Pipishell PISM02 User manual

Brand
Pipishell
Model
PISM02
Type
User manual

Pipishell PISM02 is a soundbar bracket designed to mount soundbars below TVs. Compatible with VESA patterns of 75 x 75mm (3" x 3") to 600 x 400mm (23.6" x 15.7") and weighing less than 22 lbs (10kg). The bracket includes hardware for attaching to both the TV and soundbar, and comes with various spacers and bolts to accommodate different TV and soundbar configurations. The bracket allows for height adjustment to ensure optimal sound positioning, and the clamps can be adjusted to fit a variety of soundbar sizes. The bracket is designed to be easy to install and includes all necessary hardware.

Pipishell PISM02 is a soundbar bracket designed to mount soundbars below TVs. Compatible with VESA patterns of 75 x 75mm (3" x 3") to 600 x 400mm (23.6" x 15.7") and weighing less than 22 lbs (10kg). The bracket includes hardware for attaching to both the TV and soundbar, and comes with various spacers and bolts to accommodate different TV and soundbar configurations. The bracket allows for height adjustment to ensure optimal sound positioning, and the clamps can be adjusted to fit a variety of soundbar sizes. The bracket is designed to be easy to install and includes all necessary hardware.

Soundbar Bracket
INSTRUCTION
MANUAL
Rev02(A)
PISM02
(US/CA) 1-800-556-9829
(UK) 44-808-196-3885
[email protected]
WWW. www.pipishellav.com
Before getting started,
let's make sure this mount is compatible.
22 lbs
（10kg）
Yes - Perfect!
No - This mount is NOT
compatible.
Yes - Perfect!
No -This mount is NOT compatible.
Is the VESA
pattern of your TV
75 x 75mm (3" x 3")
to 600 x 400mm
(23.6" x 15.7") ?
1
Does the equip-
ment you intend to use
weigh less than 22 lbs
(10kg) ?
2
Tools Needed
(NOT lncluded)
3
Important Safety
Information
4
· Avoid potential injuries and property damage!
· DO NOT use this product for any purpose that is NOT explicitly
specified in this manual. DO NOT exceed weight capacity. We are NOT
liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
· Before starting assembly, verify all parts are included and undam-
aged. DO NOT use damaged or defective parts. lf you require replace-
ment parts, please contact our Technical Support line at
1-800-556-9829 (US/CA) / 44-808-196-3885 (UK) or Customer
Service at [email protected].
CAUTION
· This product contains small parts that may pose a choking hazard.
· This soundbar bracket is designed to be installed and utilized only as
specified in this manual.
· This soundbar bracket is ONLY designed to mount BELOW the
television.
WARNING
NOTE
· Please read and understand these directions.
· Refer to the documentation that came with your soundbar, your TV and
your TV wall mount for additional guidance.
· Carefull read all instructions before attempting installation. If you DO
NOT understand the instructions or have any questions or concerns, please
contact our Technical Support line at 1-800-556-9829 (US/CA) /
44-808-196-3885 (UK) or Customer Service at [email protected].
· Not all hardware included in this package will be used.
Phillips
Screwdriver
02
W
H
Contents
Hardware for Attaching the Brackets to the TV
M6
[B1] x 4
M8
[B2] x 4
L2.5mm
[F1] x 4
L22mm
[F2] x 4
Washers
Spacers
M6
M4
M8
M8 x 30mm
[E1] x 4
M8 x 50mm
[E3] x 4
M8 x 65mm
[E4] x 4
M6 x 30mm
[D1] x 4
M4 x 30mm
[C1] x 4
M4 x 50mm
[C2] x 4
M6 x 50mm
[D2] x 4
M8 x 40mm
[E2] x 4
TV Bolts
03
Hardware for Attaching the Brackets to the Soundbar
Soundbar Bolts
Keyhole Screw
[g] x 2
Knob
[h] x 2
M6
[d] x 2
M8
[e] x 2
M8
[f] x 2
M4 M4 x 10mm
[a1] x 2
M5
M6
Washers
M5 x 16mm
[b] x 4
M6 x 16mm
[c] x 4
M4 x 16mm
[a2] x 4
Vertical Bracket
01 x 1
Bracket
04 x 2
Connecting Rod
03 x 2
Vertical Bracket
02 x 1
Clamp
05 x 2
04
CAUTION: Follow your TV mount’s manual for instructions on how to
safely remove your TV and TV bracket.
NOTE: Your TV wall mount may vary from the illustrations throughout
this manual — the procedure to install the soundbar is the same.
a. If your TV brackets fit inside the
vertical soundbar brackets, follow
Figure a.
b. If your TV brackets do not fit
inside the vertical soundbar
brackets, follow Figure b.
Step 1 Prepare your TV [If mounted]
a b
05
1 2
TOSS
3
2-2 Spacer and Bolt Configurations
2-1 Select TV Bolts
Hand thread bolts into the threaded inserts on the back of your TV to determine which
bolt (M4, M6 or M8) to use. A minimum of 4-5 turns into the threading is required. Do
not turn past the bottom of the hole.
Step 2 Attach the TV Brackets and Vertical Brackets to the TV
M6 M8
M4
06
Bump
See Option C
Curved TV
See Option B
Cables
See Option D
Recessed Holes
See Option E
Flat Back TV
See Option A
2-3 Attach the TV Brackets and Vertical Brackets to Your TV
Add spacers if needed to fit the bolt length and TV back.
07
Option A: For Flat Back TVs
D
O
N
O
T
o
v
e
r
t
i
g
h
t
e
n
(If needed)
B1/B2
F1/F2
C1/D1/E1
0102
Knob facing
outward
0201
Knob facing
outward
0201
Option C: For TVs with a Bump
Option B: For Curved TVs
Spacers must be tall enough so that the curved back of the TV
does not interfere with the mounting plate.
The TV brackets must be flush on the bump and leveled by spacers over the gap.
08
D
O
N
O
T
o
v
e
r
t
i
g
h
t
e
n
B1/B2
F1/F2
C2/D2/E2
/E3/E4
(If needed)
B1/B2
F1
C1/D1/E1
D
O
N
O
T
o
v
e
r
t
i
g
h
t
e
n
B1/B2
F1/F2
C2/D2/E2
/E3/E4
Option E: For TVs with Recessed Holes
Option D: For TVs with Protruding Cables
Spacers [F1], [F2] need to fill in the recessed holes on the back of the TV, while
keeping the TV brackets as close to the TV as possible.
Use spacers [F1] or [F2] to create extra space between the TV and TV brackets.
D
O
N
O
T
o
v
e
r
t
i
g
h
t
e
n
B1/B2
C2/D2/E2
/E3/E4
F1/F2
D
O
N
O
T
o
v
e
r
t
i
g
h
t
e
n
B1/B2
C2/D2/E2
/E3/E4
F1/F2
09
3-1 Slightly loosen the knobs on both vertical brackets.
3-2 Insert the connecting rods [03] into the vertical brackets, then slide the brackets
[04] onto the connecting rods. Do not secure them before choosing the soundbar
bracket configuration on Page 11.
Step 3 Assemble the Bottom Brackets
Phillips
Screwdriver
(Not lncluded)
10
04
04
03
03
3-3 Measure the distance between the mounting holes on your soundbar / width of
your soundbar.
3-4 Based on your soundbar measurements, choose a proper bracket configuration
(See following figures.)
Back-Mounted Keyhole Slots
Soundbar Width
Phillips
Screwdriver
(Not lncluded)
3-5 Retighten the knobs, and secure the
brackets [04] with washers [d] and bolts [b].
11
04
04
d
b
Bottom-Mounted Threaded Inserts
Page 12
Page 13 - 14
Step 4 Attach the Soundbar (Not Included)
Option A: For soundbar with back-mounted keyhole slots
Insert the keyhole screws [g] into the keyholes on the back of the soundbar, then
secure to the mount with knobs [h] and washers [f].
A: For soundbar with back-mounted keyhole slots, follow the instruction on page 12.
B: For soundbar without any mounting holes or with bottom-mounted threaded inserts,
go to page 13 and 14.
12
h
g
h
g
g
h
Option B: For soundbar without any mounting holes or with bottom-
mounted threaded inserts
Slightly loosen the bolts underneath to extend the clamps.
13
Turn over the TV. Hang the clamps onto the brackets, making sure the hooks fit over
the brackets.
05
Phillips
Screwdriver
(Not lncluded)
05
05
Phillips
Screwdriver
(Not lncluded)
Place soundbar on the clamps, then adjust the
clamps to fit and secure by retightening the
bolts. Also, tighten the bolts securing the clamps.
14
Phillips
Screwdriver
(Not lncluded)
Step 5 Adjust the Soundbar Height (Optional)
NOTE: Depending on the type of TV wall mount you have, you may need to
remove your TV from the wall to adjust the soundbar height.
CAUTION: Make sure to support your soundbar with one hand while moving it.
15
860-00538-00 Rev02 16
Step 6 Reattach the TV
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Pipishell PISM02 User manual

Brand
Pipishell
Model
PISM02
Type
User manual

Pipishell PISM02 is a soundbar bracket designed to mount soundbars below TVs. Compatible with VESA patterns of 75 x 75mm (3" x 3") to 600 x 400mm (23.6" x 15.7") and weighing less than 22 lbs (10kg). The bracket includes hardware for attaching to both the TV and soundbar, and comes with various spacers and bolts to accommodate different TV and soundbar configurations. The bracket allows for height adjustment to ensure optimal sound positioning, and the clamps can be adjusted to fit a variety of soundbar sizes. The bracket is designed to be easy to install and includes all necessary hardware.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents