HI 917N
L17'' X D15
4
8
'' X H19
1
8
''
I
4
2
K2
2+2
3
- This product contains small components, please ensure that they are
kept away from small children.
- THIS INSTRUCTION BOOKLET CONTAINS
A
L1
C
4
LEFT VIEW
RIGHT VIEW
1
4
6
3
2
5
1
6
9
9
B
CB SCREW M3.5 X 12MM
12
L1
DRAWER SLIDE 14"
L
CB SCREW M4 X 25MM
B
C
4
K2
POWER NAIL
6
8
"
12
D
K2
K1
9
11
10
11
F
12
13
D
D
F
CB SCREW M4 X 35MM
- Attach 2 x Panel (11) into Panel (9). Then, attach 1 x Panel (10) into both Panel (11) & insert 8 x CB Screw
M4 x 35mm (D) using a Philips head screwdriver. Repeat for the next Drawer box.
- Attach 2 x Handle 2838 (K1) to Panel (9) front with 4 x P/H Screw M4 x 36mm (K2) using a
Philips head screwdriver.
- Slot 1 x Panel (12) into Panel (11) groove & use 6 x Power nail (F) for fix it. Knock by using a hammer.
Repeat for the next Drawer box.
- Attach 1 x Panel (13) into the base of Drawer box. Insert 2 x CB screw M4 x 35mm (D) using a Philips
head screwdriver. Repeat for the next Drawer box.
11
11
CB SCREW M3.5 X 12MM
12
L2
CSK CAP M6 X 40MME
2
1
2
CAP
DRAWER SLIDE 14"
ALLEN KEY
I2
L2
B
BOTTOM VIEW
7
4
2
5
3
1
J
H
E
G
J
I2
4MINIFIX 5654
- Assemble 2 x Drawer slide (L2) to both Panel (11) with 6 x CB Screw M3.5 x 12m (C) using Philips head
screwdriver. Repeat same step for the next Drawer box.
- Insert 4 x Minifix 5654 (I1) into Panel (7) base using a Philips head screwdriver.
- Attach Panel (2) & (4) into Panel (1).
- Attach Panel (3) & (5) into Panel (1) with 2 x CSK Cap M6 x 40mm (E) & tighten with Allen Key (G).
Insert 2 x Cap (J).
11
11
L2
I2
E
G
J
6
H
B
I1
G
J
7
B CB SCREW M3.5 X 12MM
4
CSK CAP M6 X 40MME
2
1
4
ALLEN KEY
G
PVC LEG STUD (L&R)
H
6
CAP
J
I1
MINIFIX 5654
I1
2+2
- Attach Panel (6) into Panel (2), (3), (4) & (5) with 2 x CSK Cap M6 x 40mm (E) & tighten with Allen Key (G).
Insert 2 x Cap (J).
- Fix 2 x Pvc leg stud (H) into Panel (1) & (6) left side with 2 x CB Screw M3.5 x 12mm (B) & tighten with
Philip Head Screw driver.
- Fix 2 x Pvc leg stud (H) into Panel (1) & (6) right side with 2 x CB Screw M3.5 x 12mm (B) & tighten with
Philip Head Screw driver.
- Attach panel (7) to Panels (1) & (6), insert 4 x Minifix (I1), tighten with Allen key (G). Insert 4 x Cap (J).
6
1
6
1
BACK VIEW
F
8
9
9
- Fix 1 x Panel (8) into the back of Night Stand & use 20 x Power nail (F) for fix it. Knock by using a hammer.
- Slide the drawer box into the drawer slide at the Panel (1) & (6).
POWER NAIL
6
8
"
20
F
Job Complete !
In the interest of our environment please dispose of all packaging throughtfully.
/
