Atdec SD-POS-M Datasheet

Category
Mounting kits
Type
Datasheet

This manual is also suitable for

Atdec SD-POS-M-BB

The Atdec SD-POS-M-BB is a versatile display mount designed to support a wide range of POS applications. It offers a robust construction, supporting displays up to 11kg (24.2lbs) in weight. The back-to-back mount configuration allows for the mounting of two displays, providing a convenient and space-saving solution for dual-screen setups.

The mount features a generous range of motion, including 355° of rotation and ±40° of tilt. This flexibility enables optimal positioning of the displays to suit diverse viewing angles and ergonomic requirements. Additionally, the mount can be configured with rotation limitations (0-90°, 0-180°, 0-270°) to restrict movement within a specific range.

Atdec SD-POS-M-BB

The Atdec SD-POS-M-BB is a versatile display mount designed to support a wide range of POS applications. It offers a robust construction, supporting displays up to 11kg (24.2lbs) in weight. The back-to-back mount configuration allows for the mounting of two displays, providing a convenient and space-saving solution for dual-screen setups.

The mount features a generous range of motion, including 355° of rotation and ±40° of tilt. This flexibility enables optimal positioning of the displays to suit diverse viewing angles and ergonomic requirements. Additionally, the mount can be configured with rotation limitations (0-90°, 0-180°, 0-270°) to restrict movement within a specific range.

Dimensions
NOTE: This product has been designed to mount 12”(30cm) - 24”(61cm) displays. It will suit VESA compliant
displays with 75mmx75mm (3”x3”) & 100mmx100mm (4”x4”) hole patterns only. It will support displays up
to a maximum weight of 11kg (24.2lbs). The back to back will support 2 x 11kg (24.2lbs) displays.
Mounting Plate Footprint
Cable Access Hole
37mm x 43mm
(1
7
/16” x 1
11
/16”)
NOTE: If cable access
through the post and work
surface is required, you will
need to drill a Ø45mm
cable access hole. (Refer to
Installation Instructions.)
150mm (5
7
/8”)
TM
Technical Specifications
SPACEDEC
DISPLAY
POS Multi
Rotation
or
USER
USER
Gap in
Rotation
Gap in
Rotation
270°
180°
90°
270°
180°
90°
355°
355°
Your POS Multi offers 355° of Rotation.
This can also be limited to suit a
specific application.
The Direction in which you mount POS Multi
will determine where the 5° gap in Rotation
is located, and how you choose to limit the
rotation.
Direction
Arrow
Direction
Arrow
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 01.02.08 ©
Locking Hole (Fixed)
0-180° Locking Hole
0-270° Locking Hole
0-90° Locking Hole
Direction Arrow
Locking Holes (Refer to Installation Instructions for further details)
OD
Ø50.8mm
(2”)
84mm
3
5
/16
370mm
(14
9
/16”)
330mm
(13”)
375mm
(14¾”)
70.7mm
2
13
/16
96mm
(3¾”)
190mm
(7½”)
Back to Back Mount
M4 Tapped
Holes
±40° Rotation
about central
axis.
Ball Assembly
Each Ball Assembly has 40 degrees rotation about it’s
central axis.
244mm
(9½”)
Ø106mm
(4
3
/16”)
ID
Ø46mm
(1
13
/16”)
Install Security
Cable around
Internal Post
Rotation Options
0° Rotation (Fixed)
0-90° Rotation
0-180° Rotation
0-270° Rotation
0-355° Rotation
  • Page 1 1

Atdec SD-POS-M Datasheet

Category
Mounting kits
Type
Datasheet
This manual is also suitable for

Atdec SD-POS-M-BB

The Atdec SD-POS-M-BB is a versatile display mount designed to support a wide range of POS applications. It offers a robust construction, supporting displays up to 11kg (24.2lbs) in weight. The back-to-back mount configuration allows for the mounting of two displays, providing a convenient and space-saving solution for dual-screen setups.

The mount features a generous range of motion, including 355° of rotation and ±40° of tilt. This flexibility enables optimal positioning of the displays to suit diverse viewing angles and ergonomic requirements. Additionally, the mount can be configured with rotation limitations (0-90°, 0-180°, 0-270°) to restrict movement within a specific range.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI