Ethernet Over VDSL2
Converter (PSE)
VDS-0120
H/W Version: 1
Overview for VDSL2 Media Conveters
Ethernet over VDSL2 Media Converters are
innovative solutions from LevelOne that greatly
extend LAN distances. These media converters
send Ethernet packets at extended distances
by converting and then transmitting using
advanced VDSL2 protocols. This allows system
installers to use regular telephone wire (RJ-11)
to reach incredible distance of up to 300meters
with a maximum transfer speed of 100Mbps/
60Mbps. These media converters reach 3 times
farther than the regular Cat.5 Ethernet cabling.
No additional network devices are needed; all
data is transmitted using inexpensive, easy-to-
deploy RJ-11 telephone wiring.
Can a media converter also act as a PSE?
In the 802.3af Power over Ethernet standard,
a PSE stands for Power Sending Equipment,
a device that can send power to another
compatible device. VDS-0120 is an Ethernet
to VDSL media converter as well as a PSE. In
addition to sending data over an RJ-11 cable
up to 300 meters, it can also send both power
and data using the local RJ-45 port. This added
functionality puts the most exible deployment
solutions right at the System Installers ngertips.
Fast data transfer rates, easy installation
Using VDSL technology, VDS-0120 allows
users to achieve 100 Mbps download and
60 Mbps upload speeds. A great point-to-
point networking solution for even the most
bandwidth-hungry applications. With easy plug
and play installation, SIs will have no problem
using these simple yet powerful devices on their
next project.
Key Features
- Compliance with IEEE802.3, IEEE802.3u and
VDSL/VDSL2
- Provides One Piano Switch for Mode
Conguration
- Low-Latency for Video/Voice/Data Applications
- 802.3af PoE PSE compatible(VDS-0120)
- 802.3af PoE PD compatible(VDS-0130)
VOI-7100
PoE IP Phone
Works Well With
2
1. LEDs
2. Dip Switch
3. Power Port
4. VDSL2 Interface
5. 10/100Mbps Port
FCS-1081
PoE IP Camera
3 4 51