Pioneer DJ DDJRZ User manual

Brand: Pioneer DJ

Model: DDJRZ

Category: DJ controllers

Type: User manual

This manual is also suitable for

DDJ-RZ

DJ controller

DDJ-RZ

Operating Instructions

http://pioneerdj.com/support/

The Pioneer DJ site shown above offers FAQs, information on software and various other types of information

and services to allow you to use your product in greater comfort.

http://rekordbox.com/

For the latest version of the rekordbox software, access rekordbox.com and download the software from there.

Contents

How to read this manual

! Thank you for buying this Pioneer DJ product.

Be sure to read this manual and the “Operating Instructions (Quick Start Guide)”

included with the unit. Both documents include important information that you

should understand before using this product.

! In this manual, names of screens and menus displayed on the product and on

the computer screen, as well as names of buttons and terminals, etc., are indi-

cated within brackets. (e.g.: [CUE] button, [Files] panel, [MIC1] terminal)

! Please note that the screens and specifications of the software described in this

manual as well as the external appearance and specifications of the hardware

are currently under development and may differ from the final specifications.

! Please note that depending on the operating system version, web browser set-

tings, etc., operation may differ from the procedures described in this manual.

This manual consists mainly of explanations of functions of this unit as hardware.

For detailed instructions on operating the rekordbox software, see the rekordbox

software’s manual.

! For obtaining the rekordbox software’s manual, see Acquiring the manual

(p. 29 ).

Before start

Features .............................................................................................................................3

What’s in the box ..............................................................................................................4

Preparing the software .....................................................................................................4

Connections and part names

Connections ......................................................................................................................6

Part names and functions ...............................................................................................8

Basic Operation

Connecting this unit and computer ..............................................................................13

Starting the system .........................................................................................................14

Quitting the system ........................................................................................................15

Advanced Operation

Using the performance pads .........................................................................................16

Using the slip mode ........................................................................................................18

Using the dual deck mode .............................................................................................19

Using the fader start function........................................................................................19

Adjusting the crossfader’s operating load ...................................................................20

Using effects ...................................................................................................................20

Using the beat FX function ...........................................................................................20

Using the release FX .......................................................................................................21

Using the SOUND COLOR FX function ........................................................................21

Using the oscillator function .........................................................................................22

Using external inputs .....................................................................................................22

Changing the settings

Launching utilities mode ...............................................................................................24

Utilities modes ................................................................................................................24

About the setting utility software ..................................................................................26

Additional information

Troubleshooting ..............................................................................................................28

Signal flow .......................................................................................................................29

Acquiring the manual ....................................................................................................29

Using as a controller for other DJ software ..................................................................29

About trademarks and registered trademarks ............................................................29

Cautions on copyrights ..................................................................................................30

Before start

Features

This unit is an all-in-one DJ controller designed specifically for rekordbox dj.

It’s interfaces incorporating various controls such as “BIG JOG”, “PERFORMANCE

PADS” and 4-channel mixer are positioned with room to spare to allow for more

individualistic DJ performances using rekordbox dj.

Also, the unit provides “SOUND COLOR FX” and “OSC SAMPLER” functions so that

original arrangements can be added to the music being played back.

Furthermore, numerous input and output terminals support a variety of DJ styles.

Featuring aluminum material for the top panel, the design makes the unit look high

quality, which is appropriate in a variety of scenes such as nightclubs, home parties,

etc.

! rekordbox

— rekordbox is a composite software that enables track management and DJ

performances.

! rekordbox dj

— The DJ performance function of rekordbox is called rekordbox dj. Enter the

license key included with this product to use rekordbox dj.

BIG JOG & ON JOG DISPLAY

We have achieved the shortest time required from when jog is operated until when

the control signal is transferred to the software. Additionally, “BIG JOG”, a large

sized jog, allows the DJ to play scratches as they wish with smooth operability.

At the center of the jog, the “ON JOG DISPLAY” displays the playback status of

music and the current playback position so that the DJ can perform scratching

more accurately. Also, the unit is equipped with “JOG FEELING ADJUST”, which is

popular in the CDJ Series. It is possible to adjust the operation load and back spin

continuous time during scratch play to match particular tastes.

MULTI-COLOR PERFORMANCE PADS

“MULTI-COLOR PERFORMANCE PADS”, large rubber pads used to operate func-

tions such as HOT CUE, PAD FX, and SAMPLER, are positioned at the front of the

unit.

