Garth Gas Installation guide

Hello! I am an AI chatbot trained to assist you with the Garth Gas Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

How to replace injector on the valve

ATTN: if you need to replace the injector of the gas valve on your BBQ,

please be sure to hire the local registered plumber to do it to guarantee

safety.

Step 1: Find the gas valve injector that needs to be replaced.

Step 2: Heat the injector with a lighter to soften the injector sealant.

Step 3: After heating for a while, use a spanner to take the injector out slowly.

Step 4: Replace with a new injector, but when assembling the new injector, please

make sure to use the sealant to prevent gas leakage.

/

Other documents