Hangzhou Kuman Electronic Commerce CZ-1 WiFi Smart Motorized Socket User guide

Type
User guide

This manual is also suitable for

Model No
InputAC110-250V Output: 10A-16A
APPSmart Life WiFi: 2.4G_WiFi
WiFi connection
One App control your home
QI wireless charger
Night lamp
Bluetooth speaker
Voice control
Control your device anywhere
Device Sharing
User Guide
WiFi Smart Motorized Socket
IFunctional description
QI wireless charger
Up/Down button
LED night lamp control
button
Socket module power
control button
ON
OFF
Reset switch(ON/OFF)
Power cord
LED night lamp
Bluetooth speaker outlet
Socket module
USB module
1、Dow n l o a d APP
Smart Life
II Touch button instructions
IIINetwork pairing process
>、Make sure the reset switch at the bottom is in the ‘ON’ state
>、Your Smart phone or tablets has connected to a 2.4G WiFi with internet
>、Not allow to hide WiFi(SSID).
>、Do not set "not allow Wi-Fi squatter" or MAC address limits on routers
Preparation before use
>、Click--Up/Down
>、Press 7 seconds to power on (red )/off (blue)
>、LED night lamp open/close/ brightness control
>、Click-Socket output power on(red )/off (blue)
>、Press 7 seconds for WiFi pairing (red light flashing)
2、 I f p e rm i ss i on r eq u e st a pp e ar s in A PP , p l e as e a l l ow i t
3 R eg i st e r a n ac c ou n t a n d l o g i n
In APP store or Google search‘Smart Life’
Cancel
2.9K
Lif estyle
Smart Life - Smart Living
Smart Life
Log In
China
Please enter your account
Password
Log In
Forgot Password
Login means that you agree with and User Agreement
Privacy Policy.
ON
OFF
4、 Connected power supply and turn on the bottom reset switch
to “ON” position.
5Observe the LED: If the red LED fast blinks (twice a second), is in
pai r ing mo de, di rect ne xt st e p. If the re d LED is no t in fa st bli nks
(twice a second), press the button for 7s until the red LED fast blinks
(twice a second).
7、 Se l e c t ‘Others’ ①-> ‘O t h e rs(Wi-Fi)
Add Manually
Auto Scan
Others
Sensors
Large Home
Appliances
Small Home
Appliances
Kitchen
Appliances
Exercise
Health
Security&
Video Surv...
Gateway
Control
Ene rgy
Entertainme
nt
Industry&
Agriculture
Oth ers
Universal
Remote Control
Universal
Remote Control
(Wi-Fi+BLE)
Others
(Wi-Fi)
Others
(Zigbee)
Connector
Others
(BLE)
Others
(NB-loT)
Others
Smart Speaker
Connector
(Wi-Fi)
6T a p ‘ + ’ or ‘Add Device’ t o a d d a n e w device
No devices
Home Sm ar t Me
Add Device
My home
Welcome Home
Se t y o ur h om e l oc a t i o n f o r m or e i nf o r m a t i on
Al l D e v i c e s
9、 Select ‘Confirm the indicator is blinking rapidly’, click ‘Next
8I n p u t y our home WiFi pa s s w o rd, click ‘Next
Cancel
Select 2.4 GHz Wi-fi Network and
enter password.
Next
If your Wi-fi is 5GHZ , please set it to be 2 . 4GHz.
Common router setting method
WI-Fi - 5Ghz
WI-Fi - 2.4Ghz
H3C_1F8D49
18181818
Cancel EZ Mode
Reset the device first.
Power on the device and confirm that the indicator is
blinking rapidly.
Note : please complete the network distribution within
3 minutes after resetting the device .
Perform net pairing as prompted.
Confirm the indicator is blinking rapidly.
Cancel
Adding device...
Ensure t ha t th e Wi - Fi si gnal is g o o d.
01:56
Scan
devi ces.
Register
on Cloud.
Initialize
the device.
Next
11The control interface appears after successful configuration
1 . Device name
2 . Device Information
3 . Al speaker control
4 . Offline Notification
5 . Share Device
6 . Create Group
7 . FAQ & Feedback
8 . Add to Home Screen
9 . Check Device Network
10 . Device Update
11 . Remove Device
10、Co m p l ete and can renam e n e w d e vice
Done
Added .
Smart Motorized socket
off
UP
off of f
S e t t i n g S w i t c h D O W N
Socket power
L i g h t i n g s e t off
ok
state
Smart Motorized socket
IVAuxiliary function of voice control -- wake-up control via voice
(Note: This function is configured according to requirements. See
the product markings for details.)
Wake-up control: Hello, smart socket’ ‘Hello ,socket(When
awakening, the blue lamp in the center of the panel will light up, which
can be controlled by voice. After 30 seconds, the blue lamp will turn
off automatically. If need voice control, please awaken again.)
Rise and fall: ‘Go upGo down
Light: Turn on the light’ ‘Turn off the light
Socket module power on/power off:‘Open socket’‘Close socket
VBluetooth speaker accessories (Note: This function is configured
according to requirements. See the product markings for details.)
Bluetooth speaker connection: Open the bluetooth settings of the
phone, find the bluetooth device "SNZE-A", and click to connect
VIOthers
If the WiFi pairing failed: please press the reset switch and then "retry
the above steps" or "switch pairing mode" to connect; If fail several
times, please check FAQs for details.
Close Report Issue
Connection timed out
Check demerit points and retry
1
2
3
Check if the device has been reset and
the indicator is blinking quickly.
Retry
Switch Pairing Mode
More device-pairing FAQs
Check if it is 2 . 4 GHz Wi-fi.
Verify the Wi-Fi password.
FAQ: Pairing failed, timeout
1Check WiFi password, try again
2、Restart Router, try again
3、Try Compatible Pairing Mode
4Read Help Center or Fill in the feedback
FAQ & Feedback
sky
Bind Mobile Number
Ho m e M a nageme n t
Message Cen ter
More Servic es
Settings
Home Smart Me
Why the device offline after successful connected?
If this happened, please check it according to following methods:
1.Whether the equipment power connected or not?
2.Whether the equipment has a power cut or internet cut?
If happened, need 2-3 minutes to reconnected.
3.Whether the network, where the equipment located stable?
Checking way: Put your mobile or iPad at the same network, then try
to open the web page.
4.Whether the home Wi-Fi network is working or not?
If modified Wi-Fi name or password, ect, need to reset the device to
re-add.
5.If the network is working, thus t he d e v i c e still o ffline, please check
whether there are too man y Wi-Fi c o n ne cted? You can try to restart
the router, reset the device power. Then w a i t for 2 -3 minutes to see
this device can be online or not?
If all above ways tried and still problem exist, suggest to remove the
device, then re-add. If there is still problem, please select the device in
APP filled the user feedback and submitted. Our engineer will check it.
VII、 Technical parameters
Input Voltage110V-250V,50Hz-60Hz
Rated output10A□ 13A□ 15A□ 16A□
USB outputDC18W
Wireless chargingQI/15W
IP ratingIP65
Flame retardant ratingUL/V0
Ambient temperature-20℃~+50℃
Open hole dia.ø125mm
Tabletop/countertop thickness8mm-60mm
Outline dimensionSee figures as below
136mm
136mm
136mm
96mm
181mm
141mm
226mm
186mm
271mm
、Installation instruction
Opening sizeø 125mm
Tabletop/countertop thickness
8mm-60mm
Main body
Metal compacting
auxiliary ring
Clamp ring
Adjustable
screw
Installation steps:
1、Open the hole according to requested size
2、Put the main body in the hole from above
3、Install the metal compacting auxiliary ring from below
4、Install the clamp ring from below
5、Adjust the length of the three screws on the clamp ring according to
the actual installation requirements
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a class B
digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequence energy and,if not
installed and used in accordance with the instructions,may cause harmful interference to
radio communications.However,there is no guarantee that interference will not occur in a
particular installation.if this equipmemt does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off and on,the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an autlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minumum distance of 20 cm
between the radiator and your body.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Hangzhou Kuman Electronic Commerce CZ-1 WiFi Smart Motorized Socket User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI