2. Juno
  3. L-Type Track Adapter

Juno L-Type Track Adapter User manual

  • Hello! I've reviewed the installation instructions for the L-Type Track Adapter. The document details the steps for proper installation, including aligning the polarity line, securing the latch, and adjusting the second circuit contact. I'm ready to help with any questions you might have.
  • What should I do after inserting the adapter box into the track?
    How do I adjust the second circuit contact?
    Which contact is adjustable for the second circuit?
INSTALLATION INSTRUCTIONS
For L-Type Track Adapter Option
1300 S. Wolf Road • Des Plaines, IL 60018 • 800-323-5068 •www.acuitybrands.com
©2017 Acuity Brands Lighting, Inc. Rev 4/18 P4678
1 of 1
Find the latch and the polarity line. Align
parts as shown below and insert the
adapter box into the track.
Latch on adapter Rotate in the direction
of the "Install" arrow
Continue to rotate until the latch snaps
in place between the two track rails. Final Position
Latch snaps into place between rails
Second Circuit Positioning
1. Hold onto Adapter Box with one hand
2. Place the end of a flat head screw driver under the contact shown below
3. Gently pull up, the contact should move vertically until hitting a hard stop
4. Follow instructions for inserting into track
Ground contact
Final Position
SAVE THESE INSTRUCTIONS
Find contact above the ground contact.
This is the only contact that is adjustable.
Polarity line
Continue to depress latch until
final position
Coming Soon
/