TRUE FINE TD10037W User manual

Brand
TRUE FINE
Model
TD10037W
Category
Motorcycle Accessories
Type
User manual

TRUE FINE TD10037W is a wall sconce that provides warm and inviting ambient lighting to your living space. The fixture is easy to assemble and requires only basic tools. It includes all the necessary hardware for mounting and supports the use of standard-base bulbs, allowing you to customize the brightness and warmth of the light.

TRUE FINE TD10037W is a wall sconce that provides warm and inviting ambient lighting to your living space. The fixture is easy to assemble and requires only basic tools. It includes all the necessary hardware for mounting and supports the use of standard-base bulbs, allowing you to customize the brightness and warmth of the light.

Instruction Manual
Wall Sconce
Customer Service: [email protected]
PACKAGE CONTENTS
DESCRIPTION QUANTITY
AFixture 1
BGlass shade 1
CScrew 2
DSemicircle part 2
PART
Mounting plate
(Not actual size)
B
AA B
BB B B
CC DD
HARDWARE CONTENTS(shown actual size)
SAFETY INFORMATION
WARNING
PREPARATION
Long
monting
screw
x 2
Long
monting
screw
x 2 x 1
x 3
Wire nut
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
• TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before
beginning installation by removing fuse (or switching off circuit breaker).
• MINIMUM 90°C SUPPLY CONDUCTORS.
Estimated Assembly Times: 25 minnutes
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or
damaged, do not attempt to assemble the product.
Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver,
Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Print in china
A
C
D
B
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
2.
6.
Attach the mounting plate (DD) to the
outlet box (not included) with the long
mounting screws (CC).
Install light bulb (not included). Use one
standard-base bulbs.
2
Hardware Used
Long mounting screw
Mounting plate
x
2
x
1
3
CC
DD
BB
3. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers
(not included), black to black (power) and
white to white (neutral). Attach copper
wire to ground wire. Helpful hint:
If necessary, attach copper ground wire
to grounded outlet box.
36
4
BB
4. Attach wire nuts (BB).Tape wire nuts (BB)
and wires together.
Print in china
Hardware Used
x
Wire nut
B
DD
CC
5. Align the 2 screws(AA) through the holes
of the back plate, and fix them with screw
nuts
Hardware Used
5
AA
DD
A
DD
AA
Long mounting screw
Mounting plate
x 2
x 1
1. Put glass shade (B) onto fixture (A), clamp
the glass shade (B) with semicircle part (D),
and finally lock it with screw (C).
1
A
A
B
C
D
  • Page 1 1
  • Page 2 2

TRUE FINE TD10037W User manual

Brand
TRUE FINE
Model
TD10037W
Category
Motorcycle Accessories
Type
User manual

TRUE FINE TD10037W is a wall sconce that provides warm and inviting ambient lighting to your living space. The fixture is easy to assemble and requires only basic tools. It includes all the necessary hardware for mounting and supports the use of standard-base bulbs, allowing you to customize the brightness and warmth of the light.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents