......................................................................29
RECYCLING INFORMATION .............................................................30
APPENDIX ........................................................................................31
SPECIFICATIONS : G-MASTER GB2470HSU ............................. 31
SPECIFICATIONS : G-MASTER G2470HSU ...............................32
SPECIFICATIONS : G-MASTER GB2770HSU ............................. 33
SPECIFICATIONS : G-MASTER G2770HSU ...............................34
DIMENSIONS : G-MASTER GB2470HSU .................................... 35
DIMENSIONS : G-MASTER G2470HSU ......................................35
DIMENSIONS : G-MASTER GB2770HSU .................................... 36
DIMENSIONS : G-MASTER G2770HSU ......................................36
COMPLIANT TIMING ....................................................................37
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR IF YOU ARE AWARE OF ANY PROBLEMS
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerousandcancausereorelectricshock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
reorelectricshock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
anyobjectinsidemaycausere,electricshockordamage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Donotusewherewatermaybesplashedorspiltontothemonitorasitmaycausereorelectric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Besuretooperatethemonitoronlywiththespeciedpowersupply.Useofanincorrectvoltagewill
causemalfunctionandmaycausereorelectricshock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objectsonthecables.Ifdamaged,thecablesmaycausereorelectricshock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smokyareasasitmaycausere,electricshockordamage.Youshouldalsoavoidareaswherethe
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
re.Toallowadequateaircirculation,placethemonitoratleast10cm(or4inches)fromanywalls.
When removing the tilt stand, the ventilation slots on the back side of the monitor can be blocked.
This may overheat the monitor and may cause fire or damage. Make sure to allow enough
ventilation when removing the tilt stand. Operating the monitor on its back, side, upside down or on
a carpet or any other soft material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
Whenyoumovethemonitor,turnothepowerswitch,unplugthemonitorandbesurethesignal
cableisdisconnected.Ifyoudonotdisconnectthem,itmaycausereorelectricshock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itselfasthismaycausereorelectricshock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
CAREFUL! PROTECT YOUR HANDS AND FINGERS
Becarefulnottohurtyourngersorhandswhenyouchangetheheightortheangle.
Injurycanoccurifcareisnottakentoavoidngercontactwiththedisplaysbasewhenadjusting
theheight.(Justforheightadjustablemodel.)
REMARK FOR 24/7 USAGE
Thisproductisnotspecicallydesignedfor24/7usageinallenvironments.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
Foroptimalviewingcomfort,themonitorshouldbejustbeloweyeleveland40-60cm(16-24inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE

When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.

Youmayndslightlyunevenbrightnessonthescreendependingonthedesktoppattern
you use.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screencanberecoveredslowlybychangingtheimageorturningothePowerSwitch
for some hours.
SPECIAL NOTES ON LCD MONITORS

If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or replacement
packaging.
WARNING

If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION

Forsafetyreasons,turnothepowerswitchandunplugthemonitorbeforeyou
clean it.

To protect the LCD panel, do not scratch or rub the screen with a hard object.

Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.

Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
CABINET
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don’t use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
NOTE
NOTE
ENGLISH
4 BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyamaoce.
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
FEATURES
Supports Resolutions up to 1920 × 1080
High Contrast 1100:1 (Typical), Advanced Contrast Function Available,
Brightness 250cd/m
2
(Typical)
Moving Picture Response Time 0.8ms
Supports AMD FreeSync™ Premium Technology
Flicker - Free
Blue Light Reducer
Digital Character Smoothing
2 × 2W Stereo Speakers
Standby Feature (VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
Power Cable*
1

HDMI Cable
DisplayPort Cable
USB Cable
Stand-Base with a screw
Strand-Neck*
2
Safety Guide

Quick Start Guide
*
1
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
An approved power cable greater or equal to H05VVF, 3G, 0.75mm² must be used.
*
2
Accessory for G-MASTER G2470HSU / G-MASTER G2770HSU
CAUTION
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
INSTALLATION

When you use with the wall mounting, in consideration of thickness of the mounting
stage,tightentheM4Screws(4pcs)withwasherwhich“L”lengthis7mmtofasten
the monitor. Using the screw longer than this may cause electric shock or damage
because it may contact with the electrical parts inside the monitor.
WARNING
Screw
Chassis
Mounting Stage
[WALL MOUNTING]

Before installation, make sure the wall, ceiling or desktop arm is strong enough to
hold the necessary weight of the display and the mount.
WARNING
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
●G-MASTER G2470HSU / G-MASTER G2770HSU
Available
Landscape
Portrait
Power Indicator
Power Indicator
Power Indicator
Not Available
A
A
A
A
The monitor is designed to be compatible only with the landscape mode.
NOTE

Adjust the monitor’s height before panel rotation.

Attempting to rotate the panel forcibly without adjusting the stand height may cause
damage to the panel or the stand.
With Stand:
[ROTATING THE MONITOR]
●G-MASTER GB2470HSU / G-MASTER GB2770HSU
The monitor is designed to be compatible with both landscape and portrait modes.
Video card for portrait display will be required for rotating the image on the screen.
Available
Portrait
Power Indicator
Not Available
A
A
Landscape
A
Portrait
Power Indicator
A
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7

Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.

Do not give a strong impact to the monitor. It may cause damage.

Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
CAUTION
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Laythemonitoratonatablewithfrontfacedown.
Loosen the ’thumb screw’ to remove the Stand-Base from the monitor.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Laythemonitoratonatablewithfrontfacedown.
Install the Stand-Base as shown on below picture.
Tighten the ’thumb screw’ to secure the Stand-Base to the monitor.
Stand-Base
Thumb screw for Stand-Base
FITTING AND REMOVAL OF BASE : G-MASTER GB2470HSU /
G-MASTER GB2770HSU
<Bottom view>
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
CAUTION
Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Laythemonitoratonatablewithfrontfacedown.
Press the Hook on the back of the monitor and remove the Stand-Neck from the monitor.
Loosen the ’thumb screw’ to remove the Stand-Base from the Stand-Neck.
<Installation>
Combine the Stand-Neck and the Stand-Base.
Tighten the ’thumb screw’ to secure the Stand-Base.
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitoratonatablewithfrontfacedown.
Hold the monitor and install the Stand-Neck to the
monitor until it clicks to secure.
FITTING AND REMOVAL OF BASE : G-MASTER G2470HSU /
G-MASTER G2770HSU
Stand-Neck
Stand-Base
Thumb screw for Stand-Base
<Bottom view>
Hook
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
Power Indicator
Blue: Normal operation
Orange: Standby mode
SignalSelect/ExitButton(INPUT)*
+/VolumeButton(+)*
–/i-StyleColorButton(–)*
MenuButton(MENU)
PowerSwitch()
Speakers
USB Downstream Connector ( 5V,500mA)
USB Downstream Connector ( 5V,500mA)
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
USBUpstreamConnector( )
Headphone Connector
( )
DisplayPort
Connector(DP)
HDMIConnector(HDMI)
Cable Holder
ACConnector( :Alternatingcurrent)
* You can skip the Menu items and directly display an option setting screen or an adjustment scale.
NOTE
NOTE
<Front> <Back>
CONTROLS AND CONNECTORS : G-MASTER GB2470HSU /
G-MASTER GB2770HSU
ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
<Front> <Back>
CONTROLS AND CONNECTORS : G-MASTER G2470HSU /
G-MASTER G2770HSU
Power Indicator
Blue: Normal operation
Orange: Standby mode
SignalSelect/ExitButton(INPUT)*
+/VolumeButton(+)*
–/i-StyleColorButton(–)*
MenuButton(MENU)
PowerSwitch()
Speakers
USB Downstream Connector ( 5V,500mA)
USB Downstream Connector ( 5V,500mA)
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
USBUpstreamConnector( )
Headphone Connector
( )
DisplayPort
Connector(DP)
HDMIConnector(HDMI)
Cable Holder
ACConnector( :Alternatingcurrent)
* You can skip the Menu items and directly display an option setting screen or an adjustment scale.
NOTE
NOTE
ENGLISH
BEFORE YOU OPERATE THE MONITOR 11
[Example of Connection]
<Back>
NOTE
Makesurethatthebuildinginstallationhasacircuitbreakerof120/240V,20A(maximum).
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[ Collect Cables ]
Put the cables through the Cable Holder to bundle them.
CONNECTING YOUR MONITOR : G-MASTER GB2470HSU /
G-MASTER GB2770HSU
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the USB Cable.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turn on your monitor and computer.
Mouse
Keyboard
Game Equipment etc.
HDMI Cable (Accessory)
Computer
DisplayPort Cable (Accessory)
USB Cable (Accessory)
Power Cable (Accessory)
ENGLISH
12 BEFORE YOU OPERATE THE MONITOR
[Example of Connection]
<Back>
NOTE
Makesurethatthebuildinginstallationhasacircuitbreakerof120/240V,20A(maximum).
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[ Collect Cables ]
Put the cables through the Cable Holder to bundle them.
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the USB Cable.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turn on your monitor and computer.
CONNECTING YOUR MONITOR : G-MASTER G2470HSU /
G-MASTER G2770HSU
Mouse
Keyboard
Game Equipment etc.
HDMI Cable (Accessory)
Computer
DisplayPort Cable (Accessory)
USB Cable (Accessory)
Power Cable (Accessory)
ENGLISH
BEFORE YOU OPERATE THE MONITOR 13
Signal Timing
Change to the desired signal timing listed on page 37: COMPLIANT TIMING.
COMPUTER SETTING
For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor’s height
and angle to your own preference.
Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
You are able to adjust the monitor’s height
up to 130mm, angle up to 18° upward and 3°
downward.
Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.
Careful attention is required not to pinch
your fingers or hands into the moving
part of the stand when you change the
angle.
Injury can occur if care is not taken to
avoidngercontactwiththedisplays
base when adjusting the height.
NOTE
Monitor
Stand
ADJUSTING HEIGHT AND VIEWING ANGLE :
G-MASTER GB2470HSU /
G-MASTER GB2770HSU
3°
18°
130mm
ENGLISH
14 BEFORE YOU OPERATE THE MONITOR
For optimal viewing it is recommended to look at the full face
of the monitor.
Hold the stand so that the monitor does not topple when you
change the monitor’s angle.
You are able to adjust the monitor’s angle up to 21.5° upward,
3.5° downward.
In order to ensure a healthy and relaxed body position
when using the monitor at visual display workstations, it is
recommended that the adjusted tilt angle should not exceed
10°. Adjust the monitor’s angle to your own preference.
NOTE
Do not touch the LCD screen when you change
the angle. It may cause damage or break the LCD
screen.
Careful attention is required not to catch your
ngersorhandswhenyouchangetheangle.
ADJUSTING VIEWING ANGLE :
G-MASTER G2470HSU /
G-MASTER G2770HSU
3.5°
21.5°
ENGLISH
OPERATING THE MONITOR 15
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the
COMPLIANT TIMING shown on page 37. You are also able to adjust the picture by following the button
operation shown below.
Press the MENU Button to start the On Screen Display feature.
Use the + / – Buttons to select the Menu which contains the item you want to adjust
or set and then press the MENU Button.
Use the + / – Buttons to highlight the desired adjustment / setting icon and then
press the MENU Button.
Use the + / –
Buttons again to make the appropriate adjustment or setting and then
press the MENU Button.
Press the INPUT Button to leave the menu, and the adjustment or setting you just
made would be automatically saved.

When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD Time has passed. Also, press the INPUT
ButtontoquicklyturnotheOn-
Screen Display.

Any changes are automatically saved in the memory when the On Screen Display disappears.
TurningothepowershouldbeavoidedwhileusingtheMenu.

All adjustments have only one setting which applies to all signal timings.
NOTE
For example, to correct for OSD vertical position, select Menu item of Setup Menu and then
press the MENU Button. Then, select OSD Vertical Position by using the + / – Buttons. An
adjustment scale becomes active after you press the MENU Button.
Use the + / – Buttons to change the OSD vertical position settings. The OSD vertical position of
the overall display should be changing accordingly while you are doing this.
Press theMENUButtonandnallytheINPUT Button to close the On Screen Display feature. All
changes are saved in the memory.
PICTURE ADJUST
DISPLAY INFORMATION
IMAGE ADJUST
COLOR SETTINGS
LANGUAGE
RESET
STORE USER SETTING
INPUT SELECT
AUDIO ADJUST
SETUP MENU
G-MASTER GB2470HSU
OSD HORIZONTAL POSITION
OSD TIME
OPENING LOGO
ON
OFF
LED
AMD FreeSync Premium
ON
OFF
ON
OFF
SETUP MENU
OSD VERTICAL POSITION
ENGLISH
16 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Picture Adjust
*
1
Too dark
Too bright
Brightness *
2
Contrast
Too dull
Too intense
Adv. Contrast *
3
Typical Contrast Ratio
O
On
Increased Contrast Ratio
Overdrive
O/-2/-1/0/+1/+2
It will improve the gray level response time of the LCD panel.
A higher level results in a faster response time.
Brightness of back-light is reduced.
O Normal
Eco
Mode1
Brightness of back-light is reduced more than Mode1.
Mode2
Brightness of back-light is reduced more than Mode2.
Mode3
Blue Light Reducer
O
Typical
Mode1
Blue light is reduced.
Mode2
Blue light is reduced more than Mode1.
Mode3
Blue light is reduced more than Mode2.
Black Tuner
From -5 to +5
You can adjust Dark shades.
Gamma
MBR *
3,4
O/-3/-2/-1/0/+1/+2/+3
Improve the moving picture response time of the LCD
panel.
PICTURE ADJUST
DISPLAY INFORMATION
IMAGE ADJUST
COLOR SETTINGS
LANGUAGE
RESET
STORE USER SETTING
INPUT SELECT
AUDIO ADJUST
SETUP MENU
G-MASTER GB2470HSU
CONTRAST
OVERDRIVE
ECO
ADV. CONTRAST
ON
OFF
BLACK TUNER
BLUE LIGHT REDUCER
PICTURE ADJUST
BRIGHTNESS
OFF
OFF
OFF
MBR
GAMMA
OFF
GAMMA3
Gamma1
Gamma2
Gamma3
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41

iiyama Ecran 27 Pouces Full HD G-Master G2770HSU-B1 Moniteur 27 Pouces Full HD User manual

iiyama
Brand
iiyama
Model
Ecran 27 Pouces Full HD G-Master G2770HSU-B1 Moniteur 27 Pouces Full HD
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents