OKI C332dn User manual

User’s Guide

C332dn/C332dnw

Preface > 2

P

REFACE

Every effort has been made to ensure that the information in this document is complete,

accurate, and up-to-date. The manufacturer assumes no responsibility for the results of

errors beyond its control. The manufacturer also cannot guarantee that changes in software

and equipment made by other manufacturers and referred to in this guide will not affect

the applicability of the information in it. Mention of software products manufactured by

other companies does not necessarily constitute endorsement by the manufacturer.

While all reasonable efforts have been made to

make this document as

accurate and helpful

as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or

completeness of the information contained herein.

The most up-to-date drivers and manuals are available from:

https://www.oki.com/printing/

OKI is a registered trademark of Oki El

ectric Indust

ry Co., Ltd.

ENERGY STAR is a trademark of th

e United States Environmental Protection Agency.

Microsoft, MS-DOS and Windows are registered trademarks of M

icrosoft Corporation.

Apple, Macintosh, Mac and Mac OS are registered trademarks of Apple Inc.

Other product names and brand names are registered trademarks or trademarks of thei

r

proprietors.

This product complies with the requirements

of the Council Di

rectives 2014/30/

EU (EMC), 2014/35/EU (LVD), 2014/53/EU (RED), 2009/125/EC (ErP) and

2011/65/EU(RoHS), as amended where applicable, on the approximation of the

laws of the member states relating to Electromagnetic Compatibility, Low

Voltage, Radio & Telecommunications Terminal Equipment, Energy related

Products and Restriction on the use of certain Hazardous Substances in

electrical and electronic equipment.

The following cables were used to evaluate t

hi

s product for EMC directive 2014/30/EU

compliance, and configurations other than this may affect that compliance.

CABLE TYPE LENGTH

(METRE)

CORE SHIELD

Power 1.8

USB 5.0

LAN 7.0

ENERGY STAR > 3

ENERGY STAR

Target countries of the ENERGY STAR program are the United States, Canada and Japan.

It is not applicable to other countries.

This product is compliant with ENERGY STAR v2.0 only.

E

MERGENCY

FIRST

AID

Take care with toner powder:

If swallowed, give small amounts of cold water and seek m

edical

attention. DO NOT attempt to induce vomiting.

If inhaled, move the person to an open area f

or fresh air. Seek medical

attention.

If it gets into the eyes, flush with large amounts of water for at least 15

minutes keeping eyelids ope

n. Seek medical attention.

Spillages should be treated with cold water and soap to hel

p reduce risk

of staining skin or clothing.

E

NVIRONMENTAL

INFORMATION

w

.

o

k

i

.

c

o

m

/

p

r

i

n

t

i

n

g

/

Contents > 4

C

ONTENTS

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Emergency first aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Environmental information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Notes, cautions and warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Documentation suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

On-line usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Printing pages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Changing the display language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Switching on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Switching off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Wireless module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Energy saving settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Power saving mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Sleep mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Returning to standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Paper recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Cassette trays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Multi purpose tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Output tray (face down). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Rear output tray (face up) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Duplex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Loading paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Cassette trays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Multi purpose tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Menu functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Operator panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

How to change the settings - user . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

How to change the settings - administrator . . . . . . . . . . . . . . . . . . . . . . .22

Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Print Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Admin Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Network Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

USB Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Print Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Color Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

PS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

PCL Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

XPS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

IBM PPR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

EPSON FX Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Panel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Contents > 5

Power Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Tray Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Others Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Change Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Print statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

AirPrint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Google Cloud Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Wireless Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Wireless (AP Mode) Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Boot Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Replacing consumable items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Toner cartridge replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Replacing the transfer belt unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Fuser replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

...the unit casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

...the LED head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Installing upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Additional paper tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Setting the driver device options . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Wireless LAN Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Precations when using wireless LAN. . . . . . . . . . . . . . . . . . . . . . . . . . .65

Connecting via wireless LAN (Infrastructure mode) . . . . . . . . . . . . . . . .66

Connecting via wireless LAN (AP mode) . . . . . . . . . . . . . . . . . . . . . . . .68

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Major printer components and paper path . . . . . . . . . . . . . . . . . . . . . . . .69

Paper sensor error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Clearing paper jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Dealing with unsatisfactory printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Before Machine Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Contact Us . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Notes, cautions and warnings > 6

N

OTES

,

CAUTIONS

AND

WARNINGS

For the protection of your product, and in order to ensure that you benefit from its full

functionality, this model has been designed to operate only with genuine original toner

cartridges. Any other toner cartridge may not operate at all, even if it is described as

“compatible”, and if it does work, your product's performance and print quality may be

degraded.

Use of non-genuine products may invalidate your warranty.

Specifications subject to change without notice. All trademarks acknowledged.

NOTE

A note provides additional information to supplement the main text.

CAUTION!

A caution provides additional information which, if ignored, may

result in equipment malfunction or damage.

WARNING!

A warning provides additional information which, if ignored, may

result in a risk of personal injury.

About this guide > 7

A

BOUT

THIS

GUIDE

D

OCUMENTATION

SUITE

This guide is part of a suite of online and printed documentation provided to help you

become familiar with your product and to make the best use of its many powerful features.

The documentation is summarised below for reference and is found on the manuals DVD

unless indicated otherwise:

> Installation Safety booklet: provid

es information for safe use of your product.

This is a paper document that is packaged with the pr

oduct and should be read before

setting up your machine.

> Set-up guide: describes how to unpack, connect

and turn on your product.

This is a paper document that is packaged with the product.

> User’s Guide: helps yo

u become familiar with your product and make the best use

of its many features. Also included are guidelines for troubleshooting and

maintenance to ensure that it performs at its best. Additionally, information is

provided for adding optional accessories as your printing needs evolve.

> Network Guide: hel

ps you become familiar with the functionality of the built in

network interface card.

> Printing Guide: helps you

become familiar with the many features of the driver

software supplied with your product.

> Barcode Printing Guide: helps you become fa

miliar with your product’s built in

barcode printing feature.

> Installation Guides: accompany consumable it

ems and optional accessories to

describe how to install them.

These are paper documents that are packaged

with the consumables and optional

accessories.

> On-line Help: on-line in

formation accessible from the printer driver and utility

software.

Depending on your OS, model or version, the des

cription on this document may be

different.

NOTE

Images used in this manual may include optional features that your product

does not have installed.

About this guide > 8

O

N

-

LINE

USAGE

This guide is intended to be read on screen using Adobe Reader. Use the navigation and

viewing tools provided in Adobe Reader.

There are many cross-references within thi

s book, each highlighted as blue text. When you

click on a cross-reference the display will instantly jump to the part of the manual

containing the referenced material.

By using the button in Adobe Reader, you can navigat

e directly back to where

you were

before.

You can access specific information in two ways:

> In the list of bookmarks down the lef

t hand side of your screen, click on the topic of

interest to jump to the required topic. (If the bookmarks are not available, use the

“Contents” on page 4.)

> In the list of bookmarks, click on Inde

x to jump to the Index. (If the bookmarks are

not available, use the “Contents” on page 4.) Find the term of interest in the

alphabetically arranged index and click on the associated page number

to jump to

the page containing the term.

P

RINTING

PAGES

The whole manual, individual pages, or sections may be printed. The procedure is:

1. From the toolbar, select File > Print (

or press the Ctrl + P keys).

2. Choose which pages yo

u wish to print:

(a) All pages, (1),

for the entire manual.

(b) Current page, (2), for the page

at which you are looking.

(c) Pages from and to, (3), f

or the range of pages you specify by entering their

page numbers.

(d) Click OK.

1

2

3

Getting Started > 9

G

ETTING

S

TARTED

O

VERVIEW

F

RONT

VIEW

1. Output tray (face down stacker).

Standard printed copy delivery poin

t. Holds

up to 150 sheets at 80g/m².

2. Operator panel.

Menu driven operator controls and LCD

panel

a

.

3. Paper tray.

Standard paper tray. Holds up to 250 sheets

of 80g/m² pa

per.

