2. Bessey
  3. Mitre Clamping System MCX

Bessey Mitre Clamping System MCX User manual

  • Hello, I have analyzed the instruction manual for the BESSEY Mitre clamping system MCX. This document details how to properly use the mitre clamp, including inserting the correct adapters, adjusting the clamping force, and fitting it to different angles. I'm ready to answer any questions you have about the device.
  • What angles of adapters are available for the Mitre clamping system?
    What is a recommended clamping width of the screw clamp?
    What is the important thing to remember about the adapter installation?
40 37474 a
BESSEY Tool GmbH & Co. KG Mühlwiesenstraße 40 74321 Bietigheim-Bissingen, Germany
Fon +49 7142 401-0 Fax: +49 7142 401-452 E-Mail: info@bessey.de www.bessey.de
C
B1
A
B2
22,5°
45°
30°
60°
Klick!
1
3
2
Klick!
10/2021
S
imply better.
Simply better.
Mitre clamping system MCX
Instructions for use
1 Insert adapter 22.5° (A), 30° (B1), 60° (B2) or
45° (C) into basic unit.
2 Press the clamping jaws onto the workpiece
using the stepless adjustment device and
tighten them using the set screws.
IMPORTANT: Adapters must be symmetrical
to each other.
3 By rotating the handle of the clamp, the
clamping jaws move in the direction of the
arrow until the desired clamping pressure
is reached.
NOTE: recommended clamping width of
the screw clamp 300 mm.
Practical accessory for BESSEY screw clamps TG,GZ, GMZ, EHZ, EZS, DUO and EZL / EZXL
/