Music can be arranged by dynamic actions such as beating and rolling and the

volume of the sampler can be increased or decreased depending on the strength of

the beat.

Also, each pad has built-in multi-color illumination so you can instantaneously

understand the information required for your performance from the color and light-

ing state of the pad.

SEQUENCER

The “SEQUENCER” function that enables recording sampler operation patterns and

playing back recorded sampler operation patterns can be intuitively operated from

the included dedicated operation interface.

DJ performances full of originality are possible as the “SEQUENCER” function and

dedicated operation interface can be used to easily create phrases using sounds

loaded in the sampler.

4-CHANNEL MIXER

The unit includes “4-CHANNEL MIXER”, which allows the DJ to independently oper-

ate songs being played back with four decks. Four songs can be mixed to create a

highly individualistic DJ mix.

Level meters are located near the master unit and the operation interface of each

channel, so that input and output levels can be understood instantly.

This unit retains the control panel layout of the Pioneer DJM series, the world stan-

dard in DJ mixers.

The simple, easy-to-understand control panel layout not only facilitates DJ perfor-

mances but also makes it easy for DJs using the unit for the first time to operate it

without hesitation, so it can be used without worry as a permanently installed mixer

in the club.

OSC SAMPLER

The unit is equipped with the “OSC SAMPLER” function for generating four types of

sound (NOISE, SINE, SIREN, and HORN). Operation is simple. Just press the button

of the sound type you wish to output. You can take music to an entirely new level

by superimposing oscillator sound over the music you are playing back or further

emphasizing the climax of music. Also, you can change the tone by simply turning

the [OSC SAMPLER PARAMETER] control, making it possible to generate oscillator

sound that is matched to the music. Furthermore, you can use sample sounds

saved to the OSC SAMPLER in “rekordbox dj”.

SOUND COLOR FX

The unit is equipped with four “SOUND COLOR FX” functions (SPACE, JET, PITCH,

and FILTER) for achieving a wide range of musical arrangements.

By simply turning the control, it is possible to create the effect you want, and a vari-

ety of remix can be achieved such as adding original arrangements to the music.

Creative effect performances are also made possible by assigning your favorite

SOUND COLOR FX included in “rekordbox dj”.

PLUG AND PLAY DUAL USB PORT

Two USB sound cards are provided to connect the unit to up to two computers at the

same time.

The sound cards of the unit and all buttons and controls are set to be linked with

“rekordbox dj” beforehand so that the DJ can begin performances immediately

using “rekordbox dj” without having to make troublesome settings.

The USB selector located at the top side can be used to switch between the two

sound cards with a single action. When one DJ takes over from another, this func-

tion provides a smooth transition between the two computers without sound being

interrupted.

FLEXIBLE CONNECTIVITY

Four external input systems and two MIC input systems are provided to connect to a

CD player or analog turntable.

Mixing is possible without going through a computer, so the unit can be used as a

single DJ mixer as well.

In addition, two MASTER OUT systems and one BOOTH OUT system are provided to

handle professional PA device output.

All kinds of party scenes and DJ playing styles are supported.

DURABLE FADER

A slide structure is used for the crossfader and channel fader, in which the fader

knob is supported by two metal shafts.

This achieves smooth operability without wobble and also high durability.

Also, effects on inside the faders caused by liquid and dust are minimized.

An independently developed “MAGVEL FADER” magnetic system is equipped for

the crossfader to support scratch play, which provides high durability of more than

10 000 000 operations, and fine operability.

HIGH SOUND QUALITY

Leveraging the audio circuit of Pioneer audio devices for clubs, the unit provides

powerful sound quality faithful to the original. It also reduces contact resistance

through use of an AC inlet having a wide contact area with the power cable, and

achieves stable and powerful sound even in the DJ booth in a loud environment.

By adopting a high performance D/A converter and low jitter crystal oscillator made

by Wolfson Microelectronics, the unit reproduces clear and powerful club sound

faithful to the original.

PROFESSIONAL QUALITY DESIGN

Aluminum material on the top panel and jog plate provides a sense of high quality

design.

This unit is an essential part of DJ performance in clubs and home party scenes.

SLIP MODE

This unit is equipped with a SLIP MODE function to enable sound to continue in the

background while operations such as looping, scratching, and hot cueing are being

performed. This means operations such as looping, scratching, and hot cueing can

be performed without changing the original track’s composition.

NEEDLE SEARCH

Points can be searched for simply by touching the touch pad with a finger. This

makes for intuitive, speedy searching with the sense of touching the music directly.

What’s in the box

! Power cord

! USB cable

! Warranty (for some regions only)

! Operating Instructions (Quick Start Guide)

! rekordbox dj license key

1 Only one USB cable is included with this unit.

To connect two units, use a cable conforming to USB 2.0 standards.

2 Products for Japan and Europe only. (For the North American region, the cor-

responding information is provided on the last page of both the English and

French versions of the “Operating Instructions (Quick Start Guide)”.)

Cautions

The license key cannot be reissued. Be careful not to lose it.

Preparing the software

About rekordbox

 Acquiring rekordbox (Mac/Windows)

1 Launch a web browser on the computer and access the

rekordbox site below.

http://rekordbox.com/

2 Download rekordbox from the rekordbox download page.

3 Install rekordbox and register the account.

4 Activate rekordbox dj.

! For instructions, see the rekordbox software’s manual.

To activate the rekordbox dj function, enter the rekordbox dj license key supplied

with this product.

About the driver software

This driver software is an exclusive driver for outputting audio signals from a

computer.

! First read the Software end user license agreement on page 5 carefully.

Operating environment

Supported operating systems

Mac OS X 10.10 / 10.9 / 10.8 (latest update)

Windows

8/8.1 (latest service pack)

32-bit version

64-bit version

Windows Pro

8/8.1 (latest service pack)

32-bit version

64-bit version

Windows

7 Home Premium/Professional/Ultimate (latest service

pack)

32-bit version

64-bit version

Checking the latest information on the driver software

For the latest information on this unit’s dedicated driver software, see the Pioneer

DJ site below.

http://www.pioneerdj.com/

 Obtaining the driver software

1 Launch a web browser on the computer and access the

Pioneer DJ site below.

http://www.pioneerdj.com/

! To switch the screen to Japanese display, scroll the screen to the bottom, click

the [EN] indication at the bottom right of the screen and then select [JA].

2 Click [Support].

3 Click [Software & firmware updates].

4 Click [DDJ-RZ] in the [CONTROLLER] category.

5 After clicking [Drivers], download the latest driver software

from the download page.

Download the driver for either Windows or Mac from the download page.

Installation procedure (Windows)

Do not connect this unit and the computer until installation is completed.

Log on as the user which was set as the computer’s administrator before

installing.

! If any other programs are running on the computer, quit them.

1 Obtaining the driver software Double-click the file for

Windows (DDJ-RZ_X.XXX.exe) downloaded in

The driver installation screen appears.

2 Carefully read the Software end user license agreement

and if you consent to the provisions, put a check mark in

[I agree.] and click [OK].

If you do not consent to the provisions of the Software end user license agreement,

click [Cancel] and stop installation.

3 Proceed with installation according to the instructions on

the screen.

If [Windows Security] appears on the screen while the installation is in progress,

click [Install this driver software anyway] and continue with the installation.

When the installation program is completed, a completion message appears.

Installation procedure (Mac OS X)

Do not connect this unit and the computer until installation is completed.

If any other programs are running on the computer, quit them.

1 Obtaining the driver software Double-click the file for Mac

(DDJ-RZ_M_X.X.X.dmg) downloaded in

The [DDJ-RZ_AudioDriver] menu screen appears.

2 Double-click [DDJ-RZ_AudioDriver.pkg].

The driver installation screen appears.

3 Check the details on the screen and click [Continue

Anyway].

4 When the end user license agreement appears, read

Software end user license agreement carefully, then click

[Continue Anyway].

5 If you consent to the provisions of the Software end user

license agreement, click [Agree].

If you do not consent to the provisions of the Software end user license agreement,

click [Disagree] and stop installation.

6 Proceed with installation according to the instructions on

the screen.

Before start

Checking the latest information on the driver

software

For the latest information on this unit’s dedicated driver software, see the Pioneer

DJ site below.

http://www.pioneerdj.com/

 Software end user license agreement

This Software End User License Agreement (“Agreement”) is between you (both the

individual installing the Program and any single legal entity for which the individual

is acting) (“You” or “Your”) and Pioneer DJ Corporation (“Pioneer DJ”).

TAKING ANY STEP TO SET UP OR INSTALL THE PROGRAM MEANS THAT YOU

ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT. PERMISSION TO

DOWNLOAD AND/OR USE THE PROGRAM IS EXPRESSLY CONDITIONED ON

YOUR FOLLOWING THESE TERMS. WRITTEN OR ELECTRONIC APPROVAL IS

NOT REQUIRED TO MAKE THIS AGREEMENT VALID AND ENFORCEABLE. IF

YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU ARE

NOT AUTHORIZED TO USE THE PROGRAM AND MUST STOP INSTALLING IT OR

UNINSTALL IT, AS APPLICABLE.

1 DEFINITIONS

1 “Documentation” means written documentation, specifications and help

content made generally available by Pioneer DJ to aid in installing and using

the Program.

2 “Program” means all or any part of Pioneer DJ’s software licensed to You by

Pioneer DJ under this Agreement.

2 PROGRAM LICENSE

1 Limited License. Subject to this Agreement’s restrictions, Pioneer DJ grants

to You a limited, non-exclusive, non-transferable, license (without the right to

sublicense):

a To install a single copy of the Program in Your computer or mobile

device, to use the Program only for Your personal purpose complying

with this Agreement and the Documentation (“Authorized Use”);

b To use the Documentation in support of Your Authorized Use; and

c To make one copy of the Program solely for backup purposes, provided

that all titles and trademark, copyright and restricted rights notices are

reproduced on the copy.

2 Restrictions. You will not copy or use the Program or Documentation except

as expressly permitted by this Agreement. You will not transfer, sublicense,

rent, lease or lend the Program, or use it for third-party training, commercial

time-sharing or service bureau use. You will not Yourself or through any third

party modify, reverse engineer, disassemble or decompile the Program,

except to the extent expressly permitted by applicable law, and then only

after You have notified Pioneer DJ in writing of Your intended activities.

3 Ownership. Pioneer DJ or its licensor retains all right, title and interest in

and to all patent, copyright, trademark, trade secret and other intellectual

property rights in the Program and Documentation, and any derivative works

thereof. You do not acquire any other rights, express or implied, beyond the

limited license set forth in this Agreement.

No Support. Pioneer DJ has no obligation to provide support, maintenance,

upgrades, modifications or new releases for the Program or Documentation

under this Agreement.

3 WARRANTY DISCLAIMER

THE PROGRAM AND DOCUMENTATION ARE PROVIDED “AS IS” WITHOUT ANY

REPRESENTATIONS OR WARRANTIES, AND YOU AGREE TO USE THEM AT

YOUR SOLE RISK. TO THE FULLEST EXTENT PERMISSIBLE BY LAW, PIONEER DJ

EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND WITH RESPECT TO THE

PROGRAM AND DOCUMENTATION, WHETHER EXPRESS, IMPLIED, STATUTORY,

OR ARISING OUT OF COURSE OF PERFORMANCE, COURSE OF DEALING OR

USAGE OF TRADE, INCLUDING ANY WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, ACCURACY,

TITLE OR NON-INFRINGEMENT.

4 EXPORT CONTROL AND COMPLIANCE WITH LAWS AND

REGULATIONS

You may not use or otherwise export or re-export the Program except as authorized

by United States law and the laws of the jurisdiction in which the Program was

obtained. In particular, but without limitation, the Program may not be exported

or re-exported (a) into any U.S.-embargoed countries or (b) to anyone on the U.S.

Treasury Department's Specially Designated Nationals List or the U.S. Department

of Commerce Denied Persons List or Entity List. By using the Program, you repre-

sent and warrant that you are not located in any such country or on any such list.

You also agree that you will not use the Program for any purposes prohibited by

United States law, including, without limitation, the development, design, manufac-

ture, or production of nuclear, missile, or chemical or biological weapons.

5 U.S. GOVERNMENT RESTRICTED RIGHTS

The Program and Documentations are “commercial computer software” and

“commercial computer software documentation” as those terms are defined in

48 C.F.R. §252.227-7014 (a) (1) (2007) and 252.227-7014 (a) (5) (2007). The U.S.

Government’s rights with respect to the Program and Documentations are limited

by this license pursuant to 48 C.F.R. §12.212 (Computer software) (1995) and 48

C.F.R. §12.211 (Technical data) (1995) and/or 48 C.F.R. §227.7202-3, as applicable.

As such, the Program and Documentations are being licensed to the U.S.

Government end users: (a) only as “commercial items” as that term is defined in 48

C.F.R. §2.101 generally and as incorporated in DFAR 212.102; and (b) with only those

limited rights as are granted to the public pursuant to this license. Under no circum-

stance will the U.S. Government or its end users be granted any greater rights than

we grant to other users, as provided for in this license. Manufacturer is Pioneer DJ

Corporation, 1-1 Shin-Ogura, Saiwai-ku, Kawasaki-shi, Kanagawa, 212-0031 Japan

6 DAMAGES AND REMEDIES FOR BREACH

You agree that any breach of this Agreement’s restrictions would cause Pioneer DJ

irreparable harm for which money damages alone would be inadequate. In addition

to damages and any other remedies to which Pioneer DJ may be entitled, You agree

that Pioneer DJ may seek injunctive relief to prevent the actual, threatened or con-

tinued breach of this Agreement.

7 TERMINATION

Pioneer DJ may terminate this Agreement at any time upon Your breach of any

provision. If this Agreement is terminated, You will stop using the Program, perma-

nently delete it from your computer or mobile device where it resides, and destroy

all copies of the Program and Documentation in Your possession, confirming to

Pioneer DJ in writing that You have done so. Sections 2.2, 2.3, 2.4, 3, 4, 5, 6, 7 and 8

will continue in effect after this Agreement’s termination.

8 GENERAL TERMS

1 Limitation of Liability. In no event will Pioneer DJ or its subsidiaries be liable

in connection with this Agreement or its subject matter, under any theory

of liability, for any indirect, incidental, special, consequential or punitive

damages, or damages for lost profits, revenue, business, savings, data,

use, or cost of substitute procurement, even if advised of the possibility of

such damages or if such damages are foreseeable. In no event will Pioneer

DJ’s liability for all damages exceed the amounts actually paid by You to

Pioneer DJ or its subsidiaries for the Program. The parties acknowledge

that the liability limits and risk allocation in this Agreement are reflected in

the Program price and are essential elements of the bargain between the

parties, without which Pioneer DJ would not have provided the Program or

entered into this Agreement.

2 The limitations or exclusions of warranties and liability contained in this

Agreement do not affect or prejudice Your statutory rights as consumer and

shall apply to You only to the extent such limitations or exclusions are permit-

ted under the laws of the jurisdiction where You are located.

Severability and Waiver. If any provision of this Agreement is held to be

illegal, invalid or otherwise unenforceable, that provision will be enforced to

the extent possible or, if incapable of enforcement, deemed to be severed

and deleted from this Agreement, and the remainder will continue in full

force and effect. The waiver by either party of any default or breach of this

Agreement will not waive any other or subsequent default or breach.

No Assignment. You may not assign, sell, transfer, delegate or otherwise

dispose of this Agreement or any rights or obligations under it, whether

voluntarily or involuntarily, by operation of law or otherwise, without Pioneer

DJ’s prior written consent. Any purported assignment, transfer or delegation

by You will be null and void. Subject to the foregoing, this Agreement will be

binding upon and will inure to the benefit of the parties and their respective

successors and assigns.

Entire Agreement. This Agreement constitutes the entire agreement between

the parties and supersedes all prior or contemporaneous agreements or

representations, whether written or oral, concerning its subject matter. This

Agreement may not be modified or amended without Pioneer DJ’s prior and

express written consent, and no other act, document, usage or custom will

be deemed to amend or modify this Agreement.

6 You agree that this Agreement shall be governed and construed by and

under the laws of Japan.

Connections and part names

Connections

! Connect the power cord after all the connections between devices have been completed.

Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.

Refer to the operating instructions for the component to be connected.

! Be sure to use the included power cord.

! Be sure to use the USB cable included with this product or the one that conforms to USB 2.0.

Names of Parts

 Rear panel

5 5

3 9 db c e6 7 6 7 a2 4881

1 Kensington security slot

2 MASTER OUT 1 terminals

Connect powered speakers, etc., here.

! Compatible with XLR connector type balanced outputs.

3 MASTER OUT 2 terminals

Connect to a power amplifier, etc.

! Compatible with RCA pin-jack type unbalanced outputs.

4 BOOTH OUT terminals

Output terminals for a booth monitor, compatible with balanced or unbalanced

output for a TRS connector.

The master channel sound can be output from the [BOOTH OUT] terminals

regardless of the audio level set for the master channel.

The volume level can be adjusted with the [BOOTH MONITOR] control.

! The sound will be distorted if the level is raised too high when using unbal-

anced outputs.

5 SIGNAL GND terminal

Connects an analog player’s ground wire here. This helps reduce noise when the

analog player is connected.

6 PHONO terminals

Connect to a phono level (MM cartridge) output device. Do not input line level

signals.

You need to set the [LINE, PHONO, USB] selector switch on top of the unit to

[PHONO] beforehand.

7 LINE terminals

Connect to a DJ player or other line level device.

! You need to set the [LINE, PHONO, USB] selector switch on top of the unit to

[LINE] beforehand.

8 CD terminals

Connect to a DJ player or other line level device.

! You need to set the [CD, USB] selector switch on top of the unit to [CD]

beforehand.

9 MIC1 terminal

Connects a microphone here.

! Either an XLR connector or a phones plug (Ø 6.3 mm) can be used.

a MIC2 terminal

Connects a microphone here.

b USB-B terminal

Connect to a computer.

! Connect this unit to your computer directly via a USB cable included with

this product or the one that conforms to USB 2.0.

! A USB hub cannot be used.

c USB-A terminal

Connect to a computer.

! Connect this unit to your computer directly via a USB cable included with

this product or the one that conforms to USB 2.0.

! A USB hub cannot be used.

d u switch

This switches this unit’s power between on and standby.

e AC IN terminal

Connect the power cord after all the connections between devices have been

completed.

Be sure to use the included power cord.

 Front panel

1 PHONES jacks

Connect headphones here.

Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs (Ø 3.5 mm)

can be used.

! There are two input jacks, both a stereo phones jack and a mini phones jack,

but do not use both simultaneously. If both are used simultaneously, when

one is disconnected and/or connected, the volume of the other may increase

or decrease suddenly.

2 CROSS FADER CURVE selector switch

This switches the crossfader curve characteristics.

! The further the control is turned clockwise, the sharper the curve rises.

! The further the control is turned counterclockwise, the more gradually the

curve rises.

Connections and part names

Connecting the input/output terminals

 Connecting input terminals

Rear panel

AUDIO OUT

CON

Analog player

Microphone Microphone Computer

DJ player

DJ player DJ player

To power outlet

Power cord

(included)

Portable audio

device

Portable audio

device

 Connecting output terminals

Rear panel

Component, amplifier,

powered speaker, etc.

Power amplifier,

powered speakers, etc.

Power amplifier (for booth monitor),

powered speakers, etc.

Front panel

Headphones

Part names and functions

1 Browser section

2 Deck section

3 Mixer section

4 Effect section

Browser section

1 Rotary selector

Turn:

Moves the selection cursor in the DJ application.

[SHIFT] + turn:

Enlarges or reduces the enlarged waveform display of rekordbox dj.

Right turn enlarges the waveform display, and left turn reduces it.

Press:

Moves between the tree view area and track list area of rekordbox dj.

[Tree View] l [Track] list l [Tree View] l ...

! When [Tag List], [Palette bank1], and [Related Tracks] are displayed, also

moves between these areas.

[SHIFT] + press:

Registers or unregisters the selected track to/from [Tag List].

2 BACK button

Press:

Moves between the tree view and track list or opens and closes a folder.

[SHIFT] + press:

Changes the display depending on the state in [rekordbox dj] as shown below.

No display l [Tag List] displayed l [Palette bank1] displayed l [Palette

bank2] displayed l [Palette bank3] displayed l No display l …

Also, when [Tag List] is displayed, the cursor moves to the [Tag List] area.

3 LOAD (RELATED TRACKS) button

Press:

Loads the selected track to the deck.

Press twice:

Loads the track loaded in the deck not being operated to the deck on the opera-

tion side.

The playback position is also loaded in the same state.

[SHIFT] + press:

Displays [Related Tracks] if hidden and hides it if displayed.

No display l [Related Tracks] displayed l No display l …

Also, when [Related Tracks] is displayed, the cursor moves to the

[Related Tracks] area.

Deck section

This section is used to control the four decks. The buttons and controls for operating

decks 1 and 3 are located on the left side of the controller, those for operating decks

2 and 4 are located on the right side of the controller.

1 Jog dial display section

= Jog dial display section (p. 12 )

2 Jog dial

Turn top when VINYL mode is on:

Performs scratching operation.

Turn outer section or turn top when VINYL mode is off:

The pitch bend operation (adjustment of the playing speed) is possible.

[SHIFT] + Turn top:

Fast-forwards or fast-reverses.

3 NEEDLE SEARCH pad

By touching the pad, you can jump to the desired playback position in the track

loaded in the deck.

! In the environmental settings of rekordbox, you can set to enable to jump to

the desired playback position during pause or anytime.

4 JOG FEELING ADJUST control

This adjusts the load applied when the jog dial is spun.

The load gets heavier when turned clockwise, lighter when turned

counterclockwise.

5 VINYL SPEED ADJUST TOUCH/BREAK control

Adjusts the speed at which playback is slowed to the stopped state when the

stop operation is performed during playback.

6 MASTER TEMPO button

Press:

Turns the master tempo function on or off.

When the master tempo function is on, the key does not change even when the

playback speed is changed with the [TEMPO] slider.

[SHIFT] + press:

The [TEMPO] slider’s range of variation switches each time the button is

pressed.

±6% ±10% ±16% WIDE

7 Takeover indicator

When decks are switched, the sync function is off, or the master is switched

while synchronizing, the position of the controller’s [TEMPO] slider may not

match the software’s tempo (pitch). To regain control of the tempo from the

controller, adjust using the takeover indicator as reference. Slowly move the

[TEMPO] slider in the direction in which the takeover indicator lights. When

moved to the position at which the takeover indicator turns off, it matches the

software’s tempo (pitch) and the tempo can once again be controlled with the

[TEMPO] slider.

8 TEMPO slider

Use this to adjust the track playing speed.

Connections and part names

9 AUTO BEAT LOOP button

Press:

Turns manual loop and auto beat loop on or off.

[SHIFT] + press:

The loop registered in [rekordbox] can be set as the active loop.

Setting an active loop

! If pressing the [SHIFT] and [AUTO BEAT LOOP] buttons when a loop is reg-

istered in rekordbox and a track for which an active loop is not set is loaded,

the closest loop in a clockwise direction can be set as an active loop.

The function is invalid when a track which a loop is not registered to is loaded.

Canceling the active loop setting

! If pressing the [SHIFT] and [AUTO BEAT LOOP] buttons when a track for

which an active loop is set is loaded, the set active loop can be canceled.

a LOOP 1/2X button

Press:

Select the auto loop beat.

During loop playback, the length of loop playback is split in half each time this

button is pressed.

[SHIFT] + press:

During loop playback, moves the loop to the left by the amount equal to its

length. (Loop Move)

b LOOP 2X button

Press:

Select the auto loop beat.

During loop playback, the loop length is doubled each time this button is

pressed.

[SHIFT] + press:

During loop playback, moves the loop to the right by the amount equal to its

length. (Loop Move)

c LOOP IN button

Press:

Loop In Point is set.

When this button is pressed during loop playback, the loop in point can be fine-

adjusted using the jog dial.

[SHIFT] + press:

Moves to the loop in point.

Press for over 1 second:

Starts 4-beat looping.

d LOOP OUT button

Press:

The loop out point is set, and loop playback begins.

When this button is pressed during loop playback, the loop out point can be fine-

adjusted using the jog dial.

[SHIFT] + press:

Cancels loop playback. (Loop Exit)

After loop playback is canceled, playback returns to the previously set loop in

point and loop playback resumes. (Reloop)

e PARAMETERc button, PARAMETERd button

These set the various parameters for when using the performance pads.

= Using the performance pads (p. 16 )

f SEQUENCER START button

Press:

Starts playback of the recorded performance information (sequence).

When this button is pressed again during playback of a sequence, the playback

pauses. When this button is pressed while recording a sequence, new sequence

is overdubbed onto the sequence being played back.

g SEQUENCER OVERDUB button

Press:

Turns the overdub function on.

Enters the standby state for recording and starts recording performance infor-

mation when a pad is operated.

[SHIFT] + press:

Saves the recorded performance information to the sequencer.

h HOT CUE mode button

Press:

Sets the hot cue mode.

= Using hot cues (p. 16 )

[SHIFT] + press:

Sets the beat jump mode.

Using beat jump (p. 16 )

i PAD FX1 mode button

Press:

Sets the pad FX1 mode.

= Using the pad FX (p. 16 )

[SHIFT] + press:

Sets the pad FX2 mode.

= Using the pad FX (p. 16 )

j SLICER mode button

Press:

Sets the slicer mode.

= Using the Slicer function (p. 16 )

[SHIFT] + press:

Sets the slicer loop mode.

= Using the Slicer function (p. 16 )

k SAMPLER mode button

Press:

Sets the sampler mode.

= Using the sampler function (p. 17 )

[SHIFT] + press:

Sets the velocity sampler mode.

= Using the velocity sampler (p. 18 )

l CAPTURE button

Press:

Registers the loop being played to the sampler pad.

! This is enabled when looping is in a set state.

[SHIFT] + press:

Loads the sections in the target area of slicer or slicer loop to separate sampler

slots.

! This is enabled in slicer mode or slicerUsing effects in the multi FX mod loop

mode.

! For detailed instructions on slicer and slicer loop, see the rekordbox soft-

ware’s manual.

m Performance pads

Various performances can be achieved using the pads.

= Using the performance pads (p. 16 )

n PLAY/PAUSE f button

Press:

Use this to play/pause tracks.

o CUE button

Press:

Sets, plays and calls out cue points.

! When the [CUE] button is pressed during pause, the cue point is set.

! When the [CUE] button is pressed during playback, the track returns to the

cue point and pauses. (Back Cue)

! When the [CUE] button is pressed and held after the track returns to the cue

point, playback continues as long as the button is pressed. (Cue Sampler)

[SHIFT] + press:

Returns to the beginning of the track.

p QUANTIZE button

Turns quantize on or off.

q SYNC button

Press:

Switches between synchronizing and not synchronizing (SYNC ON/OFF) to the

tempo of the master deck.

[SHIFT] + press:

Use this to set the track loaded in this unit as the master for the beat sync

function.

r SHIFT button

When another button is pressed while pressing the [SHIFT] button, a different

function is called out.

s DECK 3 button

Switches the deck to be operated to deck 3.

t DECK 1 button

Switches the deck to be operated to deck 1.

u GRID SLIDE button

Press:

When the jog dial is turned while pressing the [GRID SLIDE] button, the overall

beat grid can be slid to the left or right.

[SHIFT] + press:

Doubles the interval for beat grids.

v GRID ADJUST button

Press:

When the jog dial is turned while pressing the [GRID ADJUST] button, the beat

grid interval can be adjusted.

[SHIFT] + press:

Halves the interval for beat grids.

w SLIP button

Press:

Turns the slip mode on and off.

= Using the slip mode (p. 18 )

[SHIFT] + press:

This switches the vinyl mode on/off.

x SLIP REVERSE button

Press:

Performs reverse playback only while pressed.

Slip reverse play is automatically canceled after 8 beats have elapsed even if the

[SLIP REVERSE] button is kept pressed. The playback returns to normal after

reverting to the background.

[SHIFT] + press:

Switches between forward playback and reverse playback.

y FX PANEL button

Press:

(During normal operation)

Switches [FX] panel display.

(During standby status)

The standby mode is canceled.

[SHIFT] + press:

Displays or hides [SAMPLER] panel display.

Mixer section

1 2 2 2 23 4 3 4

t t t t

x x x x

w w w w

v v v

y y

s s s s

u u u u

1 OFF, ON, TALK OVER selector switch

Turns the microphone on/off.

2 USB connection indicator

Displays the connection status between the USB-A terminal and USB-B

terminal.

Lights: When the computer is connected to the terminal and the driver is

installed

Flashes: When the computer is connected to the terminal and the driver is not

installed

Lights out: When the computer is not connected to the terminal

3 USB (A) button

When lights, the USB-A terminal is used in communication with the computer.

! The [USB (A)] button and [USB (B)] button located at the left side are used to

control the USB communication for deck 1 or deck 3. The [USB (A)] button

and [USB (B)] button located at the right side are used to control USB com-

munication for deck 2 or deck 4.

! When the [USB (A)] button or [USB (B)] button located on the left side is

flashing, it means the deck 1 or deck 3 audio is on air. Flashing stops when

the channel fader of deck 1 or deck 3 is moved to the frontmost position.

When the [USB (A)] button or [USB (B)] button located on the right side is

flashing, it means deck 2 or deck 4 audio is on air. Flashing stops when the

channel fader of deck 2 or deck 4 is moved to the frontmost position. (When

the USB terminal is switched, sound is also switched instantaneously.

Therefore, when the button is flashing, before switching the USB terminal,

make sure that the deck is not used by another user.)

4 USB (B) button

When lights, the USB-B terminal is used in communication with the computer.