Phase Technology CM1001D User manual

Category
Soundbar speakers
Type
User manual
Key Features
• One254mm(10.0in)polypropylenewoofer.
• 150Wattoptionaltransformerandhigh
output(115.5dB)forthesoundrein-
forcementandPAmarkets.
•Rapidinstallationblind-mount,fixed-
wingmountingmechanismmount-
ingmechanismwithconstanttension
designaffixestoceilingthicknesses
rangingfrom6.4mm(0.25in)to42.9
mm(1.69in).
•Separatetool-freemagneticgrille&
bezelassemblyforeaseofinstall&
in-fieldpainting.
•Iridite-platedsteelgrillewithprotective
powder-coatedfinishforlastingdurability.
•Easyaccess5-positionselectabletap
switchfor25,70.7,100Voltandlow
impedanceapplicationssimplifies
ordering&inventorytracking.
93.5dBsensitivity(1w/1m)
offershigh-
outputcapabilities&reducedamplifica-
tioncosts.
• UL2043&1480approvalpending.
•Includedaccessories:Tilebridge,
Euroblockconnector&paintmask.
•Optionalaccessories:Pre-construction
bracket,junctionbox.
Description
TheCM1001disan10”in-ceiling
subwooferdesignthatdeliversadditional
low-endresponse(40Hz)forsatellite/
subwooferapplications.TheCM1001d
speakerdesignincorporatesalow-profile
grilleand5-positiontapswitchwith4Ohm
direct.Allmountinghardwareisincluded
andfeaturesafastandsecurefixed-wing
mountingsystem.
Applications
Designedforin-ceilingbackground
subwooferapplications,theCM1001d
includesaproprietaryfixed-wingcon-
stant-tensionmountingsystemforease
ofinstallation.Truelow-endresponse(40
Hz)andhighsensitivity(93.5dB1W/1M)
maketheCM1001didealforadditional
bassresponseinconventioncenters,air-
portsandotherlargevenuein-ceiling
subwooferapplications.
Patented SoundTube
Technologies
SoundTubeEntertainmentisconstantly
developingnewtechnologiesthatenhance
audioproductperformance.SoundTube
CM1001d
In-Ceiling Speaker
Technical Information for System Engineers
© 2007 SoundTube Entertainment. All rights reserved. PN TS-CM590 REV 11.06.07
SoundTube continually develops new product innovations and improvements. Updates to existing
products without prior notice are an example of SoundTube’s drive for constant improvement.
Tile bridge included
Specifications: CM1001d
System Type
Impedance (nominal)
1
Sensitivity dB @ 2.83V/1M
Sensitivity dB @ 1W/1M
2
Distance Factor
Frequency Response (- 3 dB)
3
Frequency Response (-10 dB)
3
Max. Program Power
4
Max. Continuous Power RMS
5
Max. UL program power
Max. Power SPL @ 1 M
6
Max. SPL @ x% distortion
7
Coverage Angle (-6 dB @ 2 kHz)
Coverage Angle (-6 dB @ 10 kHz)
Directivity Factor (Q)
Directivity Index (DI) dB
Tap Selector
Transducer - Low Frequency Driver
Transducer - High Frequency Driver
Low Frequency Voice Coil
Crossover Frequency
Network Type: Low Pass
Network Type: High Pass
Enclosure Material
Motor-board
Grille
Inputs
Colors
Backcan Diameter
Backcan Height
Visible Diameter
Visible Height
Mounting Hole Diameter
Min / Max Ceiling Thickness
Weight
Shipping Weight
Accessories
Included
Optional
Packaging
10” Subwoofer, in-ceiling, ported (150 Watt optional
transformer for 25/70.7/100 Volt or 4 ohm direct)
4 ohm
96.5dB
93.5dB
N/A
53 Hz - 120 kHz
40 Hz - 300 kHz
300w
150w
100w
115.5dB
N/A
N/A
N/A
N/A
N/A
5-Position rotary switch with 4 ohm direct
254mm (10in) Polypropylene cone, butyl rubber surround
N/A
35.0mm 1.38in
100.0 kHz
6dB per octave, 1st order
N/A
Drawn steel backcan with ABS baffle
N/A
Iridite-plated steel with powder-coat finish
4 Pin, 5mm Euroblock for individual or daisy chain connection
Black or white
11.68 in / 296.7 mm
11.77 in / 299.0 mm
14.76 in / 374.9 mm
1.08 in / 27.4 mm
12.75 in / 323.9 mm
0.25 in / 6.4 mm – 1.69 in / 42.9 mm
27.0 lb / 12.3 kg
32.0 lb / 14.5 kg
Tile bridge, Euroblock connector & installation aid
Pre-Construction Bracket (AC-CM8-PCB),
Junction Box (AC-CM-JBOX)
1 per box
Transformer Taps
70.7 V Output 100 V Output 25 V Output
Impedance listed per IEC 60268-5 with
a minimum less than 80% the nominal
impedance
1w1m sensitivity determined using
nominal impedance
Frequency response measured in half
or full space as dictated by speaker
mounting configuration
Max program power is 3 dB above max
continuous power
Continuous power rating, EIA-426-B test
Max output based on max continuous power
Max useable SPL based on testing
by NWAA Labs
1
2
3
4
5
6
7
150w 115.5dB
75w 112.5dB
38w 109.5dB
19w 106.5dB
150w 115.5dB
75w 112.5dB
38w 109.5dB
19w 106.5dB
9.5w 103.5dB
4.8w 100.5dB
2.4w 97.5dB
Technical data, EASE
plots, SoundTubeSPEC
software & product downloads available at www.soundtube.com
Entertainmentinnovationsareprotectedbymul-
tipleU.S.&internationalpatents,whichexplicitly
coverSoundTubedome,enclosureanddispersion
technologies.SoundTubeEntertainmentactively
defendsitspatentsinordertoprotectSoundTube
resellersandendusers.
Technical Data and
Specification Tools
Technical Data
SoundTubeEntertainmentstrivestoprovide
completeandeffectivetechnicalinformation
anddatatodealers,engineersanddesigners.
AlldataareavailablefromSoundTubeEnter-
tainmentoratwww.soundtube.com.
Data Acquisition
 AllperformancedataacquiredatSoundTubes
TechnicalMeasurementCenter(TMC)are
analyzedusingavarietyofstandardmeasure-
menttechniques,includingMeasuredLength
Sequence(MLS)andTimeDelaySpectrometry
(TDS).Performance,developmentanddata
acquisitiontoolsinclude:GoldLineTEF20,CLIO,
LMS,LEAP,andproprietarymodelingsoftware.
EASE
dataareacquiredthroughanautomated
CLIO/Outline/EASE
interface.
EASE™ Data
–3-Dpolarplots.
SoundTubeSPEC™
–ProprietarySoundTube
speakerplacementsoftware.
Architectural Specifications
Theloudspeakershallconsistofa254mm
(10.0in)low-frequencytransducerwithafrequen-
cy-dividingnetworkinstalledintheventedenclo-
sure.Thelow-frequencyvoicecoildiametershall
be35.0mm(1.38in).
Performancespecificationsofatypicalproduc-
tionunitshallbeasfollows:Useablefrequency
responseshallextendfrom40Hz–300Hz(-10dB,
halfspace,noexternalequalization).Measured
sensitivity(1watt,1meter)shallbeatleast93.5
dB.Thespeakershallhaveanominalimped-
anceof4Ohmsandbeavailablefor25,70.7&100
Voltmodeswithvoicecoil/4Ohmdirect.The
frequency-dividingnetworkshallhaveacrossover
frequencyof100Hzwitha6dBperoctave(1st
order)slopeforthelowpassfilter.Ratedpower
capacityshallbeatleast150Wattscontinuouspower
(RMS)andconformtoEIA-426-Btesting.Maximum
continuousoutputat1metershallbe115.5dB.
InstallationfortheCM1001dshallbeby2-screw
blind-mount,constant-tensionwingedassembly
andshallattachtoceilingthicknesstolerances
rangingfrom6.4mm(0.25in)to42.9mm(1.69in).
Thefixed-wingassemblyshallbeconstructedof
iridite-plated,powdercoatedsteel.Theexternal
110.0
100.0
dBSPL
90.0
80.0
70.0
60.0
20
100
1K
10K
Hz
20K
-180.0
-108.0
-36.0
36.0
108.0
Deg
180.0
50.0
40.0
Ohm
30.0
20.0
10.0
0.0
10 100 1K 10K Hz 20K
-108.0
-36.0
36.0
108.0
180.0
Deg
252.0
Impedance
Phase
Phase/Impedance Reponse
Frequency Response
CM1001d
In-Ceiling Speaker
Technical Information for System Engineers
wiringinputconnectorshallbea4-pin,5mm
Euroblockfor4Ohmordistributedsystems
andshallacceptfrom10–22gaugewire.
Themaximumbackcandimensionsshall
benomorethan299mm(11.77in)inheight
by296.7mm(11.68in)indiameter.Themaxi-
mumvisibledimensionsshallbenomore
than27.4mm(1.08in)inheightby374.9mm
(14.76in)indiameter.Thebackcanshallbe
constructedofiridite-platedsteel.
Thesystemshallincludea16-gaugegalva-
nizedsteelsupportbackingplate(tilebridge)
toreinforcetheceilingmaterialandtilesup-
portrails.Themaximumtilebridgedimen-
sionsshallbenomorethan600.1mm(23.62
in)inlengthby428.2mm(16.86in)inwidth
and10.4mm(0.41in)inthicknesswith325.1
mm(12.80in)cutoutforspeakermounting.
Thegrilleshallbeconstructedofiridite-
plated,powder-coatedsteelwithanABS
bezelforlastingperformance.Theaffixed
grilleandbezelshallbemountedtothe
speakerenclosure(backcan)viamagnetic
strip.Alsoincludedareapaintmaskforin-
fieldpaintingandaninstallationaidthat
servesasahandholdduringmounting.
TheCM1001dhasanoptionalPre-Con-
structionBracket(AC-CM8-PCB)thatshall
becompatiblewithanoptionalJunctionBox
(AC-CM-JBOX).An18-gaugewirewhipand
Euroblockconnectorshallbeincludedwith
thejunctionbox.Themaximumdimensions
ofthePre-ConstructionBracketshallbeno
morethan635mm(25.0in)inlengthby457.2
mm(18.0in)inwidthand127mm(5.0in)in
thicknesswitha326.5mm(12.85in)cutout
forspeakermounting.
ThesystemshallbetheSoundTube
CM1001dsubwooferforbothlow&high
impedanceapplications.
SoundTube Entertainment
6430 North Business Park Loop
Park City, Utah 84098
Phone 435.647.9555
Fax 435.647.9666
Toll Free 800.647.TUBE
www.soundtube.com
All SoundTube products come
with a 5-year limited warranty.
SoundTube Entertainment manufactures a complete line of speakers for:
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing
All SoundTube products are designed and engineered in the USA.
CM1001d
In-Ceiling Speaker
Technical Information for System Engineers
Included Accessories
Fixed Wing Mounting System
Min.
4 mm ( 0.16 in)
Tile Bridge
600.1 mm
(23.62 in)
325.1 mm
(12.80 in)
Paint Mask
428.2
(16.86 in)
Max.
49 mm (1.91 in)
Optional Accesories
Pre-Construction Bracket (AC-CM8-PCB) Junction Box (AC-CM-JBOX)
Suspension Cable & Hardware
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Phase Technology CM1001D User manual

Category
Soundbar speakers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI