Metra 99-2007 allows for seamless integration of aftermarket radios into select Cadillac Escalade, Escalade ESV, Escalade EXT, and STS models. It provides both ISO DIN and double DIN radio provisions, enabling compatibility with a wide range of head units. The included pocket offers additional storage space, while the matte black finish matches the OEM dashboard for a cohesive look. Installation is simplified with the included brackets and screws, ensuring a secure and professional fit.
Metra 99-2007 allows for seamless integration of aftermarket radios into select Cadillac Escalade, Escalade ESV, Escalade EXT, and STS models. It provides both ISO DIN and double DIN radio provisions, enabling compatibility with a wide range of head units. The included pocket offers additional storage space, while the matte black finish matches the OEM dashboard for a cohesive look. Installation is simplified with the included brackets and screws, ensuring a secure and professional fit.
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 3/7/23 INST99-2007
INSTALLATION INSTRUCTIONS
99-2007
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT FEATURES
• ISO DIN radio provision with pocket
• Double DIN radio provision
• Painted matte black to match OEM finish
KIT COMPONENTS
• A) Radio housing • B) Radio housing trim panel • C) Radio brackets • D) Pocket • E) #8 x 3/8” Phillips screws (4)
TOOLS REQUIRED
• Panel removal tool • Small flat blade screwdriver
• Phillips screwdriver • Socket wrench
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation ...................................................4-5
Kit Assembly
-ISO DIN radio provision with pocket ............... 6-7
-DDIN radio provision .........................................7-8
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness:
Visit metraonline.com for audio/
video and steering wheel control interface options.
Antenna Adapter: 40-CR10
A B C D E
Cadillac Escalade, Escalade ESV,
Escalade EXT 2007-2014
STS 2005-2011
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
386.257.1187
|
MetraOnline.com
2
(Figure B) (Figure D)
(Figure A) (Figure C)
DASH DISASSEMBLY
Cadillac Escalade, Escalade ESV,
Escalade EXT 2007-2014
1. Unclip and remove cup holder and
ashtray assembly. (Figure A)
2. Unclip and remove the trim panel above
the glove box including the a/c vent.
(Figure B)
3. Unclip and remove the entire panel
surrounding the radio including the a/c
vents. (Figure C)
4. Remove (6) 9/32” screws to extract radio
from dash. (Figure D)
Continue to Kit Preparation
REV. 3/7/2023 INST99-2007 3
(Figure A) (Figure B)
DASH DISASSEMBLY
Cadillac STS 2005-2011
1. Unclip and remove the entire panel
surrounding the radio including the a/c
vents. (Figure A)
2. Remove (4) 10mm bolts to extract radio
from dash. (Figure B)
Continue to kit assembly.
386.257.1187
|
MetraOnline.com
4
KIT PREPARATION
Cadillac Escalade, Escalade ESV,
Escalade EXT 2007-2014
1. Cut and remove the shaded areas
marked with an “S” only from the radio
housing. (Figures A, B)
Note: Do not remove the tab marked
with both “S” and “E”.
Continue to kit assembly.
(Figure A) (Figure B)
S
S
S
S
S
S
Remove shaded areas Remove shaded areas
REV. 3/7/2023 INST99-2007 5
Cadillac STS 2005-2011
1. Cut and remove the shaded areas
marked with an “E” only from the radio
housing. (Figures A, B)
Note: Do not remove the tab marked
with both “S” and “E”.
Continue to kit assembly.
(Figure A) (Figure B)
E
E
E
E
E
E
E
E
Remove shaded areas Remove shaded areas
KIT PREPARATION
386.257.1187
|
MetraOnline.com
6
KIT ASSEMBLY
Cadillac Escalade, Escalade ESV,
Escalade EXT 2007-2014
ISO DIN mount radio provision with pocket
Note: Refer also to the instructions included
with the aftermarket radio.
1. Flip the radio housing brackets upside
down then snap them to the inside edge
of the radio housing. (Figure A)
2. Slide the pocket into the top of the
opening aligning the holes in the radio
housing brackets with the bosses on the
pocket and secure using the provided
#8 x 3/8” screws (4). (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
(Figure B) (Figure D)
(Figure A) (Figure C)
4. Slide the ISO DIN radio into the opening
below the pocket and secure the unit to
the kit using the screws supplied with
the radio. (Figure C)
5. Snap the radio housing trim plate onto
the front of the radio housing.
(Figure D)
6. Reassemble dash in reverse order of
disassembly.
REV. 3/7/2023 INST99-2007 7
KIT ASSEMBLY
Cadillac Escalade, Escalade ESV,
Escalade EXT 2007-2014
DDIN radio provision
Note: Refer also to the instructions included
with the aftermarket radio.
1. Attach the radio housing brackets to
the inside edge of the radio housing.
(Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
(Figure B)
(Figure A) (Figure C)
3. Slide the Double DIN radio into the radio
housing bracket assembly and secure
the unit using the screws supplied with
the radio. (Figure B)
4. Snap the radio housing trim plate onto
the front of the radio housing. (Figure C)
5. Reassemble dash in reverse order of
disassembly.
386.257.1187
|
MetraOnline.com
8
Cadillac STS 2005-2011
ISO DIN mount radio provision with pocket
Note: Refer also to the instructions included
with the aftermarket radio.
1. Flip the radio housing brackets upside
down then snap them to the inside edge
of the radio housing. (Figure A)
2. Slide the pocket into the top of the
opening aligning the holes in the radio
housing brackets with the bosses on the
pocket and secure using the provided
#8 x 3/8” screws (4). (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
(Figure B) (Figure D)
(Figure A) (Figure C)
4. Slide the ISO DIN radio into the opening
below the pocket and secure the unit to
the kit using the screws supplied with
the radio. (Figure C)
5. Snap the radio housing trim plate onto
the front of the radio housing.
(Figure D)
6. Reassemble dash in reverse order of
disassembly.
KIT ASSEMBLY
REV. 3/7/2023 INST99-2007 9
Cadillac STS 2005-2011
DDIN radio provision
Note: Refer also to the instructions included
with the aftermarket radio.
1. Attach the radio housing brackets to
the inside edge of the radio housing.
(Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
(Figure B)
(Figure A) (Figure C)
3. Slide the Double DIN radio into the radio
housing bracket assembly and secure
the unit using the screws supplied with
the radio. (Figure B)
4. Snap the radio housing trim plate onto
the front of the radio housing. (Figure C)
5. Reassemble dash in reverse order of
disassembly.
KIT ASSEMBLY
386.257.1187
|
MetraOnline.com
10
REV. 3/7/2023 INST99-2007 11
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.edu or call
386-672-5771 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 3/7/23 INST99-2007
INSTALLATION INSTRUCTIONS
99-2007
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 7:00 PM
Sunday: 10:00 AM - 4:00 PM
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Metra 99-2007 allows for seamless integration of aftermarket radios into select Cadillac Escalade, Escalade ESV, Escalade EXT, and STS models. It provides both ISO DIN and double DIN radio provisions, enabling compatibility with a wide range of head units. The included pocket offers additional storage space, while the matte black finish matches the OEM dashboard for a cohesive look. Installation is simplified with the included brackets and screws, ensuring a secure and professional fit.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Metra 95-2009 Operating instructions
-
-
-
Metra 99-5841B User manual
-
-
-
-
Metra 95-3003G Operating instructions
-
Metra INST-3304 User manual
-
Metra 99-7639HG User manual
Other documents
-
Metra Electronics 952001 User manual
-
Metra Electronics AW-200GM User manual
-
Metra Electronics 02-3002 User manual
-
Metra Electronics 99-9013HG User manual
-
Metra Electronics 99-6520B Installation Instructions Manual
-
Metra Electronics 99-4505 User manual
-
Metra Electronics 99-8249 User manual
-
Metra Electronics 99-7431 Installation Instructions Manual
-
Mercury 99-5815 User manual
-
Axxess AXGMLN-02 Installation Instructions Manual
