The color and the appearance may differ depending on the product, and the specifications are subject to change without prior

notice to improve the performance.

The contents of this manual are subject to change without notice to improve quality.

Copyright © 2019 Pixio USA Inc. I Pixio is a registered trademark of Pixio USA Inc. I All Rights Reserved.

Use or reproduction of this manual in parts or entirety without the authorization of Pixio USA Inc is prohibited.

All other trademarks are owned by their respective owners. Rev.1.01Copyright © 2019 Pixio USA Inc. I Pixio is a registered trademark of Pixio USA Inc.

All Rights Reserved.

PX7 PRIME

27in 165hz Gaming Monitor

this product.

This symbol alerts you that important literature concerning operation

and maintenance has been included with this product.

Before Using the Product.

Do not place the monitor near heat sources, such as radiators, and do not expose the monitor to direct sunlight

for an extended period of time.

Make sure to keep the original packaging material. If there are any needs to transport the monitor, the packaging

material will be the best method for successful delivery.

Make sure to use a soft, non-abrasive cloth when cleaning the monitor. Do not use corrosive or strong detergents

to clean the monitor. They may result in permanent damage to the panel and will void the warranty.

Make sure the monitor is not placed near any source of water, such as the bathroom, kitchen, or humid areas.

Do not place the monitor on an unstable, or uneven surface. If dropped, the monitor may cause bodily injuries.

When transporting the monitor, make sure it is secured in an upright position or preferably in its original packaging

for best results. When mounting the monitor, make sure to follow the instructions of the respective mounting provider

for best results.

The openings in the monitor are for ventilation. For best results, make sure the ventilation holes are not covered up.

Avoid confined spaces like a bookcase for proper functionality.

If the monitor will not be used for an extended period of time, make sure to unplug the power cord to prevent the risk

of damage from lighting strikes or other abnormal voltage incidents.

Do not overburden any socket to prevent risk of fire or shock.

Take the following steps when cleaning.

1 Power off the product and computer.

2 Disconnect the power cord from the product.

Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock

may result.

3 Wipe the monitor with a clean, soft and dry cloth.

Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.

Do not spray water or detergent directly on the product.

4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.

5 Connect the power cord to the product when cleaning is finished.

How to Reconfigure

To turn ON, click the Jog Button.

To turn OFF, Press (Enter) the Jog Button for 2 seconds.