4. Multi purpose tray.

Used for feeding heavier paper stocks,

en

velopes and othe

r special media. Also for

manual feeding of single sheets when

required.

a. The display language can be changed to show different languages. (see “Changing the

display language” on page 10).

5. Multi-purpose tray release recess.

6. Output tray release button.

7. LED heads.

8. Fuser release levers.

9. Toner cartridges (C,M,Y,K).

10. ID unit.

7

8

9

5

10

3

4

1

2

6

Getting Started > 10

R

EAR

VIEW

When the rear paper stacker is folded down paper exits the printer through the rear of the

printer and is stacked here face up. This is mainly used for heavy print media. When used

in conjunction with the multi purpose feed tray, the paper path through the printer is

essentially straight. This avoids bending the paper around curves in the paper path and

enables feeding of up to 220g/m² media.

C

HANGING

THE

DISPLAY

LANGUAGE

The default language used by your machine for display messages is English. If required, this

can be changed using the operator panel to display

ADMIN SETUP > OTHERS SETUP >

LANGUAGE SETUP

.

S

WITCHING

ON

1. Plug the power cable into the power socket of your machine.

2. Plug the power cable into the electric socket.

3. Press the power swit

ch ON.

S

WITCHING

OFF

Hold down the power switch for approximately one second.

W

IRELESS

MODULE

C332dnw comes with a Wireless LAN Module as standard, but the Wireless LAN Module is

set to Disable by default. To enable the Wireless LAN Module, refer to “Wireless LAN

Module” on page 65.

1. AC power socket.

2. Rear output tray (face up stacker).

3. USB interface.

4. Network interface.

a

5. Wireless LAN I/F Cover.

a. The Network Interface may have a protective “plug” which

must be removed before connection can be made.

NOTE

A message displays on the LCD screen and power switch indicator blinks, then

the printer switches OFF automatically.

1

2

5

4

3

Getting Started > 11

E

NERGY

SAVING

SETTINGS

P

OWER

SAVING

MODE

If you do not use the machine for a while, it will enter the power saving mode to control

the power consumption of the device. To cancel or initiate power saving mode, press the

POWER SAVE button on the control panel. The POWER SAVE button illuminates while in

Power Save Mode.

S

LEEP

MODE

Your machine transitions from power saving mode to sleep mode after a set period of time.

In sleep mode the power consumption of the device is minimal. The POWER SAVE button

blinks while in sleep mode.

R

ETURNING

TO

STANDBY

MODE

To return the machine to standby mode from power save or sleep mode, press the POWER

SAVE button on the control panel.

NOTE

By default, the time interval to enter power saving mode is set to 1 minute.

You can change the time interval by pressing the MENU buttons on the control

panel. Then select MENUS > SYSTEM ADJUST > POW SAVE TIME.

NOTE

> The machine will not enter sleep mode if an error occurs and the machine

requires attention.

> By default, the time interval to

enter sleep mode is set to 15 minutes. You

can change the time interval by pressing the MENU buttons on the control

panel. Then select MENUS > SYSTEM ADJUST > SLEEP TIME.

> It will automatically switch from Sleep Mode to Power Save Mode. In a

net

work environment with a large number of packets flows, your

computer may respond by automatically switching from Sleep mode to

Power Save Mode. After a period of time has elapsed, the computer will

automatically enter into Sleep Mode.

NOTE

Whe

n your machine receives a print job, it automatically retu

rns to standby

mode.

Paper recommendations > 12

P

APER

RECOMMENDATIONS

Your printer will handle a variety of print media, including a range of paper weights and

sizes, labels and envelopes. This section provides general advice on choice of media, and

explains how to use each type.

The best performance will be obtained when using standard 75~90g

/m² paper designed

for use in copiers and laser printers.

Use of heavily embossed or very rough textured pap

er is not recommended.

Pre-printed stationery can be used, but the ink must

not offset when exposed to the high

fuser temperatures used in the printing process.

Envelopes

Labels

CAUTION!

Envelopes should be free from twist, curl or other deformations.

They should also be of the rectangular flap type, with glue that

remains intact when subjected to hot roll pressure fusing used in

this type of printer. Window envelopes are not suitable.

CAUTION!

Labels should also be of the type recommended for use in copiers

and laser printers, in which the base carrier page is entirely

covered by labels. Other types of label stock may damage the

printer due to the labels peeling off during the printing process.

Paper recommendations > 13

C

ASSETTE

TRAYS

If you have identical paper stock loaded in another tray (2nd tray if you have one, or multi

purpose tray) you have the printer automatically switch to the other tray when the current

tray runs out of paper. When printing from Windows applications, this function is enabled

in the driver settings. When printing from other systems, this function is enabled in the

Print Menu. (See “AUTO TRAY SWITCH” on page 29.)

SIZE DIMENSIONS WEIGHT (G/M²)

A6

a

a. A6, B6 and Statement printing from Tray 1 or the MP tray only.

b. This paper size can be printed from the MP Tray only.

105 x 1

48mm Light 64 - 74g/m²

Medium Light 75 - 82g/m²

Medium 83 - 104g/m²

Heavy 105 - 120g/m²

Ultra heavy1 121 - 176g/m²

Ultra heavy2 177 - 220g/m²

Tray 1/2: 64 - 176g/m²

MP tray: 64 - 220g/m²

Duplex: 64 - 176g/m²

A5 148 x 210mm

B5 182 x 257mm

B6

a

128 x 182mm

B6 half 64 x 182mm

Executive 184.2 x 266.7mm

A4 210 x 297mm

Letter 215.9 x 279.4mm

Legal 13in. 216 x 330mm

Legal 13.5in. 216 x 343mm

Legal 14in. 216 x 356mm

Statement

a

139.7 x 216mm

8.5in.SQ 216 x 216mm

Folio 210 x 330mm

Custom

COM-9 Envelope

b

98.4 x 225.4mm

COM-10 Envelope

b

104.8 x 241.3mm

Monarch Envelope

b

98.4 x 190.5mm

DL Envelope

b

110 x 220mm

C5 Envelope

b

162 x 229mm

4 x 6inch (4 x 6)

5 x 7inch (5 x 7)

Index Card

b

(3 x 5)

Paper recommendations > 14

M

ULTI

PURPOSE

TRAY

The multi purpose tray can handle the same sizes as the cassette trays but in weights up

to 220

g/m². For very heavy paper stock use rear output tray (face up). This ensures that

the paper path through the printer is almost straight.

The multi purpose tray can feed paper widths from 64mm to 216mm and lengths from

127mm to 1321mm (banner printing).

For paper lengths exceeding 356mm (Legal 14in.) use paper stock between 90g/m² and

128g/m² and rear output tray (face up).

Use the multi purpose tray for printing on envelopes. Up to 10 envelopes can be loaded at

one time, subject to a maximum stacking depth of 10mm.

O

UTPUT

TRAY

(

FACE

DOWN

)

Output tray on the top of the printer can hold up to 150 sheets of 80g/m² standard paper,

and can handle paper stocks up to 176g/m².

Pages printed in reading order (page 1 first) will be sorted in reading order (last page on

top, facing down).

The number of sheets that can be stacked on the face down stacker may vary depending

on environment.

R

EAR

OUTPUT

TRAY

(

FACE

UP

)

Rear output tray at the rear of the printer should be opened and the tray extension pulled

out when required for use. In this condition paper will exit via this path, regardless of driver

settings.

Rear output tray can hold up to 100 sheets of 80g/m² standard paper, and can handle

stocks up to 220

g/m².

Always use this stacker and the multi purpose feeder for paper stocks heavier than

176g/m².

D

UPLEX

Automatic two-sided printing on the same range of paper sizes as tray 2 (i.e. all cassette

sizes except A6), using paper stocks from 64 - 176g/m².

Loading paper > 15

L

OADING

PAPER

C

ASSETTE

TRAYS

1. Remove the paper tray from the printer.

2.

Fan the paper to be loaded at the edges (1) and in the middle (2) to ensure that all

sheets are properly separated, then tap the edges of the stack on a flat surface to

make it flush again (3).

1

2

3

Loading paper > 16

3. Load paper (letter headed paper face down and top edge towards the front of the

printer), as shown.

4. Adjust the rear stopper (a) and paper

guides (b) to the size of paper being used.

5. Close the paper tray gently.

To prevent paper jams:

> Do not lea

ve space be

tween the paper and the guides and rear stopper.

> Do not overfill

the paper tray. Capacity depends on the type of paper stock.

> Do not load damaged paper

.

> Do not load paper of different sizes or types at the same time.

> Close the paper tray gently.

a

b

Loading paper > 17

> Do not pull the paper tray out during printing (except as described below for the 2nd

tray).

NOTE

> If you have two trays and you are printing from the 1st (upper) tray, you

can pull out the 2nd (lower) tray during printing to reload it. However, if

you are printing from the 2nd (lower) tray, do not pull out the 1st (upper)

tray. This will cause a paper jam.

> F

or face down printing, make sure rear output tray (a) is closed (the

paper exits from the top of the printer). Stacking capacity is

ap

proximately 150 sheets, depending on paper weight.

> F

or face up printing, make sure rear output tray (a) is open and the paper

support (b) is exte

nded. Paper is stacked in reverse order and tray

capacity is approximately 100 sheets, depending on paper weight.

> Always use the face up (rear) stacker for heavy paper (card stock, etc.).

CAUTION!

Do not open or close the rear paper exit while printing as it may

result in a paper jam.

b

a

Loading paper > 18

M

ULTI

PURPOSE

TRAY

1. Open the multi purpose tray (a).

2. Fold out the paper supports (b).

3. Press

gently down on the paper p

latform (c) to ensure it is latched down.

4. Load the paper and

adjust the paper guides (d) to the size of paper being used.

> For single-sided printing on headed paper load the paper into the multi purpose

tray

with pre-printed side up and top edge into the printer.

> For two-sided (duplex) printing on headed paper load the paper wit

h pre-printed

side down and top edge away from the printer.

> Envelopes should be loaded face up with top edge to the left and short

edge into

the printer. Do not select duplex printing on envelopes.

> Do not exceed the paper capacity of about 100 sheets or 10 envelopes. Maximum

stacking depth i

s 10mm.

5. Press the tray latch

button inwards to release the paper platform, so that the paper

is lifted and gripped in place.

6. Set the correct paper size for the multi pu

rpose tray in the Media Menu.

NOTE

> Do not press the paper from the top or pull the paper by

holding it while

the printer is printing from the MP tray. If you want to stop printing, open

the output tray.

> F

or instructions on how to remove the paper, refer to “Clearing paper

jams” on page 71.

b

d

c

a

Operation > 19

O

PERATION

For full details of how to use the machine and any optional accessories to print jobs

efficiently and effectively, please refer to the Printing Guide and the Barcode Guide.

Menu functions > 20

M

ENU

FUNCTIONS

This section lists the menus accessed via the controls on the printer’s operator panel and

displayed in the LCD window.

O

PERATOR

PANEL

1. READY LED ON: Ready to receive

data.

BLINKING: Process

ing

data.

OFF: Offline.

2. DISP

LAY Displays the printer

status and any error

me

ssages.

3. MENU Buttons In the ONLINE or

OFFLINE mode: enters

the

Menu mode.

In the Me

nu mode:

forw

ards or reverses the

menu item displayed.

Press for 2 secs. or

l

onger to fast forward or

rev

erse.

4. ON LINE Button Switches between

ON

LINE a

nd OFFLINE.

Exits the menu and goes

O

NLINE when pressed in

the Menu m

ode.

Forces printing on the

paper currentl

y loaded

when presse

d with

“WRONG PAPER” or

“WRONG PAPER SIZE”

displayed.

5. ATTENTION LED ON: A w

arning occurs.

Printing may be possible

(e.g l

ow toner).

BLINKING: An error

occu

rs. Prin

ting not

possible (e.g. toner

empty).

OFF: N

ormal condition.

6. BACK Bu

tton Returns to the previous

higher lev

el menu item.

Page is loading ...

OKI C332dn User manual

OKI C332dn User manual

Related papers

Other documents